MR detection of mechanical vibrations using a radiofrequency field gradient

A new method for NMR characterization of mechanical waves, based upon radiofrequency field gradient for motion encoding, is proposed. A binomial B1 gradient excitation scheme was used to visualize the mobile spins undergoing a periodic transverse mechanical excitation. A simple model was designed to simulate the NMR signal as a function of the wave frequency excitation and the periodicity of the NMR pulse sequence. The preliminary results were obtained on a gel phantom at low vibration frequencies (0-200 Hz) by using a ladder-shaped coil generating a nearly constant RF field gradient along a specific known direction. For very small displacements and/or B1 gradients, the NMR signal measured on a gel phantom was proportional to the vibration amplitude and the pulse sequence was shown to be selective with respect to the vibration frequency. A good estimation of the direction of vibrations was obtained by varying the angle between the motion direction and the B1 gradient. The method and its use in parallel to more conventional MR elastography techniques are discussed. The presented approach might be of interest for noninvasive investigation of elastic properties of soft tissues and other materials.     

Description of pulse propagation in a dispersive medium by use of a pulse quality factor

We investigated how the duration of short laser pulses evolves in a dispersive material, using rms widths and a propagation law based on a pulse quality factor. Experiments were carried out with femtosecond pulses (10 to 25fs at the temporal waist) propagating in bulk fused silica. Excellent agreement was found between theory and experiment. This approach does not require complete characterization of laser pulses and eliminates the need for any assumption regarding the interpretation of autocorrelation traces. The method is of general validity, and it can be applied to pulses of arbitrary shape.     

Just noticeable differences of open quotient and asymmetry coefficient in singing voice

This study aims to explore the perceptual relevance of the variations of glottal flow parameters and to what extent a small variation can be detected. Just Noticeable Differences (JNDs) have been measured for three values of open quotient (0.4, 0.6, and 0.8) and two values of asymmetry coefficient (2/3 and 0.8), and the effect of changes of vowel, pitch, vibrato, and amplitude parameters has been tested. Two main groups of subjects have been analyzed: a group of 20 untrained subjects and a group of 10 trained subjects. The results show that the JND for open quotient is highly dependent on the target value: an increase of the JND is noticed when the open quotient target value is increased. The relative JND is constant: ΔO_q/O_q = 14% for the untrained and 10% for the trained. In the same way, the JND for asymmetry coefficient is also slightly dependent on the target value–an increase of the asymmetry coefficient value leads to a decrease of the JND. The results show that there is no effect from the selected vowel or frequency (two values have been tested), but that the addition of a vibrato has a small effect on the JND of open quotient. The choice of an amplitude parameter also has a great effect on the JND of open quotient.     

Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture

In this paper, an atmospheric pressure plasma jet sustained in pure argon and an argon/water vapour mixture has been used to modify the surface of polypropylene (PP) films. The gas temperature of the plasma jet was found to be 625 K in an active zone between the electrodes and was found to increase in the afterglow. Based on these results, the PP films are placed as close as possible to the edge of the capillary in order to avoid thermal damage to the polymer. XPS results on the untreated and modified PP samples revealed incorporation of a significant amount of oxygen on the polymer surface, however, this oxygen inclusion is more pronounced for the argon/water vapour jet due to the higher radicals density in the jet afterglow. One can therefore conclude that adding water vapour to an argon plasma jet can be a convenient way to increase the efficiency of plasma surface modification.     

Mitigating heat dissipation in Raman lasers using coherent anti-stokes Raman scattering

We present a novel technique that intrinsically mitigates the quantum-defect heating in Raman lasers. The basic principle of this so-called "coherent anti-Stokes Raman scattering (CARS)-based heat mitigation" is to suppress the phonon creation in the Raman medium by increasing the number of out-coupled anti-Stokes photons with respect to the number of out-coupled Stokes photons. We demonstrate with the aid of numerical simulations that for a hydrogen and a silicon Raman laser, CARS-based heat mitigation efficiencies of at least 30% and 35%, respectively, can be obtained.     

1H and 13C NMR Determination of the Enantiomeric Purity of Substituted 4-Amino-3- (thien-2-Yl)-Butyric Acids and 4-Amino-3-(Benzo[b]Furan-2-yl)-Butyric Acids,Ligands of the GabaB Receptor.

The enantiomeric composition and absolute configuration of 4-Amino-3-(benzo[b]furan-2-yl)-Butanoic Acids and of 4-Amino-3-(thien-2-yl)-Butanoic Acids 1 may be accurately determined by ¹H and ¹³C nuclear magnetic resonance analysis of the corresponding derivatives 3 prepared by reaction with chiral reagents. Correlation with HPLC is signaled.     

BOLD responses to trigeminal nerve stimulation

The current study investigates a new model of barrel cortex activation using stimulation of the infraorbital branch of the trigeminal nerve. A robust and reproducible activation of the rat barrel cortex was obtained following trigeminal nerve stimulation. Blood oxygen level-dependent (BOLD) effects were obtained in the primary somatosensory barrel cortex (S1BF), the secondary somatosensory cortex (S2) and the motor cortex. These cortical areas were reached from afferent pathways from the trigeminal ganglion, the trigeminal nuclei and thalamic nuclei from which neurons project their axons upon whisker stimulation. The maximum BOLD responses were obtained for a stimulus frequency of 1 Hz, a stimulus pulse width of 100 μs and for current intensities between 1.5 and 3 mA. The BOLD response was nonlinear as a function of frequency and current intensity. Additionally, modeling BOLD responses in the rat barrel cortex from separate cerebral blood flow (CBF) and cerebral metabolic rate of oxygen (CMRO₂) measurements showed good agreement with the shape and amplitude of measured BOLD responses as a function of stimulus frequency and will potentially allow to identify the sources of BOLD nonlinearities. Activation of the rat barrel cortex using trigeminal nerve stimulation will contribute to the interpretation of the BOLD signals from functional magnetic resonance imaging studies.     

Cannabinoids in oral fluid by on-site immunoassay and by GC-MS using two different oral fluid collection devices

Oral fluid (OF) enables non-invasive sample collection for on-site drug testing, but performance of on-site tests with occasional and frequent smokers’ OF to identify cannabinoid intake requires further evaluation. Furthermore, as far as we are aware, no studies have evaluated differences between cannabinoid disposition among OF collection devices with authentic OF samples after controlled cannabis administration. Fourteen frequent (≥4 times per week) and 10 occasional (less than twice a week) adult cannabis smokers smoked one 6.8 % ?⁹-tetrahydrocannabinol (THC) cigarette ad libitum over 10 min. OF was collected with the StatSure Saliva Sampler, Oral-Eze, and Draeger DrugTest 5000 test cassette before and up to 30 h after cannabis smoking. Test cassettes were analyzed within 15 min and gas chromatography–mass spectrometry cannabinoid results were obtained within 24 h. Cannabinoid concentrations with the StatSure and Oral-Eze devices were compared and times of last cannabinoid detection (t _last) and DrugTest 5000 test performance were assessed for different cannabinoid cutoffs. 11-nor-9-Carboxy-THC (THCCOOH) and cannabinol concentrations were significantly higher in Oral-Eze samples than in Stat-Sure samples. DrugTest 5000 t _last for a positive cannabinoid test were median (range) 12 h (4–24 h) and 21 h (1–?≥?30 h) for occasional and frequent smokers, respectively. Detection windows in screening and confirmatory tests were usually shorter for occasional than for frequent smokers, especially when including THCCOOH ≥20 ng L^?1 in confirmation criteria. No differences in t _last were observed between collection devices, except for THC ≥2 μg L^?1. We thus report significantly different THCCOOH and cannabinol, but not THC, concentrations between OF collection devices, which may affect OF data interpretation. The DrugTest 5000 on-site device had high diagnostic sensitivity, specificity, and efficiency for cannabinoids.     

Screening of Wood/Forest and Vine By-Products as Sources of New Drugs for Sustainable Strategies to Control Fusarium graminearum and the Production of Mycotoxins

Fusarium graminearum is a fungal pathogen that can colonize small-grain cereals and maize and secrete type B trichothecene (TCTB) mycotoxins. The development of environmental-friendly strategies guaranteeing the safety of food and feed is a key challenge facing agriculture today. One of these strategies lies on the promising capacity of products issued from natural sources to counteract crop pests. In this work, the in vitro efficiency of sixteen extracts obtained from eight natural sources using subcritical water extraction at two temperatures was assessed against fungal growth and TCTB production by F. graminearum. Maritime pine sawdust extract was shown to be extremely efficient, leading to a significant inhibition of up to 89% of the fungal growth and up to 65% reduction of the mycotoxin production by F. graminearum. Liquid chromatography/mass spectrometry analysis of this active extract revealed the presence of three families of phenolics with a predominance of methylated compounds and suggested that the abundance of methylated structures, and therefore of hydrophobic compounds, could be a primary factor underpinning the activity of the maritime pine sawdust extract. Altogether, our data support that wood/forest by-products could be promising sources of bioactive compounds for controlling F. graminearum and its production of mycotoxins.     

Nanoparticles from vesicle polymerization: Characterization and kinetic study

The polymerization of isodecyl acrylate (ISODAC) in vesicles made from an anionic surfactant—sodium di-2-ethylhexyl phosphate (SEHP)—and from water is studied by ¹H-NMR, transmission electron microscopy, and quasielastic light scattering. High polymerization rates and high conversion rates are achieved with both water-soluble initiator, K₂S₂O₈ (potassium persulfate), and oil-soluble initiator, AIBN (azoisobisbutyronitrile). ISODAC is probably located inside the vesicle bilayer(s) because of its high hydrophobicity. Particles stable at room temperature with a mean diameter of about 50 nm are obtained. Kinetic orders of ISODAC polymerization are determined and the characterization of the resulting particles during and after polymerization are studied. © 1996 John Wiley & Sons, Inc.