Synthesis, characterization, and optical properties of 4H-pyran-4-ylidene donor-based chromophores: the relevance of the location of a thiophene ring in the spacer

A series of new 4H-pyran-4-ylidene donor-based chromophores with a thiophene ring in the spacer has been synthesized. The linear and nonlinear optical (NLO) properties of these compounds have been determined and compared with the results of computational calculations. The position of the thiophene ring proved essential to optimize the figure of merit μβ, with the best results obtained when the heterocyclic system was closer to the donor moiety.     

[6,6]‐Open and [6,6]‐Closed Isomers of C70(CF2): Synthesis,Electrochemical and Quantum Chemical Investigation

Novel difluoromethylenated [70]fullerene derivatives, C₇₀(CF₂)_n (n=1–3), were obtained by the reaction of C₇₀ with sodium difluorochloroacetate. Two major products, isomeric C₇₀(CF₂) mono‐adducts with [6,6]‐open and [6,6]‐closed configurations, were isolated and their homofullerene and methanofullerene structures were reliably determined by a variety of methods that included X‐ray analysis and high‐level spectroscopic techniques. The [6,6]‐open isomer of C₇₀(CF₂) constitutes the first homofullerene example of a non‐hetero [70]fullerene derivative in which functionalisation involves the most reactive bond in the polar region of the cage. Voltammetric estimation of the electron affinity of the C₇₀(CF₂) isomers showed that it is substantially higher for the [6,6]‐open isomer (the 70‐electron π‐conjugated system is retained) than the [6,6]‐closed form, the latter being similar to the electron affinity of pristine C₇₀. In situ ESR spectroelectrochemical investigation of the C₇₀(CF₂) radical anions and DFT calculations of the hyperfine coupling constants provide evidence for the first example of an inter‐conversion between the [6,6]‐closed and [6,6]‐open forms of a cage‐modified fullerene driven by an electrochemical one‐electron transfer. Thus, [6,6]‐closed C₇₀(CF₂) constitutes an interesting example of a redox‐switchable fullerene derivative.     

Microwave‐Assisted Solid‐Phase Synthesis of a 1,2‐Disubstituted Benzimidazole Library by Using a Phosphonium Linker

An efficient and rapid microwave‐assisted solid‐phase method for the synthesis of 5‐methyl‐1,2‐disubstituted benzimidazoles derivatives has been developed. The phosphonium linker, obtained by reaction between polymer‐supported triphenylphosphine and 4‐fluoro‐3‐nitrobenzyl iodide, underwent aromatic substitution with primary amines, followed by one‐pot reaction with aldehydes in the presence of SnCl₂·2H₂O, yielded the benzimidazole system under microwave irradiation. The final products were released from the resin with NaOH under microwave irradiation and were obtained in high purity and good overall yield.     

Chemical tailoring of fullerene acceptors: synthesis, structures and electrochemical properties of perfluoroisopropylfullerenes

High-temperature syntheses of the new C(60)(i-C(3)F(7))(2,4,6) and C(70)(i-C(3)F(7))(2,4) isomers and their characterization by spectroscopic methods, X-ray crystallography, cyclic voltammetry and density functional theory provide compelling evidence that they are superior electron acceptors than trifluoromethylfullerenes.     

Determination of volatile nitrosamines in meat products by microwave-assisted extraction and dispersive liquid-liquid microextraction coupled to gas chromatography-mass spectrometry

Microwave-assisted extraction (MAE) and dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-mass spectrometry (GC-MS) were evaluated for use in the extraction and preconcentration of volatile nitrosamines in meat products. Parameters affecting MAE, such as the extraction solvent used, and DLLME, including the nature and volume of the extracting and disperser solvents, extraction time, salt addition and centrifugation time, were optimized. In the MAE method, 0.25g of sample mass was extracted in 10mL NaOH (0.05M) in a closed-vessel system. For DLLME, 1.5mL of methanol (disperser solvent) containing 20μL of carbon tetrachloride (extraction solvent) was rapidly injected by syringe into 5mL of the sample extract solution (previously adjusted to pH 6), thereby forming a cloudy solution. Phase separation was performed by centrifugation, and a volume of 3μL of the sedimented phase was analyzed by GC-MS. The enrichment factors provided by DLLME varied from 220 to 342 for N-nitrosodiethylamine and N-nitrosopiperidine, respectively. The matrix effect was evaluated for different samples, and it was concluded that sample quantification can be carried out by aqueous calibration. Under the optimized conditions, detection limits ranged from 0.003 to 0.014ngmL(-1) for NPIP and NMEA, respectively (0.12-0.56ngg(-1) in the meat products).     

Chemometric analysis for optimizing derivatization in gas chromatography‐based procedures

This paper focuses on the application of principal component analysis (PCA) to facilitate the optimization of the derivatization of oestrogenic steroids—estrone, 17β‐estradiol, estriol, 17α‐ethinylestradiol and diethylstilbestrol—in order to achieve (1) the complete derivatization of all the hydroxyl groups contained in the structure of the compounds and (2) the greatest effectiveness of this reaction. Six different derivatization reagents were used in this study, whereas 2‐methyl‐anthracene was applied as the internal standard to evaluate the effectiveness of the reactions. The experimental data were subjected to PCA. With PCA, the dimensionality of the original multivariable data set could be reduced and the selection of optimum conditions for derivatization facilitated. The mixture of 99% N,O‐bis(trimethylsilyl)trifluoroacetamide + 1% trimethylchlorosilane and pyridine (1:1, v/v) at 60 °C for 30 min has been established as the most convenient and efficient means of derivatizing the aforementioned oestrogenic steroids and diethylstilbestrol; the N‐methyl‐N‐(trimethylsilyl)trifluoroacetamide + pyridine (1:1, v/v) mixture seems to be a promising alternative. The application of PCA for optimizing the derivatization procedure, proposed for the first time in this study, is particularly useful in the development of multicomponent methods across several chemical classes of compounds. Copyright © 2011 John Wiley & Sons, Ltd.     

The study of the lipophilicity of some aminoalkanol derivatives with anticonvulsant activity

A series of new (phenoxyethyl)aminoalkanol derivatives were synthesized and evaluated for their anticonvulsant activity. The most promising compound seemed to be (R,S)‐1N‐[(2,6‐dimethyl)phenoxyethyl]amino‐2‐butanol, which displayed anti‐MES activity (in mice, i.p.) with protective index (TD₅₀/ED₅₀) of 5.712, corresponding to that of phenytoin (6.6), carbamazepine (4.9) and valproate (1.7). The lipophilicity of compounds 1–17 exhibiting anticonvulsant activity was investigated. Their lipophilicities (R_M0) were determined using reversed‐phase thin‐layer chromatography (RP‐TLC) with a mixture of acetone and water as mobile phases. The partition coefficients of 1–17 (logP) were also calculated using two computer programs (Pallas and ALOGPS) and compared with R_M0. The relationship between anticonvulsant activity and lipophilicity of the tested substances was estimated. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel Ionophores for Barium‐Selective Electrodes: Synthesis and Analytical Characterization

A novel way of synthesis is developed for the Ba²⁺ selective neutral Ionophore 2a : 2,2′‐[1,2‐phenylenebis(oxyethane‐2,1‐diyloxy)]bis(N‐benzyl‐N‐phenylacetamide) and its methyl ( 2b ), buthyl ( 2c ), and hexyl ( 2d ) derivatives. Ba²⁺ selective electrodes based on Ionophores 2a – d are compared with those with commonly used Ionophore 1 : N,N,N′,N′‐tetracyclohexyl‐oxybis(o‐phenyleneoxy) diacetamide. It is shown that Ionophores 2a – d , particularly 2b , are superior for measurements of Ba²⁺ in the presence of Ca²⁺, and in acidic solutions. Segmented sandwich membrane studies suggest formation of complexes IL₂²⁺ for Ba²⁺, Ca²⁺ and Mg²⁺ ions with Ionophore 2b , while H⁺ ions apparently form complexes H₂L²⁺. The values of the complex formation constants are consistent with the selectivity coefficients.     

Reactions of 4-substituted 5H-1,2,3-dithiazoles with primary and secondary amines: fast and convenient synthesis of 1,2,5-thiadiazoles, 2-iminothioacetamides and 2-oxoacetamides

The treatment of 5H-1,2,3-dithiazole-5-thiones 1 in chloroform under reflux and 5H-1,2,3-dithiazol-5-ones 2 in THF at room temperature with primary aliphatic amines and benzylamine afforded 1,2,5-thiadiazole-3(2H)-thiones 3 and 1,2,5-thiadiazol-3(2H)-ones 6, respectively. The structure of dithiazolone 3f was confirmed by X-ray diffraction analysis. The reaction of dithiazolone 2e bearing an electron-donating methyl group in the 4-position gave 2-oxoacetamide 7e in high yield. The reaction of thiones 1 with secondary aliphatic amines in DMSO yielded 2-iminothioacetamides 8 in moderate yields together with elemental sulfur. Interestingly, the treatment of dithiazolones 2 with secondary amines under the same conditions afforded 2-oxoacetamides 9—the products of the hydrolysis of corresponding imino derivatives 10, which was isolated as 10b. A general mechanism was proposed for the formation of the products.