Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Asymmetric Synthesis of Calyculin C. 2. Synthesis of the C(26)-C(37) Fragment and Model Wittig Couplings

We report our synthesis of the C(26)-C(37) fragment of serine/threonine protein phosphatase PP1 and PP2A inhibitor calyculin C (1). Outlined in this paper are synthetic approaches to the two components based on disconnection at the C(33)-N(3) amide bond. We report the successful synthesis of the C(33)-C(37) aza-sugar derived from D-lyxose which was coupled onto a C(26)-C(32) aminooxazole originating from L-pyroglutamic acid. Elaboration of the resulting amide to a fully deprotected C(26)-C(37) fragment of calyculin C completed our synthesis. This provided an appropriate phosphonium salt for use in a Wittig olefination for joining both halves of the natural product.     

Nucleophilic additions of arylzinc compounds to aldehydes mediated by CrCl(3): efficient and facile synthesis of functionalized benzhydrols, 1(3H)-isobenzofuranones, benzyl alcohols, or diaryl ketones

In the presence of a stoichiometric amount of CrCl(3) and trimethylchlorosilane (TMSCl), nucleophilic addition of arylzinc compounds 1c-h to arylaldehydes 2a,b,g smoothly proceeded at room temperature to yield corresponding benzhydrols 4a-f in good yields. From arylzinc compounds 1a,b, 3-aryl-1(3H)-isobenzofuranones 3a-f were given by the CrCl(3)-mediated reaction with arylaldehydes 2a-f. Diaryl ketones 5a-e were obtained in good yields by the addition of excess amount of benzaldehyde as an oxidant to the resulting solution after the CrCl(3)-mediated reaction between arylzinc compounds 1c-g and arylaldehydes 2b,g was completed. In the nucleophilic additions of arylzinc compounds 1a,d,f to alkyladehydes 6b-f, the treatment of arylzinc compounds with CrCl(3) was required prior to the addition of the aldehydes in order to prevent the fast protodezincation of arylzinc compounds by the enolizable aldehydes. In these CrCl(3)-mediated nucleophilic additions of arylzinc compounds to aldehydes, arylchromium(III) species are probably reactive intermediates.     

Strategy for synthesis of the isoleucine conjugate of epi-jasmonic acid

The TES ether of 2-((1R,2S,3R)-3-hydroxy-2-((Z)-pent-2-enyl)cyclopentyl)acetic acid (5, equal to the reduction product of epi-jasmonic acid) derived from (1R,4S)-4-hydroxycyclopent-2-enyl acetate (19) in 13 steps was activated by using isobutyl chloroformate and was subjected to condensation with isoleucine at room temperature for 48 h. The product was desilylated and oxidized to the isoleucine conjugate of epi-jasmonic acid in 68% yield over three steps. Similarly, allo-isoleucine conjugate of epi-jasmonic acid and three isoleucine conjugates of ent-epi-jasmonic acid, jasmonic acid, and ent-jasmonic acid were synthesized.     

Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions

Novel layer-by-layer (LbL) assembly films composed of poly( L-lysine) (PLL) and poly( D-lactic acid) (PDLA) were prepared by the alternate immersion of a gold substrate into an aqueous PLL solution and an acetonitrile solution of PDLA. The formation of the LbL assembly film was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy observation, and attenuated total reflection Fourier transform infrared spectroscopy measurement. The driving force responsible for the LbL assembly was determined by investigating the formation behavior of the LbL assembly under various conditions. The formation of the LbL assembly was not affected either by the stereochemistry of polylysine and poly(lactic acid) or by the addition of urea, which is known to inhibit hydrogen bonding interaction between polymers, into the aqueous PLL solution. The LbL assembly was also formed by the combination of PDLA and polycations other than polylysine, such as poly(diallyldimethylammonium chloride). On the other hand, the combination of PDLA and any polyanions such as poly(styrene sulfonate sodium salt) produced little corresponding LbL assembly. The increase in positive charge on the amino nitrogen atom of PLL enhanced the LbL assembly. These results suggest that the LbL assembly film composed of PLL and PDLA was fabricated by cation-dipole interactions between the positive charge on the amino nitrogen atom of PLL and the lone pairs of the carbonyl oxygen atom of PDLA.     

Selection principle for various modes of spatially nonuniform electrochemical oscillations

The pattern selection principle for various modes of spatially nonuniform oscillation was investigated by taking a current oscillation of negative differential resistance type, appearing in H2O2 reduction on platinum (Pt) ring electrodes, as a model system. In experiments, various modes of spatiotemporal oscillation, such as a spatially uniform oscillation, standing wave oscillation, and rotating wave oscillation, appeared depending on the applied potential and the distance between the Pt-ring electrode and the reference electrode. A simple mathematical model for the spatiotemporal patterns at the electrode surface was proposed. Numerical calculations and nonlinear bifurcation analysis based on the proposed model reproduced all the essential features of the experimental results and clarified the pattern selection principle.     

Generation and detection of the radical cation and the dication derived from 4,9‐diethyl[1,4]dihydrodithiino[5,6‐f]benzotrithiole and its 5‐oxide

4,9‐Diethyl[1,4]dihydrodithiino[5,6‐f]benzotrithiole (DTBT) gave a radical cation, DTBT(•+), and a dication, DTBT(2+), on treatment with a single‐electron oxidizing reagent. Both compounds showed an ESR signal, whereas the dication, generated by this procedure, was silent for ¹H NMR. Hydrolysis of DTBT(2+) gave DTBT 1‐oxide (DTBT 1‐O) and 2‐oxide (DTBT 2‐O) together with DTBT and a mixture of several dioxides. A singlet‐state dication, DTBT(2+)‐S, which was generated upon treatment of DTBT 5‐oxide (DTBT 5‐O) with concentrated D₂SO₄, was detected by ¹H and ¹³C NMR. After 20 h, the NMR signals disappeared while the solution was active for ESR. The results suggest that (i) a species generated from DTBT by oxidation with the single‐electron oxidizing reagent is a triplet‐state dication, DTBT(2+)‐T, and (ii) DTBT(2+)‐S, initially generated, gradually isomerizes to DTBT(2+)‐T in the solution, and DTBT(2+)‐T forms a partial spin pair. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:394–401, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20445     

Deposition of thin mesoporous silica films on glass substrates from basic solution

Transparent thin (ca. 100 nm) films of silica-surfactant mesostructured materials were deposited on borosilicate glass plates and soda-lime glass tubes from aqueous solutions containing tetraethoxysilane, alkyltrimethylammonium chloride, ammonia, and methanol. By calcination in air, the films became mesoporous (BET surface area of 700-900 m2 g-1) with pore diameter 2.0-2.8 nm.     

Synthetic studies on cell surface glycans 3: Branching pentasaccharides of glycoprotein

Synthetic routes for the branching pentasaccharides 4 and 5 of glycoproteins are described in a regio- and stereo- controlled way.     

Photochemical aromatic hydroxylation by aromatic amine N-oxides: remarkable solvent effect on NIH-shift

Photooxygenations of 4-²H-anisole ($\text{3}$) and o-xylene ($\text{5}$) by 3-methylpyridazine 2-oxide ($\text{1}$) or pyridine 1-oxide ($\text{2}$) were studied in a variety of solvents at varying irradiation temperatures. Remarkable solvent effect on NIH-shift coupled with their hydroxylation processes was observed.