Photochemistry of Macromolecular Dyes in Aqueous Solutions

Thiazine and phenazine dyes are known to exhibit photoredox behavior in the excited states of these molecules. These dyes are covalently attached to macromolecules, and the photochemistry has been investigated in homogeneous solution and as thin films coated onto electrodes. Flash photolysis of the macromolecular thionine in the presence of quenchers shows reduction of the dye and the subsequent disproportionation of the reduced dye. In the case of macromolecular thionine, evidence for the formation of a complex between ferrous ion and thionine is observed in the flash photolysis experiments. Photoelectrochemical studies show a new type of behavior for the macromolecular dye films coated onto electrodes. Macromolecular thionine film coated onto platinum electrode makes the electrode a cathode on illumination of the electrode. Macromolecular phenosafranine dye films coated onto electrodes change the polarity of the illuminated electrode depending upon the nature of the macromolecule.     

Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

Synthesis of New Benzoxazaphosphinine/Benzoxazaphosphole/Diazaphosphaphenalene‐2‐sulfides using Lawesson's Reagent

Synthesis of new benzoxazaphosphinine/benzoxazaphosphole/diazaphosphaphenalene 2‐sulfides were accomplished by the reaction of Lawesson's reagent (LR) with 4‐bromo‐2‐[(phenylamino) methyl]phenol (1a), 4‐bromo‐2‐[(4‐chloro/bromo/methoxy/methylphenyl‐amino)methyl]phenol (1b–e), 4‐bromo‐2‐[(benzylamino)methyl]phenol (1f), 2‐amino‐4‐chlorophenol (2a)/2‐amino‐4‐methylphenol (2b), 1,8‐diaminonaphthalene (3) respectively in anhydrous toluene. Products 4a–f, 5a–b and 6 were characterized by IR, ¹H, ¹³C, ³¹P NMR and Mass spectra.     

Sequential 1,3-Dipolar Cycloadditions in the Synthesis of Novel Tri-spiro Cyclohexanones and Piperidin-4-ones

The sequential 1,3-dipolar cycloadditions of azomethine ylide and nitrile oxide to a series of 2,6-bis[(E)-arylmethylidene]cyclohexanones and 1-methyl-3,5-bis[(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones afforded novel tri-spiro heterocycles comprising isoxazoline, pyrrolidine and acenaphthylen-1(2H)-one rings in good yields and stereoselectivity.     

A Facile One‐Pot Synthesis of Pyrrolo[1, 2‐a] Indoles by Intramolecular 1,3‐Dipolar Cycloaddition under Neat‐Microwave Irradiation

A straightforward and general approach for the stereoselective synthesis of fused pyrrolo[1,2‐a] indoles frameworks from>intramolecular 1,3‐dipolar cycloaddition using N‐alkylated Baylis–Hillman derivatives is presented. It was found that the cycloaddition proceeded efficiently under microwave irradiation in solvent‐free condition to afford highly stereoselective cycloadducts in good yield.     

Bromamine-B/PdCl2 is an Efficient System for the Synthesis of Anthranilic Acids from Indoles and Indigos

A convenient method has been developed for the conversion of indoles and indigos into anthranilic acids in good to excellent yields using a bromamine-B/PdCl₂ system. The general process utilizes our efficient method for the oxidation of indoles and indigos in alkaline (pH 12) acetonitrile/water (1:1) at 60 °C.     

Synthesis and Characterization of Metabolites and Potential Impurities of the Antiulcerative Drug Tenatoprazole

Tenatoprazole (Ulsacare^®) is a recently developed antiulcerative drug used for the treatment of both erosive and nonerosive gastroesophageal reflux disease. During the bulk synthesis of tenatoprazole, we have observed four impurities (tenatoprazole N‐oxide, tenatoprazole sulfone N‐oxide, N‐methyl tenatoprazole, and desmethoxy tenatoprazole) and two metabolites (tenatoprazole sulfide and tenatoprazole sulfone). The present work describes the synthesis and characterization of these impurities.     

Synthesis and Antimicrobial Activity of 1‐[(Substituted Carbamoyl)Amino]‐1H,3H‐1λ5‐[1,3,2]oxazaphospholo[3,4‐a]benzimidazol‐1‐ones

1‐[(Substituted carbamoyl)amino]‐1H,3H‐1λ⁵‐[1,3,2]oxazaphospholo[3,4‐a]benzimidazol‐1‐ones were synthesized by reacting benzimidazole 2‐methanol (4) with different chlorides of carbamidophosphoric acids (3) in the presence of triethylamine at 40–45°C. Their ¹H, ¹³C, and ³¹P NMR spectral data were discussed. The title compounds were tested for their activity against the fungi Aspergillus niger and Fusarium solani and bacteria Staphylococcus aureus and Escherichia coli. These compounds showed moderate antibacterial activity when compared with antifungal activity.     

Direct spectrophotometric determination of ruthenium in aqueous streams of nuclear reprocessing

A fiber optic aided spectrophotometric technique has been developed for determination of ruthenium in nitric acid medium. The developed method is simple, accurate and applicable to aqueous streams of nuclear reprocessing. The system obeys Lambert–Beer’s law at 468 nm in the concentration range of 30–360 μg/mL of ruthenium. The molar absorption coefficient, detection limit and Sandell’s sensitivity are 68.477 L Mol^?1 cm^?1, 31 μg/mL and 0.0124 μg/cm² respectively. Relative standard deviation was less than 2 % and correlation coefficient was 0.9998. The results obtained by the developed procedure are in good agreement with those obtained by the standard ICP-OES method. Fission products like zirconium and strontium are not interfering. Uranium is interfering and needs prior separation by solvent extraction method. The developed method is adaptable for remote operation and on-line monitoring.     

Separation and recovery of ruthenium: a review

The chemistry of the noble metal fission product, ruthenium is very complex due to the existence of many oxidation states in addition to forming a large number of co-ordination complexes. In the PUREX process for the separation of U and Pu from the spent nuclear fuels from fast breeder reactors, owing to the high volatile nature of RuO₄ problems arise not only during the extraction stages but also in the treatment of high active liquid waste and subsequent vitrification. As this volatile RuO₄ can deposit in cooler parts, there is an increase in the radiation field due to the presence of ¹⁰⁶Ru. The problem is very acute in the reprocessing of fast reactor fuels due to the increased concentration of ruthenium in the spent fuel. In nitric acid medium Ru can exist in various nitroso nitrate complexes and nitroso complexes are more stable than nitrates. The nitrates are non-extractable by the solvent TBP; however, they are extractable to a higher degree by DBP (the primary degradation product of TBP). The extractability of Ru nitrates into the solvent is inhibited by high acid content, temperature and prolonged hold-up time. Nevertheless, these factors promote the volatilization of Ru as RuO₄. The volatilization is enhanced by the addition of phosphate ions, but is suppressed by phosphite or hypophosphite ions. Thus, it would be advantageous if ruthenium is removed so that not only the purity of the product (Pu) is improved, but also the problem related to volatilisation can be resolved. High molecular weight amines (tertiary amines) capable of forming co-ordinate bonds are reported to be ideal extractants for Ru. Gas phase separation is an effective method for the recovery of Ru from catalysts, lead button and from other platinum group metals. Separation and pre-concentration of noble metals can be accomplished from non-metals by simple sorbents like coconut shell activated carbon to complicated chelating resins, aromatic polymers and zeolites. In the electro-oxidation of active Ru from nitroso salts, Pd was found to interfere and removal of Pd prior to oxidation of Ru is recommended. Redox catalysts such as Ag²⁺ and Ce⁴⁺ are found to play a prominent role in the electro-oxidation of Ru. Though, various methods and extractants are reported in the literature for the separation of Ru, R&D is being pursued for the removal of Ru during aqueous reprocessing of spent fuels using extractants and methods which are conducive to plant conditions. Hence, an exhaustive survey of literature was made and the different methods reported for the removal of Ru with emphasis towards reprocessing applications are discussed in this report as a review. Attempts made by the authors in separating Ru from simulated waste solution are also included in this review.