Measurement of dispersion numbers for 36 and 100% tri-isoamyl phosphate solvents equilibrated with aqueous nitric acid solutions

The cross sections for the ¹¹⁸Sn (n, α)¹¹⁵Cd, ¹²⁰Sn (n, α)^117gCd and ¹²⁰Sn (n, α)^117mCd reactions have been measured in the neutron energy range of 13.5–14.6 MeV using the activation technique and a coaxial HPGe γ-ray detector. The fast neutrons were produced by the T (d, n) ⁴He reaction. The neutron energies in the measurements were determined by cross section ratios for ⁹³Nb(n,2n)^92mNb and ⁹⁰Zr(n, 2n)^89m+gZr reactions. The results of present work were discussed and compared with theoretical calculation data, measurement results found in the literature and with the comprehensive evaluation data in ENDF/B-VII.0, CENDL-3.1, JENDL-4.0 libraries.     

Direct dissolution of intact UO<Subscript>2</Subscript> pellet and in situ extraction by organic solutions of TBP-HNO<Subscript>3</Subscript> at atmospheric pressure: role of solvate composition

Recently authors demonstrated direct dissolution of g-level PHWR UO₂ fuel pellet fragments and in situ extraction by TBP-HNO₃ and TiAP-HNO₃ solutions at atmospheric pressures. Extending the work, similar studies were performed on intact unirradiated PHWR UO₂ fuel pellets (~15 g U) with varying compositions of organic solvate of tri-n-butyl phosphate (TBP). It was observed that extent of dissolution was a strong function of organic solution composition TBP·(HNO₃) _x (H₂O) _y . Complete dissolution of intact UO₂ pellet in a reasonable time was observed only in case of a particular solvate composition.     

Thermal stability of UNEX/HCCD-PEG diluent FS-13

Phenyl trifluoromethyl sulfone (FS-13) is an inert diluent used in HCCD/PEG process for isolation and recovery of cesium and strontium from highly radioactive raffinate waste. There is no experimental data available in open literature describing pressurization due to the thermal decomposition of FS-13 at elevated temperatures. Experiments were conducted for determination of flash point and heating of FS-13 under pressurized closed-vent conditions in an adiabatic calorimeter. During adiabatic experiments, negligible pressurization was observed.     

Visual observation of avidin-biotin affinity by fluorescent G4.5 poly(amidoamine) dendrimer

An air-treated G4.5 poly(amidoamine) (PAMAM) dendrimer displayed the enhanced fluorescence enough to be utilized as a fluorescence marker to visualize avidin-biotin affinity: On a fluorescence microscopic image, the avidin labeled by a fluorescent G4.5 PAMAM dendrimer was observed to be selectively bound on the biotin pattern that was prepared by amide-bonding of biotin on a carboxylic acid-terminated self-assembled monolayer and in turn by UV-irradiation with a photomask on the monolayer.     

Effect of terminal N-substitution in 2-oxo-1,2-dihydroquinoline-3-carbaldehyde thiosemicarbazones on the mode of coordination, structure, interaction with protein, radical scavenging and cytotoxic activity of copper(II) complexes

Four 2-oxo-1,2-dihydroquinoline-3-carbaldehyde N-substituted thiosemicarbazone ligands (H(2)-OQtsc-R, where R = H, Me, Et or Ph) and their corresponding new copper(II) complexes [CuCl(2)(H(2)-OQtsc-H)]·2H(2)O (1), [CuCl(2)(H(2)-OQtsc-Me)]·2H(2)O (2), [CuCl(2)(H(2)-OQtsc-Et)(CH(3)OH)]Cl (3) and [CuCl(H-OQtsc-Ph)]·CH(3)OH (4) have been synthesized in order to correlate the effect of terminal N-substitution on coordination behaviour, structure and biological activity. Single crystal X-ray diffraction studies revealed that the complexes 1, 2 and 3 have square pyramidal geometry around the central metal ion. In the complexes 1 and 2, the copper ion is coordinated by the ligand with ONS donor atoms, one chloride ion in apical position and the other chloride in the basal plane. Complex 3 consists of [CuCl(2)(H(2)-OQtsc-Et)(CH(3)OH)](+) cation and a chloride as counter ion. The copper ion is coordinated by the ligand with ONS donor atoms and by one chloride ion in the basal plane. One methanol molecule is bonded through its neutral oxygen in the apical position. Complex 4 is square planar with the ligand coordinating through uni-negative tridentate ONS(-) and by one chloride ion in the basal plane. The binding of complexes with lysozyme protein was carried out by fluorescence spectroscopy. Investigations of antioxidation properties showed that all the copper(II) complexes have strong radical scavenging properties. The cytotoxicity of the complexes 3 and 4 against NIH 3T3 and HeLa cell lines showed that synergy between the metal and ligands results in a significant enhancement in the cell death with IC(50) of ~10-40 μM. A size dependence of substitution at terminal N in the thiosemicarbazones on the biological activities of the complexes has been observed.     

Green synthesis of biogenic metal nanoparticles by terrestrial and aquatic phototrophic and heterotrophic eukaryotes and biocompatible agents

The size, shape and controlled dispersity of nanoparticles play a vital role in determining the physical, chemical, optical and electronic properties attributing its applications in environmental, biotechnological and biomedical fields. Various physical and chemical processes have been exploited in the synthesis of several inorganic metal nanoparticles by wet and dry approaches viz., ultraviolet irradiation, aerosol technologies, lithography, laser ablation, ultrasonic fields, and photochemical reduction techniques. However, these methodologies remain expensive and involve the use of hazardous chemicals. Therefore, there is a growing concern for the development of alternative environment friendly and sustainable methods. Increasing awareness towards green chemistry and biological processes has led to a necessity to develop simple, cost-effective and eco-friendly procedures. Phototrophic eukaryotes such as plants, algae, and diatoms and heterotrophic human cell lines and some biocompatible agents have been reported to synthesize greener nanoparticles like cobalt, copper, silver, gold, bimetallic alloys, silica, palladium, platinum, iridium, magnetite and quantum dots. Owing to the diversity and sustainability, the use of phototrophic and heterotrophic eukaryotes and biocompatible agents for the synthesis of nanomaterials is yet to be fully explored. This review describes the recent advancements in the green synthesis and applications of metal nanoparticles by plants, aquatic autotrophs, human cell lines, biocompatible agents and biomolecules.     

Interfacial regions governing internal cavities of dendrimers. Studies of poly(alkyl aryl ether) dendrimers constituted with linkers of varying alkyl chain length

This report deals with a study of the properties of internal cavities of dendritic macromolecules that are capable of encapsulating and mediating photoreactions of guest molecules. The internal cavity structures of dendrimers are determined by the interfacial regions between the aqueous exterior and hydrocarbon like interior constituted by the linkers that connect symmetrically sited branch points constituting the dendrimer and head groups that cap the dendrimers. Phloroglucinol-based poly(alkyl aryl ether) dendrimers constituted with a homologous series of alkyl linkers were undertaken for the current study. Twelve dendrimers within first, second, and third generations, having ethyl, n-propyl, n-butyl, and n-pentyl groups as the linkers and hydroxyl groups at peripheries in each generation, were synthesized. Encapsulation of pyrene and coumarins by aqueous basic solutions of dendrimers were monitored by UV-vis and fluorescence spectroscopies, which showed that a lower generation dendrimer with an optimal alkyl linker presented better encapsulation abilities than a higher generation dendrimer. Norrish type I photoreaction of dibenzyl ketone was carried out within the above series of dendrimers to probe their abilities to hold guests and reactive intermediate radical pairs within themselves. The extent of cage effect from the series of third generation dendrimers was observed to be higher with dendrimers having an n-pentyl group as the linker.     

Activated T lymphocytes migrate toward the cathode of DC electric fields in microfluidic devices

Immune cell migration is a fundamental process that enables immunosurveillance and immune responses. Understanding the mechanism of immune cell migration is not only of importance to the biology of cells, but also has high relevance to cell trafficking mediated physiological processes and diseases such as embryogenesis, wound healing, autoimmune diseases and cancers. In addition to the well-known chemical concentration gradient based guiding mechanism (i.e. chemotaxis), recent studies have shown that lymphocytes can respond to applied physiologically relevant direct current (DC) electric fields by migrating toward the cathode of the fields (i.e. electrotaxis) in both in vitro and in vivo settings. In the present study, we employed two microfluidic devices allowing controlled application of electric fields inside the microfluidic channel for quantitative studies of lymphocyte electrotaxis in vitro at the single cell level. The first device is fabricated by soft-lithography and the second device is made in glass with integrated on-chip electrodes. Using both devices, we for the first time showed that anti-CD3/CD28 antibodies activated human blood T cells migrate to the cathode of the applied DC electric field. This finding is consistent with previous electrotaxis studies on other lymphocyte subsets suggesting electrotaxis is a novel guiding mechanism for immune cell migration. Furthermore, the characteristics of electrotaxis and chemotaxis of activated T cells in PDMS microfluidic devices are compared.     

Simulation of beam plastic forming with variable bending moments

A versatile generic elastic/plastic moment/curvature equation is used to simulate beam deflections. Solutions are obtained numerically and used to investigate whether forming equations based on the assumption of pure bending can be extended in a rational way to more complicated loadings. It is concluded that the answer is affirmative, with only knowledge of the elastic/plastic behavior associated with pure bending and the elastic behavior associated with the actual loading being needed to make the extension.