The role of steric and electronic interactions in the stereocontrol of the asymmetric 1,3-dipolar reactions of 5-ethoxy-3-p-(S)-tolylsulfinylfuran-2(5H)-ones with diazoalkanes: theoretical calculations and experimental evidences

The addition of diazomethane and diazoethane to (5S,SS)- and (5R,SS)-5-ethoxy-3-p-tolylsulfinylfuran-2(5H)-ones (1a and 1b) and their 4-methylderivatives (2a and 2b) proceeded in almost quantitative yields and complete regioselectivity. The observed pi-facial selectivity is determined by the configurations at both C-5 and the sulfinyl group, the later being the most important. The syn adducts were almost exclusively obtained from 1a and 2a in apolar solvents but the pi-facial selectivity was strongly decreased in more polar solvents. On the other hand, the major adducts from 1b and 2b were the anti ones and such predominance was slightly increased with solvent polarity. The exo-selectivity was complete in all the cases except for the anti approach to compounds 2a (in polar solvents) and 2b. The role of the sulfinyl group in this behavior was inferred by comparison of these results with those obtained in reactions of diazoalkanes with 5-methoxyfuran-2(5H)-one (3). Steric interactions seem to be the main ones responsible for the observed exo selectivity of reactions with diazoethane, but electronic factors, which can be modulated by the solvent, are also significant in the pi-facial selectivity control. DFT computational methods are able to correctly predict the reactivity, regioselectivity, and pi-facial selectivity exhibited by 5-alkoxyfuranones as well as their changes with the solvent polarity. A C-H.O hydrogen bond, involving the oxygen atom of the 5-alkoxy group at dipolarophiles and the endo-hydrogen atom at dipoles, seems to play a key role in the electronic interactions influencing the stereochemical course of these reactions.     

Application of ultra-low level liquid scintillation to the determination of 222Rn in groundwater

A procedure for the determination of ²²²Rn in environmental water samples using liquid scintillation counting (LSC) was applied. The extractive scintillator RADONS^Ò and an ultra-low background 1220 QuantulusÔ were used. A minimum detectable activity of 0.1 Bq·l^?1 in 20 ml was found with low-diffusion polyethylene vials and 200 minute measurement time. Quenching effects and possible interferences due to the existence of other radionuclides in the extraction process were studied. The procedure was controlled by gamma-ray spectrometry of the ²²²Rn daughters. Applications to environmental samples collected from spas, wells, and public springs in Extremadura (Spain) are presented.     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Flow-injection successive determination of cysteine and cystine in pharmaceutical preparations

A flow-injection configuration is proposed for the individual determination of cysteine and cystine and for the mixtures of both analytes. The procedure is based on the inhibitory effect of cysteine on the oxidation of thiamine to thiochrome by mercury(II). Linear calibration graphs were obtained between 1.0 x 10(-5) and 1.0 x 10(-4)M, with a sampling rate of 22 samples/hr and relative standard deviation of 1.14%. The inclusion of a selecting valve in the configuration, to pump water or hydroxylamine, allows the successive determination of these two analytes. The applicability of the method to the determination of cysteine and cystine in pharmaceutical preparations was demonstrated by investigating the effect of potential interferences and by the analysis of commercial preparations.     

Highly conjugated p-quinonoid pi-extended tetrathiafulvalene derivatives: a class of highly distorted electron donors

A new class of pi-extended TTF-type electron donors (11 a-c) has been synthesized by Wittig-Horner olefination of bianthrone (9) with 1,3-dithiole phosphonate esters (10 a-c). In cyclic voltammetry experiments, donors 11 a-c reveal a single, electrochemically irreversible oxidation-yielding the corresponding dicationic products-at relatively low oxidation potentials (approximately 0.7-0.8 V). Theoretical calculations, performed at the DFT level (B3 P86/6-31 G*), predict a highly-folded C(2h) structure for 11 a. In the ground state, the molecule adopts a double saddle-like conformation to compensate the steric hindrance. The calculations suggest that the intramolecular charge transfer associated with the HOMO-->LUMO transition is responsible for an absorption band observed above 400 nm. While the radical cation 11 a*+ retains the folded C(2h) structure predicted for the neutral molecule as the most stable conformation, the dication 11 a(2+) has a fully aromatic D(2) structure, formed by an orthogonal 9,9'-bianthryl central unit to which two singly-charged dithiole rings are attached. The drastic conformational changes that compounds 11 undergo upon oxidation account for their electrochemical properties. By means of pulse radiolysis measurements, radical-induced one-electron oxidation of 11 a-c was shown to lead to the radical cation species (11 a-c*+), which were found to disproportionate with generation of the respective dication species (11 a-c(2+)) and the neutral molecules (11 a-c).     

Electrochemical and spectral studies on the reductive nitrosylation of water-soluble iron porphyrin

The reaction of iron(III) (meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (Fe(III)TMPyP) with nitric oxide (NO) was studied by electronic absorption spectroscopy, ESR, and electrochemical and spectroelectrochemical techniques in aqueous solutions with pH from 2.2 to 12.0. Fe(III)TMPyP has been found to undergo a reductive nitrosylation in all pHs, and the product of nitric oxide binding to the porphyrin has been determined as iron(II) porphyrin nitrosyl complex ([Fe(II)(NO)TMPyP]). The rate of the reductive nitrosylation exhibits a tendency to get faster with increase in pH. An intermediate species was observed around neutral pH by spectroelectrochemical technique and was proposed to be the iron(II) nitrosyl complex of the mu-oxo dimeric form of FeTMPyP, which is known to be a predominant in neutral solutions.     

Determination of the pH of binary mobile phases for reversed-phase liquid chromatography

The measurement of pH in chromatographic mobile phases has been a constant subject of discussion during many years. The pH of the mobile phase is an important parameter that determines the chromatographic retention of many analytes with acid-base properties. In many instances a proper pH measurement is needed to assure the accuracy of retention-pH relationships or the reproducibility of chromatographic procedures. Three different methods are common in pH measurement of mobile phases: measurement of pH in the aqueous buffer before addition of the organic modifier, measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with standard solutions prepared in the same mobile phase solvent, and measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with aqueous standard solutions. This review discusses the different pH measurement and calibration procedures in terms of the theoretical and operational definitions of the different pH scales that can be applied to water-organic solvent mixtures. The advantages and disadvantages of each procedure are also presented through chromatographic examples. Finally, practical recommendations to select the most appropriate pH measurement procedure for particular chromatographic problems are given.     

Addition reaction of azido-exTTFs to C60: synthesis of fullerotriazoline and azafulleroid electroactive dyads

[structure: see text] The addition reaction of azido-exTTFs to C(60) affords electroactive fullerotriazoline and azafulleroid dyads, which behave as amphoteric redox systems. Fluorescence experiments and transient absorption spectroscopy reveal that excitation of the fullerene moiety leads to radical pair lifetimes that are 2 orders of magnitude higher than those previously reported for related fullerotriazolines.     

Pyrylium-containing polymers as sensory materials for the colorimetric sensing of cyanide in water

A sensory polymeric material for the colorimetric sensing of cyanide in water has been developed based on the reactivity of this anion with the pyrylium cation.     

Reversible colorimetric probes for mercury sensing

The selectivity and sensitivity of two colorimetric sensors based on the ruthenium complexes N719 [bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) bis(tetrabutylammonium) bis(thiocyanate)] and N749 [(2,2':6',2' '-terpyridine-4,4',4' '-tricarboxylate)ruthenium(II) tris(tetrabutylammonium) tris(isothiocyanate)] are described. It was found that mercury ions coordinate reversibly to the sulfur atom of the dyes' NCS groups. This interaction induces a color change in the dyes at submicromolar concentrations of mercury. Furthermore, the color change of these dyes is selective for mercury(II) when compared with other ions such as lead(II), cadmium(II), zinc(II), or iron(II). The detection limit for mercury(II) ions--using UV-vis spectroscopy--in homogeneous aqueous solutions is estimated to be approximately 20 ppb for N719 and approximately 150 ppb for N749. Moreover, the sensor molecules can be adsorbed onto high-surface-area mesoporous metal oxide films, allowing reversible heterogeneous sensing of mercury ions in aqueous solution. The results shown herein have important implications in the development of new reversible colorimetric sensors for the fast, easy, and selective detection and monitoring of mercuric ions in aqueous solutions.