Measurement of dispersion numbers for 36 and 100% tri-isoamyl phosphate solvents equilibrated with aqueous nitric acid solutions

The cross sections for the ¹¹⁸Sn (n, α)¹¹⁵Cd, ¹²⁰Sn (n, α)^117gCd and ¹²⁰Sn (n, α)^117mCd reactions have been measured in the neutron energy range of 13.5–14.6 MeV using the activation technique and a coaxial HPGe γ-ray detector. The fast neutrons were produced by the T (d, n) ⁴He reaction. The neutron energies in the measurements were determined by cross section ratios for ⁹³Nb(n,2n)^92mNb and ⁹⁰Zr(n, 2n)^89m+gZr reactions. The results of present work were discussed and compared with theoretical calculation data, measurement results found in the literature and with the comprehensive evaluation data in ENDF/B-VII.0, CENDL-3.1, JENDL-4.0 libraries.     

PVT properties of PUREX/UREX solvent tri-n-butyl phosphate

Tri-n-butyl phosphate (TBP) is the workhorse of solvent extraction operations in nuclear fuel cycle as well as an important industrial chemical. Its PVT properties are not available in literature. In this study, PVT properties of TBP, estimated using group contribution method, are reported. Wagner constants were also reported in the range of 273.15?K to critical temperature.     

Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte

A low-cost polyester cellulose paper has been used as a substrate for a flexible supercapacitor device that contains aqueous carbon nanotube ink as the electrodes and a polyvinyl alcohol (PVA)-based gel as the electrolyte. Gel electrolytes have attracted much interest due to their solvent-holding capacity and good film-forming capability. The electrodes are characterized for their conductivity and morphology. Because of its high conductivity, the conductive paper is studied in supercapacitor applications as active electrodes and as separators after coating with polyvinylidene fluoride. Carbon nanotubes deposited on porous paper are more accessible to ions in the electrolyte than those on flat substrates, which results in higher power density. A simple fabrication process is achieved and paper supercapacitors are tested for their performance in both aqueous and PVA gel electrolytes by using galvanostatic and cyclic voltammetry methods. A high specific capacitance of 270 F g⁻¹ and an energy density value of 37 W h kg⁻¹ are achieved for devices with PVA gel electrolytes. Furthermore, this device can maintain excellent specific capacitance even under high currents. This is also confirmed by another counter experiment with aqueous sulfuric acid as the electrolyte. The cycle life, one of the most critical parameters in supercapacitor operations, is found to be excellent (6000 cycles) and less than 0.5 % capacitance loss is observed. Moreover, the supercapacitor device is flexible and even after twisting does not show any cracks or evidence of breakage, and shows almost the same specific capacitance of 267 F g⁻¹and energy density of 37 W h kg⁻¹. This work suggests that a paper substrate can be a highly scalable and low-cost solution for high-performance supercapacitors.     

Role of radical ions in the thermally stimulated luminescence of uranium doped BaCO3 system

Electron paramagnetic resonance (EPR) studies of -irradiated uranium doped BaCO₃ have shown the formation of CO₃ ^–, CO₂ ^–, O₃ ^– and O₂ ^– ions. Thermally stimulated luminescence (TSL) glow curves of the -irradiated samples in the 300–600 K range have exhibited an intense peak around 360 K and a weak one around 440 K. The trap parameters for these peaks have been determined from TSL data. Spectral studies of the glow have revealed emission around 566, 583 and 590 nm characteristic of the uranate ion. From studies on the thermal stabilities of the radical ions, it has been inferred that the glow peak around 360 K is associated with the thermal destruction of O₂ ^– ion and the peak around 440 K is associated with the thermal destruction of CO₃ ^– ion.     

Rhodium‐Catalyzed Oxidative Benzannulation of N‐Pivaloylanilines with Internal Alkynes through Dual C−H Bond Activation: Synthesis of Highly Substituted Naphthalenes

An efficient method was developed for the synthesis of highly substituted naphthalenes through rhodium‐catalyzed oxidative benzannulation of N‐pivaloylanilines with internal alkynes. The benzannulation reaction proceeded smoothly through dual C?H bond activation to produce the corresponding highly substituted naphthalene products in satisfactory to good yields.     

A simple TiCl4 promoted arylation of orthoformate and benzyl ethers by N,N-dialkylarylamines

N,N-Dialkylarylamines react with trimethyl orthoformate and TiCl₄ under ambient conditions to give the corresponding formyl derivatives in 75-89% yields, whereas the corresponding arylated products are obtained from benzyl ethers and acetals in 42-78% yields.     

Separation of uranium from solid (U,Pu, Ag) oxide analytical waste: effect of batch size and nitric acid molarity

This work presents the investigation of some commercially available and commonly used Si₃N₄ foils prepared with LPCVD technique. The density and the stoichiometry of these films were determined by Rutherford backscattering spectroscopy and profilometry, while the study of impurities was achieved with particle induced X-ray emission method. It was found that the density of the studied Si₃N₄ films is significantly less (~2.71 g cm^?3), while the stoichiometry is close to the values of the bulk material. The results were verified by measuring the ion energy loss through the films by scanning transmission ion microscopy.     

Synthesis of conformationally constrained lysine analogues

The synthesis of two conformationally constrained lysine analogues is reported. The synthesis of the novel analogue 1 based on the 3-aza-bicyclo[3.1.0]hexane system is accomplished from the known tricycle 3 in eight steps. The synthesis of the analogue 2 is accomplished in eight steps from 4-hydroxy proline. Both analogues are synthesized appropriately protected for Fmoc/Boc solid-phase peptide synthesis.