Development and validation of an analytical method for detection of estrogens in water

An analytical procedure enabling routine analysis of four environmental estrogens at concentrations below 1 ng L^–1 in estuarine water samples has been developed and validated. The method includes extraction of water samples using solid-phase extraction discs and detection by gas chromatography (GC) with tandem mass spectrometry (MS–MS) in electron-impact (EI) mode. The targeted estrogens included 17- and 17-estradiol (aE2, bE2), estrone (E1), and 17-ethinylestradiol (EE2), all known environmental endocrine disruptors. Method performance characteristics, for example trueness, recovery, calibration, precision, accuracy, limit of quantification (LOQ), and the stability of the compounds are presented for each of the selected estrogens. Application of the procedure to water samples from the Scheldt estuary (Belgium – The Netherlands), a polluted estuary with reported incidences of environmental endocrine disruption, revealed that E1 was detected most frequently at concentrations up to 7 ng L^–1. aE2 was detected once only and concentrations of bE2 and EE2 were below the LOQ.Presented at the 9th FECS Conference on Chemistry and the Environment, Bordeaux, France, 29 August–1 September 2004     

A New Method to Prepare Transition Metal Salts of Bulk and Supported Heteropolyacids. Application to the Catalysis of the Oxidative Dehydrogenation of Isobutyric Acid

Transition metal salts of heteropolyacids have been prepared taking into account the strong acidic and cation exchanging properties of the solid heteropolyacids. The exchange between protons and the transition metal cation is carried out by stirring a suspension of the hydrated heteropolyacid in a solution of the metal acetylacetonate complex in toluene. The exchange occurs on the surface of the solid particles and diffusion of protons and metal cations into the hydrated lattice leads to the substitution of all the protons. The method can be utilized in order to prepare supported vanadyl and copper molybdophosphates from supported heteropolyacids and they have been studied in the catalysis of the oxidative dehydrogenation of isobutyric acid. The effect of vanadyl counter-ions on the catalytic behavior is the same as observed with bulk catalysts but, on the contrary, copper supported molybdophosphate shows an acid catalytic activity not observed with bulk catalysts.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

Self-Assembly of Gold Nanoclusters on Molecularly Modified GaAs

The elaboration of closed-packed monolayers of Au₅₅(PPh₃)₁₂Cl₆ clusters on oxidized and non-oxidized GaAs surfaces is reported. The first part of this work describes the use of silanethiol modified GaAs oxide surfaces to trap 18 nm gold colloids and Au₅₅(PPh₃)₁₂Cl₆ clusters. The surfaces characterized by AFM measurements present high-quality coverage on a quite long range for both metallic species. The second part is devoted to the elaboration of Au₅₅(PPh₃)₁₂Cl₆ cluster monolayers on non-oxidized p-type GaAs substrates, functionalized with dithiol molecules. AFM measurements demonstrate the presence of closed-packed two-dimensional arrangements of Au₅₅ clusters.     

Shape-tunable polymer nodules grown from liposomes via ring-opening metathesis polymerization

A new inisurf (acting as surfactant and initiator) molecule for ring-opening metathesis polymerization (ROMP) was synthesized and used in aqueous solution in order to control the size and shape of polymer nodules grown from liposomes. Nodules were observed to grow in size with conversion of monomer, and depending on the monomer used, they adopted either a spherical or comet-like shape. Here, we investigate polymer production from a liposome surface. We use a hydrophobic derivative of the Grubbs catalyst positioned at the liposome surface to allow for ROMP of monomers dissolved in the aqueous outer phase. We obtain nodules of polymer that can grow up to tens of micrometers, unveiling new efficient possibilities of polymerization from a membrane in an aqueous solution.     

Importance of REP values when comparing the CALUX bioassay results with chemoanalyses results Example with spiked vegetable oils

Differences between chemical activated luciferase gene expression (CALUX) bioassay and chemoanalyses results are observed.This paper shows that calculations of the TEQ values using REP values instead of WHO TEF values give different results. The REP values do affect the results obtained by the CALUX technique. These differences are more marked for the dioxin like PCB compounds (CALUX TEQ values are lower than WHO TEQ values) than for the dioxin compounds (CALUX TEQ values are higher than WHO TEQ values).The CALUX results were compared with the concentrations of the congeners’ spiked into the oil.     

Electroactive ligands: the first metal complexes of tetrathiafulvenyl-acetylacetonate

The reaction of tris(alkylthio)tetrathiafulvalene thiolates with 3-chloro-2,4-pentanedione affords tetrathiafulvalene (TTF) moieties substituted by the acetylacetone function (TTFSacacH), precursors of novel redox-active ligands: the acetylacetonate ions (TTFSacac). These TTFSacacHs have been characterized by X-ray diffraction analyses, and similar trends have been observed, such as a TTF core almost planar and the acetylacetone substituent located in a plane almost perpendicular to the plane formed by the TTF core. Their chelating ability has been demonstrated by the formation of the corresponding M(TTFSacac)2(pyridine)2 complexes in the presence of M(II)(OAc)2.H2O (M = Ni2+, Zn2+). These complexes with TTFSacac moieties, Ni(TTFSacac)2(pyridine)2, 6b, and Zn(TTFSacac)2(pyridine)2, 7b, have been characterized by X-ray diffraction analyses, showing in all structures the metal(II) center chelated by two TTFacac units in the equatorial plane and the octahedral coordination geometry around the metal completed by two axial pyridine ligands. Cyclic voltammetry and UV-visible-near infrared spectroscopic measurements have evidenced a sizable interaction between the two electroactive ligands and the stabilization of a mixed-valence state in the one-electron oxidized complexes.     

Synthesis of (-)-Vulcanolide by enantioselective protonation

Two efficient enantioselective syntheses of the more active (S,S)-enantiomer of the powerful musk odorant Vulcanolide are described. In both syntheses, the key step is an enantioselective protonation of a ketone enolate. A third enantioselective protonation, of a thiol ester enolate, was applied for the determination of the absolute configuration of Vulcanolide by comparison with a known compound.     

Synthesis and conformational analysis by 1H NMR and restrained molecular dynamics simulations of the cyclic decapeptide [Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly]

Summary The design of enzyme mimics with therapeutic and industrial applications has interested both experimental and computational chemists for several decades. Recent advances in the computational methodology of restrained molecular dynamics, used in conjunction with data obtained from two-dimensional ¹H NMR spectroscopy, make it a promising method to study peptide and protein structure and function. Several issues, however, need to be addressed in order to assess the validity of this method for its explanatory and predictive value. Among the issues addressed in this study are: the accuracy and generizability of the GROMOS peptide molecular mechanics force field; the effect of inclusion of solvent on the simulations; and the effect of different types of restraining algorithms on the computational results. The decapeptide Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly, which corresponds to the sequence of ACTH_1–10, has been synthesized, cyclized, and studied by two-dimensional ¹H NMR spectroscopy. Restrained molecular dynamics (RMD) and time-averaged restrained molecular dynamics (TARMD) simulations were carried out on four different distance-geometry starting structures in order to determine and contrast the behavior of cyclic ACTH_1–10 in vacuum and in solution. For the RMD simulations, the structures did not fit the NOE data well, even at high values of the restraining potential. The TARMD simulation method, however, was able to give structures that fit the NOE data at high values of the restraining potential. In both cases, inclusion of explicit solvent molecules in the simulation had little effect on the quality of the fit, although it was found to dampen the motion of the cyclic peptide. For both simulation techniques, the number and size of the NOE violations increased as the restraining potential approached zero. This is due, presumably, to inadequacies in the force field. Additional TARMD vacuum-phase simulations, run with a larger memory length or with a larger sampling size (16 additional distance-geometry structures), yielded no significantly different results. The computed data were then analyzed to help explain the sparse NOE data and poor chymotryptic activity of the cyclic peptide. Cyclic ACTH_1–10, which contains the functional moieties of the catalytic triad of chymotrypsin, was evaluated as a potential mimic of chymotrypsin by measurement of the rate of hydrolysis of esters of L-and d-phenylalanine. The poor rate of hydrolysis is attributed to the flexibility of the decapeptide, the motion of the side chains, which result in the absence of long-range NOEs, the small size of the macrocycle relative to that of the substrate, and the inappropriate orientation of the Gly, His, and Ser residues. The results demonstrate the utility of this method in computer-aided molecular design of cyclic peptides and suggest structural modifications for future work based on a larger and more rigid peptide framework.     

Binding affinities of commonly employed sensitizers of viral inactivation

Methylene blue (MB), riboflavin (RB) and psoralen sensitizers (4' aminomethyl-4,5',8-trimethylpsoralen [AMT] and derivatives) are under study as sensitizers of viral inactivation of blood products such as plasma proteins, platelets and red cells, all of which lack genomic nucleic acid. To predict where these sensitizers accumulate in viruses and in cells, their relative affinities for calf thymus DNA, neutral and negatively charged phospholipids and albumin were determined by dialysis. MB has a strong affinity for nucleic acid and negatively charged phospholipid, but little affinity for albumin or neutral phospholipid. RB has modest affinity for nucleic acid and little affinity for albumin or either phospholipid. AMT has substantial affinity for nucleic acid, neutral and negatively charged phospholipids and albumin. Neither AMT nor RB binds to poly G, although MB has some affinity for this polymer. Evidence of association of RB with guanosine monophosphate, adenosine monophosphate and tryptophan methylester hydrochloride in PBS buffer in the presence and absence of formamide was obtained from nonlinear Stern-Volmer plots and shifts in the ground state absorption spectrum of RB.