Access to L- and D-iminosugar C-glycosides from a D-gluco-derived 6-azidolactol exploiting a ring isomerization/alkylation strategy

A flexible synthetic access to six-membered L- and D-iminosugar C-glycosides is reported starting from the easily available 6-azido-6-deoxy-2,3,4-tri-O-benzyl-D-glucopyranose precursor. This methodology involves a highly diastereoselective tandem ring enlargement/alkylation and a stereocontrolled ring contraction. It allows an efficient synthesis of iminosugar C-glycosides displaying structural diversity at both C-1 and C-6.     

Comparative study of the oxidative and thermal stability of vegetable oils to be used as lubricant bases

Demand for lubricating oils is increasing in the growing Brazilian economy. The use of vegetable bases in exchange of minerals can bring socio-economic and environmental benefits for Brazil. The purpose of this study is to compare the thermal and oxidative stability of vegetable oils related to the bases commonly used as lubricants. In this study, thermogravimetric analysis of castor oil, cotton oil, macauba’s almond oil, passion oil, paraffinic mineral oil, naphthenic oil (NH-140) and synthetic oil (Etro) was performed in inert and oxidative atmosphere to study the thermal and oxidative degradation of the vegetable oils related to the most common lubricants’ oils base. These oils’ oxidation stability were determined by standard procedures (ISO 6886). The use of mineral oil’s additives in these vegetable oils was tested to verify the viability of these additives to improve the oxidative stability of the vegetable oils. The castor oil and the cotton oil presented results of thermal analysis similar to the mineral and synthetic bases values. The castor oil was the only vegetable oil that showed a great oxidative stability. All other vegetable oils had their oxidative stability significantly increased by the additives.     

A dinuclear copper(II) complex with adeninate bridge ligands and prominent DNA cleavage activity. Structural and spectroscopic characterization and magnetic properties

A new dinuclear copper(II) complex has been synthesized and structurally characterized: [Cu(mu-ade)(tolSO3)(phen)]2.2H2O (Hade = adenine, tolSO3- = toluenesulfonate anion). Its magnetic properties and electronic paramagnetic resonance (EPR) spectra have been studied in detail. The compound has two metal centers bridged by two adeninate NCN groups. The coordination geometry of the copper(II) ions in the dinuclear entity is distorted square pyramidal, with the four equatorial positions occupied by two phenanthroline N atoms and two N atoms from different adenine molecules. The axial position is occupied by one sulfonate O atom. Magnetic susceptibility data show antiferromagnetic behavior with an estimated exchange constant of -2J = 65 cm-1. The EPR spectrum has been obtained at both X- and Q-band frequencies; a study at different temperatures has been carried out at the latter. Above 20 K, the Q-band spectra are characteristic of S = 1 species with a small zero-field splitting parameter (D = 0.0970 cm-1). A detailed study of the DNA-complex interaction has been performed. The title complex efficiently cleaves the pUC18 plasmid in the presence of reducing agents. Both the kinetics and the mechanism of the cleavage reaction are examined and described herein.     

Drop Size Distribution Bimodality and Its Effect on O/W Emulsion Viscosity

The research work on why and how distribution bimodality tends to reduce the viscosity of a particulate suspension is reviewed. The transfer of the corresponding concepts to emulsions requires some statistical tools, and becomes particularly easy with probability scale plotting which is reviewed. Viscosity reduction can be attained for different kinds of fine and coarse emulsion associations. The results are shown to depend on the characteristics of the base emulsions as well as on the way they are mixed.     

Dynamically modified silica — the use of bare silica in reversed-phase high-performance liquid chromatography

A new approach to reversed-phase high-performance liquid chromatography has been developed and investigated in some detail. Bare silica is used as the column packing material with an aqueous eluent containing a buffer, an organic solvent as the modifier and a long-chain quaternary ammonium ion. The eluent exhibits a high affinity to the silica surface at pH values above 5, thus, dynamically, forming a nonpolar stationary phase.     

Synthesis and Characterization of a [Mn12O12(O2CR)16(H2O)4] Complex Bearing Paramagnetic Carboxylate Ligands. Use of a Modified Acid Replacement Synthetic Approach

Summary.  A new modified approach for the synthesis of Mn₁₂ clusters, based on the use of complex [Mn₁₂O₁₂(O₂C ^t Bu)₁₆(H₂O)₄] (2) as starting material to promote the acidic ligand replacement, is presented here. This new synthetic approach allowed us to obtain complex [Mn₁₂O₁₂(O₂CC₆H₄N(O^•) ^t Bu)₁₆(H₂O)₄] (3), whose preparation remained elusive by direct replacement of the acetate groups of Mn₁₂Ac (1). Complex 3 bearing open-shell radical units, was prepared to increase the total spin number of its ground state, and consequently, to increase T _B , with the expectation that the radical ligands may couple ferromagnetically with the Mn₁₂ core. Unfortunately, magnetic measurements of complex 3 revealed that the sixteen radical carboxylate ligands interact antiferromagnetically with the Mn₁₂ core to yield a S = 2 magnetic ground state. Corresponding author. E-mail: vecianaj@icmab.es Received March 27, 2002; accepted May 2, 2002     

The role of steric and electronic interactions in the stereocontrol of the asymmetric 1,3-dipolar reactions of 5-ethoxy-3-p-(S)-tolylsulfinylfuran-2(5H)-ones with diazoalkanes: theoretical calculations and experimental evidences

The addition of diazomethane and diazoethane to (5S,SS)- and (5R,SS)-5-ethoxy-3-p-tolylsulfinylfuran-2(5H)-ones (1a and 1b) and their 4-methylderivatives (2a and 2b) proceeded in almost quantitative yields and complete regioselectivity. The observed pi-facial selectivity is determined by the configurations at both C-5 and the sulfinyl group, the later being the most important. The syn adducts were almost exclusively obtained from 1a and 2a in apolar solvents but the pi-facial selectivity was strongly decreased in more polar solvents. On the other hand, the major adducts from 1b and 2b were the anti ones and such predominance was slightly increased with solvent polarity. The exo-selectivity was complete in all the cases except for the anti approach to compounds 2a (in polar solvents) and 2b. The role of the sulfinyl group in this behavior was inferred by comparison of these results with those obtained in reactions of diazoalkanes with 5-methoxyfuran-2(5H)-one (3). Steric interactions seem to be the main ones responsible for the observed exo selectivity of reactions with diazoethane, but electronic factors, which can be modulated by the solvent, are also significant in the pi-facial selectivity control. DFT computational methods are able to correctly predict the reactivity, regioselectivity, and pi-facial selectivity exhibited by 5-alkoxyfuranones as well as their changes with the solvent polarity. A C-H.O hydrogen bond, involving the oxygen atom of the 5-alkoxy group at dipolarophiles and the endo-hydrogen atom at dipoles, seems to play a key role in the electronic interactions influencing the stereochemical course of these reactions.     

Use of the internal standardization for difficult sampling by graphite furnace atomic absorption spectrometry

This work shows the potentiality of As as internal standard to compensate errors from sampling of sparkling drinking water samples in the determination of selenium by graphite furnace atomic absorption spectrometry. The mixture Pd(NO₃)₂/Mg(NO₃)₂ was used as chemical modifier. All samples and reference solutions were automatically spiked with 500 μg l⁻¹ As and 0.2% (v/v) HNO₃ by the autosampler, eliminating the need for manual dilutions. For 10 μl dispensed sample into the graphite tube, a good correlation (r=0.9996) was obtained between the ratio of analyte absorbance by the internal standard absorbance and the analyte concentrations. The relative standard deviations (R.S.D.) of measurements varied from 0.05 to 2% and from 1.9 to 5% (n=12) with and without internal standardization, respectively. The limit of detection (LD) based on integrated absorbance was 3.0 μg l⁻¹ Se. Recoveries in the 94-109% range for Se spiked samples were obtained. Internal standardization (IS) improved the repeatability of measurements and increased the lifetime of the graphite tube in ca. 15%.     

Study of the Photochemical Properties and Conical Intersections of [2,2′‐Bipyridyl]‐3‐amine‐3′‐ol

The two isoelectronic bipyridyl derivatives [2,2′‐bipyridyl]‐3,3′‐diamine and [2,2′‐bipyridyl]‐3,3′‐diol are experimentally known to undergo very different excited‐state double‐proton‐transfer processes, which result in fluorescence quantum yields that differ by four orders of magnitude. In a previous study, these differences were explained from a theoretical point of view, because of topographical features in the potential energy surface and the presence of conical intersections (CIs). Here, we analyze the photochemical properties of a new molecule, [2,2′‐bipyridyl]‐3‐amine‐3′‐ol [BP(OH)(NH₂)], which is, in fact, a hybrid of the former two. Our density functional theory (DFT), time‐dependent DFT (TDDFT), and complete active space self‐consistent field (CASSCF) calculations indicate that the double‐proton‐transfer process in the ground and first singlet π→π* excited state in BP(OH)(NH₂) presents features that are between those of their “parents”. The presence of two CIs and the role they may play in the actual photochemistry of BP(OH)(NH₂) and other bipyridyl derivatives are also discussed.     

Multiplexed Determination of Amino‐Terminal Pro‐B‐Type Natriuretic Peptide and C‐Reactive Protein Cardiac Biomarkers in Human Serum at a Disposable Electrochemical Magnetoimmunosensor

A rapid magnetoimmunosensor for the simultaneous determination of two cardiac biomarkers, amino‐terminal pro‐B‐type natriuretic peptide (NT‐proBNP) and C‐reactive protein (CRP), in human serum is described. Specific capture antibodies were covalently immobilized onto carboxylic acid‐modified magnetic beads. The quantification of NT‐proBNP and CRP was performed by using indirect competitive and sandwich configurations, respectively, and horseradish peroxidase‐labeled tracers. The use of dual screen‐printed carbon electrodes allowed the achievement of simultaneous independent amperometric readout for each cardiac biomarker. The developed methodology showed very low limits of detection (0.47 ng mL^?1). An international standard for CRP serum spiked with NT‐proBNP was analyzed to evaluate the usefulness of the magnetoimmunosensor.