Comparative study of the alignment method on experimental and simulated chromatographic data

One of the major problems in the signal comparison of chromatographic data is the variability of response caused by instrumental drifts and others instabilities. Measures of quality control and evaluation of conformity are inherently sensitive to shift. It is essential to be able to compare test samples to reference samples in an evolutionary analytical environment by offsetting the inevitable drift. Therefore, prior to any multivariate analysis, the alignment of analytical signals is a compulsory preprocessing step. During recent years, many researchers have taken a greater interest in the study of the alignment. The present paper is an updated review on the alignment algorithms, methods, and improvements used in chromatography. The study is dedicated to one‐dimensional signals. Several of the exposed methods have common theoretical bases and can differ through their optimization methods. The main issue for the operator is to choose the appropriate method according to the type of signals to be processed.     

Quadrupolar Ultrafast Charge Transfer in Diaminoazobenzene-Bridged Perylenediimide Triads

Strong push-pull interactions between electron donor, diaminoazobenzene (azo), and an electron acceptor, perylenediimide (PDI), entities in the newly synthesized A−D−A type triads (A=electron acceptor and D=electron donor) and the corresponding A−D dyads are shown to reveal wide-band absorption covering the entire visible spectrum. Electrochemical studies revealed the facile reduction of PDI and relatively easier oxidation of diaminoazobenzene in the dyads and triads. Charge transfer reversal using fluorescence-spectroelectrochemistry wherein the PDI fluorescence recovery upon one-electron oxidation, deterring the charge-transfer interactions, was possible to accomplish. The charge transfer state density difference and the frontier orbitals from the DFT calculations established the electron-deficient PDI to be an electron acceptor and diaminoazobenzene to be an electron donor resulting in energetically closely positioned PDI ^δ− -Azo ^δ+ -PDI ^δ− quadrupolar charge-transfer states in the case of triads and Azo ^δ+ -PDI ^δ− dipolar charge-transfer states in the case of dyads. Subsequent femtosecond transient absorption spectral studies unequivocally proved the occurrence of excited-state charge transfer in these dyads and triads in benzonitrile wherein the calculated forward charge transfer rate constants, k_f, were limited to instrument response factor, meaning >10¹² s⁻¹ revealing the occurrence of ultrafast photo-events. The charge recombination rate constant, k_r, was found to depend on the type of donor-acceptor conjugates, that is, it was possible to establish faster k_r in the case of triads (∼10¹¹ s⁻¹) compared to dyads (∼10¹⁰ s⁻¹). Modulating both ground and excited-state properties of PDI with the help of strong quadrupolar and dipolar charge transfer and witnessing ultrafast charge transfer events in the studied triads and dyads is borne out from the present study.     

Nickel(II) meso‐Hydroxyporphyrin Complexes Revisited: Palladium‐Catalysed Synthesis,Electronic Structures of Derived Oxy Radicals,and Oxidative Coupling to a Dioxoporphodimethene Dyad

We report the synthesis and characterisation of new examples of meso‐hydroxynickel(II) porphyrins with 5,15‐diphenyl and 10‐phenyl‐5,15‐diphenyl/diaryl substitution. The OH group was introduced by using carbonate or hydroxide as nucleophile by using palladium/phosphine catalysis. The NiPor?OHs exist in solution in equilibrium with the corresponding oxy radicals NiPor?O^.. The 15‐phenyl group stabilises the radicals, so that the ¹H NMR spectra of {NiPor?OH} are extremely broad due to chemical exchange with the paramagnetic species. The radical concentration for the diphenylporphyrin analogue is only 1 %, and its NMR line‐broadening was able to be studied by variable‐temperature NMR spectroscopy. The EPR signals of NiPor?O^. are consistent with somewhat delocalised porphyrinyloxy radicals, and the spin distributions calculated by using density functional theory match the EPR and NMR spectroscopic observations. Nickel(II) meso‐hydroxy‐10,20‐diphenylporphyrin was oxidatively coupled to a dioxo‐terminated porphodimethene dyad, the strongly red‐shifted electronic spectrum of which was successfully modelled by using time‐dependent DFT calculations.     

Reversible Clustering of Gold Nanoparticles under Confinement

A limiting factor of solvent‐induced nanoparticle self‐assembly is the need for constant sample dilution in assembly/disassembly cycles. Changes in the nanoparticle concentration alter the kinetics of the subsequent assembly process, limiting optical signal recovery. Herein, we show that upon confining hydrophobic nanoparticles in permeable silica nanocapsules, the number of nanoparticles participating in cyclic aggregation remains constant despite bulk changes in solution, leading to highly reproducible plasmon band shifts at different solvent compositions.     

Development of a membrane-based vapor-phase bioreactor

A vapor-phase bioreactor has been developed utilizing porous metal membranes in a cylindrical design employing radial flow as opposed to traditional axial flow for the vapor stream. The system was evaluated for the biodegradation ofp-xylene (p-xylene) from a water-saturated air stream byPseudomonas putida ATCC 23973 immobilized onto sand. The biocatalyst was placed in the annular space between two cylindrical, porous stainless-steel membranes. Details of the reactor system are presented along with biological data verifying system performance. The feed flow rate andp-xylene concentration were varied between 60 and 130 cm³/min and 15–150 ppm, respectively. Continuous reactor operation was maintained for 80–200 h with removal efficiencies (based onp-xylene disappearance) between 80 and 95%. The effluent concentration histories were compared to determine the operating range of the bioreactor.     

Synthesis optimization of organic xerogels produced from convective air-drying of resorcinol-formaldehyde gels

Resorcinol-formaldehyde gels were produced at 50, 70 and 90 °C and with three different R/C ratios (500, 1000 and 2000). The effect of these variables combined with that of aging time was studied in order to optimize the synthesis conditions. The convective air-drying process was used, and the drying duration was studied with regard to the synthesis conditions. The aging time has no effect on the pore texture after 24 h at 90 °C or 48 h at 70 °C, whatever the R/C value. The synthesis-aging step can be shortened by increasing the temperature. Nevertheless, the pore size tends then to decrease, especially when R/C is high, but this can be counterbalanced by increasing R/C. Moreover, bubbles often appear in the gel at high synthesis temperature, which limits the temperature to about 70 °C in the case of monolithic parts. At 70 °C and with an air velocity of 2 m/s, the elimination of 90% of the solvent requires 1 h drying when the pore size reaches 400-600 nm, 2.5 h for 50 nm wide pores and 3 h when the pore size decreases to 15-20 nm. The drying duration does not exceed 8 h in all cases and could be shortened by increasing the temperature at the end of the process.     

Cation-anion interactions in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate-based ionic liquid electrolytes

An important step in developing ionic-liquid-based electrolytes for lithium rechargeable batteries is obtaining a molecular-level understanding of the ionic interactions that occur in these systems. In this study, 1-ethyl-3-methylimidazolium trifluoromethansulfonate ([C2mim]CF3SO3) is complexed with LiCF3SO3, and the local structures of the CF3SO3- and [C2mim]+ ions are investigated with infrared and Raman spectroscopy. The isolation and subsequent refinement of a Li[C2mim](CF3SO3)2 crystal provides further insight into the structure of the [C2mim]CF3SO3-LiCF3SO3 solutions. Minor changes are observed in the infrared and Raman spectra of dilute [C2mim]CF3SO3-LiCF3SO3 solutions compared to pure [C2mim]CF3SO3. However, a suspension of very small Li[C2mim](CF3SO3)2 crystallites forms at a solution composition of [C2mim]CF3SO3:LiCF3SO3 = 10:1 (mole ratio), placing an upper limit on the solubility of LiCF3SO3. Essentially no changes are observed in the vibrational modes of the [C2mim]+ cations over the entire range of LiCF3SO3 compositions studied, suggesting that the addition of these compounds does not significantly perturb the local structure of the [C2mim]+ cations. The salt used in this study has a common anion with the ionic liquid; thus, the ion cloud surrounding the [C2mim]+ ions, which must be primarily composed of CF3SO3- anions, is not significantly altered with the addition of LiCF3SO3.     

Alcohol uncaging with fluorescence reporting: evaluation of o-acetoxyphenyl methyloxazolone precursors

This paper evaluates a series of photolabile protecting groups with built-in fluorescence reporting. They rely on readily available o-acetoxyphenyl methyloxazolones as activated precursors. Alcohol substrates are easily caged. The resulting photoactivable esters exhibit large one- and two-photon uncaging cross sections. The alcohol substrates are quantitatively released in a 1:1 molar ratio with a strongly fluorescent coumarin coproduct that serves as a reporter to quantify substrate delivery.