Oxidation of Ascorbate by Ni(III) Complexes with Tetraaza-macrocyclic Ligands in Neutral Aqueous Solutions. A Pulse-Radiolysis Study

Abstract

The mechanisms and kinetics of oxidation of ascorbate, AH^?, by Ni(III)Lⁱ _aq and by LⁱNi(III) (HPO₄)₂ ^? complexes (L¹ = meso-(5,12)-7,7,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane; L² = 1,8-dimethyl-1,3,6,8,10,13-hexaazacyclotetradecane) in neutral aqueous solutions have been investigated.

The oxidation of ascorbate by the LⁱNi(III) (HPO₄)₂ ^? and Ni(III)L¹ _aq proceeds via two consecutive reactions well separated in time. The products of the first reaction are the A^.? radical anion and the corresponding Ni(II) complex. The oxidations by the LⁱNi(III)(HPO₄)₂ ^? complexes proceed via the outer sphere mechanism, whereas the detailed mechanism of reaction of Ni(III)L¹ _aq cannot be determined. The rate of reaction decreases with the increase in the concentration of phosphate, thus indicating that LⁱNi(III)(HPO₄)(H₂O)⁺ and LⁱNi(III)OH²⁺ are stronger oxidizing agents than LⁱNi(III)(HPO₄)^? ₂.

The oxidation of ascorbate by Ni(III)L² _aq proceeds via three consecutive reactions which are well separated in time. Thus the results clearly point out that this process occurs via the inner sphere mechanism. The first transient observed is tentatively identified as L²(H₂O)Ni(II)(A^.?)²⁺, i.e., an unexpected complex of the ascorbate anion radical. Also in this process the last transient observed is the A^.? anion radical. The stabilization of the ascorbyl radical in a transient complex might be of biological significance.     

A novel homogeneous immunoassay for anthrax detection based on the AlphaLISA method: detection of B. anthracis spores and protective antigen (PA) in complex samples

Amplified Luminescent Proximity Homogeneous Assay (AlphaLISA) technology is an energy-transfer-based assay, utilizing singlet oxygen as an energy donor to a fluorescent acceptor. The long singlet oxygen migration distance allows the energy transfer mechanism to go up to ～200 nm, facilitating flexible and sensitive homogeneous immunoassays. While soluble protein detection using AlphaLISA was previously described, the detection of particles such as bacteria and viruses was not reported. In this work, we show for the first time the implementation of the AlphaLISA technology for the detection of a particulate antigen, i.e., Bacillus anthracis spores. Here, we show that an efficient particle immunoassay requires a high acceptor-to-donor ratio (>4:1). The results suggested that the high acceptor/donor ratio is required to avoid donor aggregation (“islands”) on the spore surface, hence facilitating donor/acceptor interaction. The developed assay enabled the detection of 10⁶ spores/mL spiked in PBS. We also demonstrate the development of a highly sensitive AlphaLISA assay for the detection of the main toxin component of anthrax, protective antigen (PA). The assay enabled the detection of 10 and 100 pg/mL PA in buffer and spiked naïve rabbit sera, respectively, and was successfully implemented in sera of anthrax-infected rabbits. To summarize, this study demonstrates that AlphaLISA enables detection of anthrax spores and toxin, utilizing short homogeneous assays. Moreover, it is shown for the first time that this technology facilitates the detection of particulate entities and might be suitable for the detection of other bacteria or viruses.     

Interfacial synthesis of bisphenol A tetrachlorocyclotriphosphazene from bisphenol A and hexachlorocyclotriphosphazene

The effect of solvent purity on the synthesis and yield of bisphenol A tetrachlorocyclotriphosphazene (BATCCP) has not been described in the literature. The purpose of this research was to synthesize BATCCP hybrid monomers and to evaluate the effect of solvent purity on the BATCCP production. BATCCP monomers were prepared by an interfacial procedure in a water/toluene system as a function of time with the assistance of a phase transfer catalyst, tetraoctylammonium bromide. ¹H and ³¹P NMR confirmed the production of BATCCP monomer by the appearance of chemical shifts at 7.18 and 5.35 ppm in the ¹H NMR and 23.4 and 13.9 ppm in the ³¹P NMR, respectively. Distillation of the toluene, not suggested in previous reports of HCCP hybrid synthesis, resulted in an improvement of actual % yield to 40% and stability of the product throughout the 1440 min reaction as confirmed by MALDI, compared with an 11% actual yield at 15 min, decaying to 2% over a 1440 min reaction when the synthesis was performed with ‘anhydrous toluene’ as provided commercially without further distillation.     

Application of magnetic nanoparticles for the extraction of radium-226 from water samples

Bare (unmodified) and crown ether (CE)-modified Fe₃O₄ magnetic nanoparticles (MNPs) were investigated for the rapid extraction of ²²⁶Ra from water samples. It involved synthesizing the MNPs, introducing them into the sample solutions, ultrasonicating and agitating the suspension, magnetically separating the nanoparticles from solution, and measuring the ²²⁶Ra content in the supernatant. Experimental parameters such as salt choice, salt concentration and pH were optimized to achieve maximum extraction of ²²⁶Ra onto the MNPs. ²²⁶Ra content was determined using a Hidex 300SL liquid scintillation counter with α/β separation capability, or a gamma spectrometric detection system. The bare Fe₃O₄ nanoparticles showed significant pH dependence for the extraction of ²²⁶Ra from an aqueous solution over a pH range of 2–10. They gave an extraction of 95 ± 1 and 98 ± 1 % at pH 9 in 0.1 M NaCl and 0.1 M NaClO₄, respectively, whereas an extraction of 8–24 % was obtained, over the pH ranges from 2 to 5. The CE-modified MNPs yielded extraction efficiencies as high as 99 ± 1 % in the presence of 0.01 M picric acid at pH 4. This study demonstrates that the surface functionalization of Fe₃O₄ MNPs with suitable ligand modification can offer a selective mode of extraction for ²²⁶Ra in the presence of its daughter progenies.     

Synthesis and evaluation of N6-substituted azide- and alkyne-bearing N-mustard analogs of S-adenosyl-l-methionine

The synthesis of a family of N-mustard analogs of S-adenosyl-l-methionine (SAM) containing azides and alkynes at the N6-position of the adenosine base has been accomplished from commercially available inosine. Further biochemical analysis of these analogs indicates successful modification of pUC19 plasmid DNA in an enzyme-dependent fashion with DNA methyltransferases M.TaqI and M.HhaI.     

The k 0 and relative INAA methods to determine elements in entire archaeological pottery objects

The advantages of instrumental neutron activation analysis applied to archaeological ceramics have been enhanced through the analysis of entire objects, using both the k ₀ method and the relative method, respectively, to determine the concentrations of chemical elements in aliquots of replicate objects used as comparators and in the sample object. Twenty-two chemical elements of archaeological importance were measured in mud figurines from Caral civilization (5000 year BC), irradiated inside a well-characterized radial channel facility of the nuclear research reactor at IPEN, Peru. The results showed less than 10 % of bias for most of the elements.     

Aggregation Mode,Host-Guest Chemistry in Water,and Extraction Capability of an Uncharged,Water-Soluble,Liquid Pillar[5]arene Derivative

An uncharged, water-soluble per-ethylene-glycol pillar[5]arene derivative ( 1 ) was synthesized and its aggregation mode, host-guest chemistry in water and extraction ability was explored. Compound 1 is a liquid at room temperature; in water, limited self-aggregation occurred at high concentrations as deduced from diffusion NMR and dynamic light scattering. Compound 1 forms pseudo-rotaxane-like 1 : 1 host-guest complexes with 1,ω-di-substituted alkanes with association constants on the order of 10³–10⁴ m ⁻¹. Interestingly, NMR experiments showed that the guest location relative to the host ring system differs among the different complexes. In proof-of-concept experiments, compound 1 was shown to extract structurally related organic compounds from benzene into water with significant selectivity. Compound 1 , which is a liquid at room temperature and has only limited interactions with its side arms, can, in principle, be regarded as a complement to or as a kind of type I porous liquid.     

Cannabis-Derived Compounds Cannabichromene and Δ9-Tetrahydrocannabinol Interact and Exhibit Cytotoxic Activity against Urothelial Cell Carcinoma Correlated with Inhibition of Cell Migration and Cytoskeleton Organization

Cannabis sativa contains more than 500 constituents, yet the anticancer properties of the vast majority of cannabis compounds remains unknown. We aimed to identify cannabis compounds and their combinations presenting cytotoxicity against bladder urothelial carcinoma (UC), the most common urinary system cancer. An XTT assay was used to determine cytotoxic activity of C. sativa extracts on T24 and HBT-9 cell lines. Extract chemical content was identified by high-performance liquid chromatography (HPLC). Fluorescence-activated cell sorting (FACS) was used to determine apoptosis and cell cycle, using stained F-actin and nuclei. Scratch and transwell assays were used to determine cell migration and invasion, respectively. Gene expression was determined by quantitative Polymerase chain reaction (PCR). The most active decarboxylated extract fraction (F7) of high-cannabidiol (CBD) C. sativa was found to contain cannabichromene (CBC) and Δ9-tetrahydrocannabinol (THC). Synergistic interaction was demonstrated between CBC + THC whereas cannabinoid receptor (CB) type 1 and type 2 inverse agonists reduced cytotoxic activity. Treatments with CBC + THC or CBD led to cell cycle arrest and cell apoptosis. CBC + THC or CBD treatments inhibited cell migration and affected F-actin integrity. Identification of active plant ingredients (API) from cannabis that induce apoptosis and affect cell migration in UC cell lines forms a basis for pre-clinical trials for UC treatment.     

Lensless diffractive imaging using tabletop coherent high-harmonic soft-X-ray beams

We present the first experimental demonstration of lensless diffractive imaging using coherent soft x rays generated by a tabletop soft-x-ray source. A 29 nm high harmonic beam illuminates an object, and the subsequent diffraction is collected on an x-ray CCD camera. High dynamic range diffraction patterns are obtained by taking multiple exposures while blocking small-angle diffraction using beam blocks of varying size. These patterns reconstruct to images with 214 nm resolution. This work demonstrates a practical tabletop lensless microscope that promises to find applications in materials science, nanoscience, and biology.     

Limited path percolation in complex networks

We study the stability of network communication after removal of a fraction q=1-p of links under the assumption that communication is effective only if the shortest path between nodes i and j after removal is shorter than al(ij)(a> or =1) where l(ij) is the shortest path before removal. For a large class of networks, we find analytically and numerically a new percolation transition at p(c)=(kappa(0)-1)((1-a)/a), where kappa(0) [triple bond] / and k is the node degree. Above p(c), order N nodes can communicate within the limited path length al(ij), while below p(c), N(delta) (delta<1) nodes can communicate. We expect our results to influence network design, routing algorithms, and immunization strategies, where short paths are most relevant.