Synthesis and photophysical properties of fluorescent 2,5-dibenzoxazolylphenols and related compounds with excited state proton-transfer

A series of new 2,5-dibenzoxazolylphenols and related compounds was prepared by condensation of hydroxy- and methanesulfonamidoterephthalic acids with 2-aminophenols. These displayed excited state intramolecular proton-transfer fluorescence at room temperature and above with quantum yields as high as 0.48 and emission peaks of 492-517 nm. The methanesulfonamido group was found about as effective a proton donor as the phenolic hydroxyl group. Incorporation of substituents onto the benzoxazole moieties increased solubility of the fluors in hydrocarbon solvents in some cases, but reduced quantum yields. These fluors are of interest as wavelength shifters in a scintillating detecting medium for ionizing radiation.     

Reaction products with internal energy beyond the kinematic limit result from trajectories far from the minimum energy path: an example from H + HBr --> H2 + Br

The importance of reactive trajectories straying far from the minimum energy path is demonstrated for the bimolecular reaction H + HBr --> H2(v', j') + Br at 53 kcal/mol collision energy. Product quantum state distributions are measured and calculated using the quasi-classical trajectory technique, and the calculations indicate that highly internally excited H2 products result from indirect reactive trajectories with bent transition states. A general argument is made suggesting that reaction products with internal energy exceeding a kinematic constraint can, in general, be attributed to reactive collisions straying far from the minimum energy path.     

Investigation of the Removal of Lead by Adsorption onto 1‐(2‐Thiazolylazo)‐2‐Naphthol (TAN) Imbedded Polyurethane Foam from Aqueous Solution

A new preconcentration method is presented for lead on TAN‐loaded polyurethane foam (PUF) and its measurement by differential pulse anodic stripping voltammetry (DPASV). The optimum sorption conditions of 1.29 × 10^?5 M solution of Pb(II) ions on TAN‐loaded PUF were investigated. The maximum sorption was observed at pH 7 with 20 minutes equilibrated time on 7.25 mg mL^?1 of TAN‐loaded foam. The kinetic study indicates that the overall sorption process was controlled by the intra‐particle diffusion process. The validity of Freundlich, Langmuir and Dubinin ‐ Radushkevich adsorption isotherms were tested. The Freundlich constants 1/n and K_F are evaluated to be 0.45 ±0.04 and (1.03 +0.61) × 10^?3 mol g^?1, respectively. The monolayer sorption capacity and adsorption constant related to the Langmuir isotherm are (1.38 ± 0.08) × 10^?5 mol g^?1 and (1.46 ± 0.27) × 10⁵ L mol^?1, respectively. The mean free energy of Pb(II) ions sorption on‐TAN loaded PUF is 11.04 ± 0.28 kJ mol^?1 indicating chemisorption phenomena. The effect of temperature on the sorption yields thermodynamics parameters of ΔH, ΔS and ΔG at 298 K that are 15.0 ± 1.4 kJ mol^?1, 74 ±5 J mol^?1 K^?1 and ‐7.37 ± 0.28 kJ mol^?1, respectively. The positive values of enthalpy (ΔH) and entropy (ΔS) indicate the endothermic sorption and stability of the sorbed complexes are entropy driven. However, the negative value of Gibb's free energy (ΔG) indicates the spontaneous nature of sorption. On the basis of these data, the sorption mechanism has been postulated. The effect of different foreign ions on the sorption and desorption studies were also carried out. The method was successfully applied for the determination of lead from different water samples at ng levels.     

Electrical properties of a-Ge<Subscript>x</Subscript>Se<Subscript>100-<Emphasis Type="Italic">x</Emphasis></Subscript>

In general, the conductivity in chalcogenide glasses at higher temperatures is dominated by band conduction (DC conduction). But, at lower temperatures, hopping conduction dominates over band conduction. A study at lower temperature can, eventually, provide useful information about the conduction mechanism and the defect states in the material. Therefore, the study of electrical properties of Ge_xSe_100-x in the lower temperature region (room temperature) is interesting. Temperature and frequency dependence of Ge_xSe_{100-x (x} = 15, 20 and 25) have been studied over different range of temperatures and frequencies. An agreement between experimental and theoretical results suggested that the behaviour of germanium selenium system (Ge_xSe_100-x ) have been successfully explained by correlated barrier hopping (CBH) model.     

Electrical properties of nickel-doped arsenic trisulphide

Results of temperature and frequency dependent a.c. conductivity of pure and nickel-doped a-As₂S₃ are reported. The a.c. conductivity of pure As₂S₃ obeys a well-known relationship: σ_ac ∝ω ^s. Frequency exponents is found to decrease with increasing temperature. Correlated barrier hopping (CBH) model successfully explains the entire behaviour of a.c. conductivity with respect to temperature and frequency for pure As₂S₃. But a different behaviour of a.c. conductivity has been observed for the nickel doped As₂S₃. At higher temperatures, distinct peaks have been observed in the plots of temperature dependence of a.c. conductivity. The frequency dependent behaviour of a.c. conductivity (σ_ac ∝ω ^s) for nickeldoped As₂S₃ is similar to pure As₂S₃ at lower temperatures. But at higher temperatures, ln σ_ac vs lnf curves have been found to deviate from linearity. Such a behaviour has been explained by assuming that nickel doping gives rise to some neutral defect states (D ^0′) in the band gap. Single polaron hopping is expected to occur between theseD ^0‘ andD ⁺ states. Furthermore, allD ⁺,D ^0′ pairs are assumed to be equivalent, having a fixed relaxation time at a given temperature. The contribution of this relaxation to a.c. conductivity is found to be responsible for the observed peak in the plots of temperature dependence of a.c. conductivity for nickel-doped As₂S₃. The entire behaviour of a.c. conductivity with respect to temperature and frequency has been explained by using CBH and “simple pair” models. Theoretical results obtained by using these models, have been found to be in agreement with the experimental results.     

Studies on the stereoselective hydroboration of vinyl ethers

The diastereoselective hydroboration/oxidation of several asymmetric vinyl ethers is presented.     

Flow of Newtonian and Non-Newtonian Fluids Through Packed Beds: An Experimental Study

The phenomena of flow reduction and flow enhancement was observed in case of viscoelastic and viscoinelastic fluids flowing through packed beds, respectively. In this study, the pressure drop-flow rate behaviors for the flow of Newtonian (water), non-Newtonian viscoinelastic (Carboxy methyl cellulose solution in water, CMC) and viscoelastic (Polyacrylamide solution in water, PAA) fluids have been experimentally studied and pressure drop behavior compared with existing models for viscoinelastic and viscoelastic fluids. Based on the observed data, an appropriate empirical correlation for pressure drop prediction in case of non-Newtonian fluid flowing through packed bed has been proposed. The correlation predicts the data well to within a reasonable accuracy.     

Normalizing molecular docking rankings using virtually generated decoys

Drug discovery research often relies on the use of virtual screening via molecular docking to identify active hits in compound libraries. An area for improvement among many state-of-the-art docking methods is the accuracy of the scoring functions used to differentiate active from nonactive ligands. Many contemporary scoring functions are influenced by the physical properties of the docked molecule. This bias can cause molecules with certain physical properties to incorrectly score better than others. Since variation in physical properties is inevitable in large screening libraries, it is desirable to account for this bias. In this paper, we present a method of normalizing docking scores using virtually generated decoy sets with matched physical properties. First, our method generates a set of property-matched decoys for every molecule in the screening library. Each library molecule and its decoy set are docked using a state-of-the-art method, producing a set of raw docking scores. Next, the raw docking score of each library molecule is normalized against the scores of its decoys. The normalized score represents the probability that the raw docking score was drawn from the background distribution of nonactive property-matched decoys. Assuming that the distribution of scores of active molecules differs from the nonactive score distribution, we expect that the score of an active compound will have a low probability of having been drawn from the nonactive score distribution. In addition to the use of decoys in normalizing docking scores, we suggest that decoy sets may be a useful tool to evaluate, improve, or develop scoring functions. We show that by analyzing docking scores of library molecules with respect to the docking scores of their virtually generated property-matched decoys, one can gain insight into the advantages, limitations, and reliability of scoring functions.     

A Remarkable cis‐ and trans‐Spanning Dibenzylidene Acetone Diphosphine Chelating Ligand (dbaphos)

A multidentate and flexible diolefin–diphosphine ligand, based on the dibenzylidene acetone core, namely dbaphos ( 1 ), is reported herein. The ligand adopts an array of different geometries at Pt, Pd and Rh. At Pt^II the dbaphos ligand forms cis‐ and trans‐diphosphine complexes and can be defined as a wide‐angle spanning ligand. ¹H NMR spectroscopic analysis shows that the β‐hydrogen of one olefin moiety interacts with the Pt^II centre (an anagostic interaction), which is supported by DFT calculations. At Pd⁰ and Rh^I, the dbaphos ligand exhibits both olefin and phosphine interactions with the metal centres. The Pd⁰ complex of dbaphos is dinuclear, with bridging diphosphines. The complex exhibits the coordination of one olefin moiety, which is in dynamic exchange (intramolecular) with the other “free” olefin. The Pd⁰ complex of dbaphos reacts with iodobenzene to afford trans‐[Pd^II(dbaphos)I(Ph)]. In the case of Rh^I, dbaphos coordinates to form a structure in which the phosphine and olefin moieties occupy both axial and equatorial sites, which stands in contrast to a related bidentate olefin, phosphine ligand (“Lei” ligand), in which the olefins occupy the equatorial sites and phosphines the axial sites, exclusively.     

Assessment of natural radioactivity in soil samples and comparison of direct and indirect measurement of environmental air kerma rate

This study presents the high purity germanium (HPGe) gamma spectrometric measurement of natural radioactivity mainly due to ²²⁶Ra, ²³²Th and ⁴⁰K in soil samples collected in Ferozepur and Faridkot district of Punjab, India. ²²⁶Ra activity varied from 28.6 to 51.1 Bq kg⁻¹ with the mean of 39.7 Bq kg⁻¹. The range and mean activity of ²³²Th were 42.9–73.2 and 58.2 Bq kg⁻¹, respectively. ⁴⁰K activity was in the range of 470.9–754.9 Bq kg⁻¹ with the mean of 595.2 Bq kg⁻¹. The air kerma rate (AKR) at 1 m height from the ground was also measured using gamma survey meter in all the sampling locations, which was ranging from 92.1 to 122.8 nGy h⁻¹ with the mean of 110.6 nGy h⁻¹. The radiological parameters such as Ra_eq and activity index of the soil samples were also evaluated, which are the tools to assess the external radiation hazard due to building materials. The mean and range of the Ra_eq values were 168.7 and 132.9–210.4 Bq kg⁻¹, respectively, whereas the activity index varied from 0.5 to 0.8 with the mean value of 0.62. These indices show that the indoor external dose due to natural radioactivity in the soil used for the construction will not exceed the dose criteria. The AKR was also evaluated from soil activity concentration and altitude correction of cosmic radiation contribution. The statistical tests such as Pearson correlation, spearman rank correlation, box and whisker plot, the Wilcoxon/Mann–Whitney test and chi-square test, were used to compare the measured AKR with evaluated AKR, which indicates good correlation.