[6,6]‐Open and [6,6]‐Closed Isomers of C70(CF2): Synthesis,Electrochemical and Quantum Chemical Investigation

Novel difluoromethylenated [70]fullerene derivatives, C₇₀(CF₂)_n (n=1–3), were obtained by the reaction of C₇₀ with sodium difluorochloroacetate. Two major products, isomeric C₇₀(CF₂) mono‐adducts with [6,6]‐open and [6,6]‐closed configurations, were isolated and their homofullerene and methanofullerene structures were reliably determined by a variety of methods that included X‐ray analysis and high‐level spectroscopic techniques. The [6,6]‐open isomer of C₇₀(CF₂) constitutes the first homofullerene example of a non‐hetero [70]fullerene derivative in which functionalisation involves the most reactive bond in the polar region of the cage. Voltammetric estimation of the electron affinity of the C₇₀(CF₂) isomers showed that it is substantially higher for the [6,6]‐open isomer (the 70‐electron π‐conjugated system is retained) than the [6,6]‐closed form, the latter being similar to the electron affinity of pristine C₇₀. In situ ESR spectroelectrochemical investigation of the C₇₀(CF₂) radical anions and DFT calculations of the hyperfine coupling constants provide evidence for the first example of an inter‐conversion between the [6,6]‐closed and [6,6]‐open forms of a cage‐modified fullerene driven by an electrochemical one‐electron transfer. Thus, [6,6]‐closed C₇₀(CF₂) constitutes an interesting example of a redox‐switchable fullerene derivative.     

Polarization of systems with complex geometry

The article analyzes the current state of studies of concentration polarization in the systems containing various combinations of ion-exchange particles, fibers, membranes and charged diaphragms. It is shown that polarization characteristics of such systems depend not only on the properties of each of the polarized objects and the potential difference applied to the system, but also on the positioning of the system elements in relation to each other.     

Interactions of D-Maltose and Sucrose with Some Amino Acids in Aqueous Solutions

Calorimetric titrations have been performed at 298.15 K in aqueous solutions to derive the stability constants and thermodynamic parameters of the interactions of D-maltose and sucrose with some amino acids (glycine, DL-alanine, DL-leucine, and L-serine). The apparent molal volumes of the disaccharides in dilute aqueous solutions of the amino acids have been determined from density measurements at 298.15 K. In contrast to D-maltose, sucrose was found to associate with the amino acids and these associated species are preferentially entropy stabilized. These results are interpreted in terms of the influence of the nature of the solutes, their specific conformations, and hydration, on the ability of the disaccharides to form associated complexes with the amino acids.     

Methanol electrooxidation on platinum mesh electrodes bonded to solid polymer electrolytes

Methanol electrooxidation on smooth platinum electrodes bonded to solid polymer electrolytes was studied in water and acid solution by voltammetric measurements with different scanning rates. An enhancement of the oxidation rates was observed in these systems as compared to identical platinum electrodes in contact with liquid electrolytes. This electrocatalytic effect strongly depends on the measuring conditions and on the electrode potential. The reasons for the catalytic effects at different potentials are discussed. Received: 8 January 1997 / Accepted: 1 December 1997     

Isomorphous substitutions of rare earth elements for calcium in synthetic hydroxyapatites

Polycrystalline hydroxyapatites Ca(10-x)REE(x)(PO(4))(6)(OH)(2-x)O(x) were synthesized and studied by X-ray powder diffraction, infrared absorption, diffuse-reflectance spectroscopy, and thermogravimetry. The solubility limits x(max) of rare earth elements (REE) in Ca hydroxyapatites decreases with an increasing REE atomic number from x(max) = 2.00 for La, Pr, and Nd to x(max) = 0.20 for Yb at 1100 °C. Refinements of X-ray diffraction patterns by the Rietveld method show that REE atoms substitute for Ca preferentially at the Ca(2) sites of the apatite structure. The substitution decreases the Ca(2)-O(4) atomic distances in the calcium coordination polyhedra and increases the Ca(2)-O(1,2,3) distances. This observation shows that interatomic distances depend not only on radii of the ions involved in the substitution but also on their charges.     

Crystal structure and physical properties of quaternary clathrates Ba8ZnxGe46−x−ySiy, Ba8(Zn,Cu)xGe46−x and Ba8(Zn,Pd)xGe46−x

Three series of vacancy-free quaternary clathrates of type I, Ba₈Zn_xGe_46−x−ySi_y, Ba₈(Zn,Cu)_xGe_46−x, and Ba₈(Zn,Pd)_xGe_46−x, have been prepared by reactions of elemental ingots in vacuum sealed quartz at 800 °C. In all cases cubic primitive symmetry (space group Pm3?n, a∼1.1 nm) was confirmed for the clathrate phase by X-ray powder diffraction and X-ray single crystal analyses. The lattice parameters show a linear increase with increase in Ge for Ba₈Zn_xGe_46−x−ySi_y. M atoms (Zn, Pd, Cu) preferably occupy the 6d site in random mixtures. No defects were observed for the 6d site. Site preference of Ge and Si in Ba₈Zn_xGe_46−x−ySi_y has been elucidated from X-ray refinement: Ge atoms linearly substitute Si in the 24k site whilst a significant deviation from linearity is observed for occupation of the 16i site. A connectivity scheme for the phase equilibria in the “Ba₈Ge₄₆” corner at 800 °C has been derived and a three-dimensional isothermal section at 800 °C is presented for the Ba-Pd-Zn-Ge system. Studies of transport properties carried out for Ba₈{Cu,Pd,Zn}_xGe_46−x and Ba₈Zn_xSi_yGe_46−x−y evidenced predominantly electrons as charge carriers and the closeness of the systems to a metal-to-insulator transition, fine-tuned by substitution and mechanical processing of starting material Ba₈Ge₄₃. A promising figure of merit, ZT ∼0.45 at 750 K, has been derived for Ba₈Zn_7.4Ge_19.8Si_18.8, where pricey germanium is exchanged by reasonably cheap silicon.     

Crystal structure and magnetic properties of Ce7Ni5±xGe3±xIn6 and Pr7Ni5±xGe3±xIn6

The indides Ce₇Ni_5±xGe_3±xIn₆ and Pr₇Ni_5±xGe_3±xIn₆ were synthesized from the elements by arc-melting of the components. Single crystals were grown via special annealing sequences. Both structures were solved from X-ray single crystal diffraction data: new structure type, P6/m, Z=1, a=11.385(2), c=4.212(1) Å, wR₂=0.0640, 634F² values, 25 variables for Ce₇Ni_4.73Ge_3.27In₆ and a=11.355(6), c=4.183(2) Å, wR₂=0.0539, 563F² values, 25 variables for Pr₇Ni_4.96Ge_3.04In₆. Both indides show homogeneity ranges through Ni/Ge mixing (M sites). This new structure type can be derived from the AlB₂ structure type by a substitution of the Al and B atoms by CeM₁₂ and NiIn₆Ce₃ polyhedra (tricapped trigonal prism). Magnetic susceptibility measurements on a polycrystalline sample of Ce₇Ni₅Ge₃In₆ indicated Curie-Weiss like paramagnetic behavior down to 1.71 K with the effective magnetic moment slightly reduced in relation to the value expected for trivalent cerium ions. No magnetic ordering is evident.     

Synthesis and Isolation of the Titanium–Scandium Endohedral Fullerenes—Sc2TiC@Ih‐C80, Sc2TiC@D5h‐C80 and Sc2TiC2@Ih‐C80: Metal Size Tuning of the TiIV/TiIII Redox Potentials

The formation of endohedral metallofullerenes (EMFs) in an electric arc is reported for the mixed‐metal Sc–Ti system utilizing methane as a reactive gas. Comparison of these results with those from the Sc/CH₄ and Ti/CH₄ systems as well as syntheses without methane revealed a strong mutual influence of all key components on the product distribution. Whereas a methane atmosphere alone suppresses the formation of empty cage fullerenes, the Ti/CH₄ system forms mainly empty cage fullerenes. In contrast, the main fullerene products in the Sc/CH₄ system are Sc₄C₂@C₈₀ (the most abundant EMF from this synthesis), Sc₃C₂@C₈₀, isomers of Sc₂C₂@C₈₂, and the family Sc₂C_{2 n} (2 n=74, 76, 82, 86, 90, etc.), as well as Sc₃CH@C₈₀. The Sc–Ti/CH₄ system produces the mixed‐metal Sc₂TiC@C_{2 n} (2 n=68, 78, 80) and Sc₂TiC₂@C_{2 n} (2 n=80) clusterfullerene families. The molecular structures of the new, transition‐metal‐containing endohedral fullerenes, Sc₂TiC@I_h‐C₈₀, Sc₂TiC@D_5h‐C₈₀, and Sc₂TiC₂@I_h‐C₈₀, were characterized by NMR spectroscopy. The structure of Sc₂TiC@I_h‐C₈₀ was also determined by single‐crystal X‐ray diffraction, which demonstrated the presence of a short Ti=C double bond. Both Sc₂TiC‐ and Sc₂TiC₂‐containing clusterfullerenes have Ti‐localized LUMOs. Encapsulation of the redox‐active Ti ion inside the fullerene cage enables analysis of the cluster–cage strain in the endohedral fullerenes through electrochemical measurements.