Adhesion between graphite and modified polyester surfaces: a theoretical study

This study examines the adhesion of graphite to functionalized polyester surfaces using a range of qualitative and quantitative measures of theoretical adhesion. Modifications to the polyester surfaces include the addition of hydroxyl, carboxyl, or fluorine substituents with coverages of 0.4 and 0.9 groups per nm(2). In each case, the introduction of substituents to the surface of the polyester was calculated to lead to reduced adhesion to graphite. Effects of surface relaxation on adhesion are studied by employing different simulation protocols. The theoretical results suggest one mechanism to reduce adhesion to carbonaceous solids is to increase atomic roughness using strongly hydrophilic or alternatively strongly hydrophobic substituents.     

High-density lipoproteins contribute to the alpha-1-globulin zone in capillary electrophoresis of human serum proteins

Alpha-1-antitrypsin (AAT) and alpha-1-acid glycoprotein (AAG) are reported to be the main proteins contributing to the alpha-1-globulin capillary zone electrophoresis (CZE) zone, but the sum (AAT + AAG) showed lower than the alpha-1-globulin. We investigated the role of high-density lipoprotein (HDL), an additional protein migrating in the alpha-1-globulin zone, as a possible cause for such a gap. In a set of 98 sera we measured the alpha-1-globulin with a dedicated clinical capillary electrophoresis system, and AAT, AAG and apolipoprotein A-1 (ApoA) by immunonephelometry. The alpha-1-globulin were consistently higher than the sum (AAT + AAG), by (mean value +/- standard deviation) 1.70 +/- 0.88 g/L in 49 sera with low ApoA, and by 3.59 +/- 0.75 g/L in 49 sera with high ApoA. Corresponding figures in the comparison alpha-1-globulin/(AAT + AAG + ApoA) were reduced to 1.08 +/- 0.77 g/L and 1.67 +/- 0.70 g/L. It is concluded that HDL significantly contribute to the CZE alpha-1-globulin zone, but do not completely explain the differences between the electrophoretic and the immunochemical measurements. However, CZE alpha-1-globulin measurements give information about increases of the two major acute phase proteins comparable to specific protein measurements.     

Design and Enantioselective Synthesis of Cashmeran Odorants by Using “Enol Catalysis”

Novel Cashmeran odorants were designed by molecular modeling. Their short syntheses involve a novel asymmetric Brønsted acid catalyzed Michael addition of unactivated α‐substituted ketones. This key transformation was realized by utilizing a new type of enol activation catalysis and affords different cyclic ketones bearing α‐quaternary stereocenters in good to excellent yields and with high enantioselectivity. Subsequent McMurry coupling and Saegusa–Ito oxidation furnished the enantiopure target odorants, one enantiomer of which indeed possesses the typical olfactory aspects of Cashmeran.     

C(3)-alkylation and cyclization of pyrazino[1,2-b]isoquinolin-4-ones

To avoid the epimerization of the C(11a)-stereocenter previously observed in 6,11a-cis-pyrazino[1,2-b]isoquinolin-1,4-diones, we present in this paper the C(3)-alkylation of 1-methoxy-pyrazino[1,2-b]isoquinolin-4-ones to obtain all-cis derivatives through a very reliable protocol. The success of the acid-promoted cyclization to get pentacyclic (R₃=arylmethyl) or tetracyclic (R₃=2-bromo-2-propenyl) compounds is dependent on the nature of the C(3)-unsaturated chain and of the N-substituent, but these limitations have been overcome by using trifluoromethanesulfonic as a superacid catalyst. The C-(3)-alkylation of pyrazino[1,2-b]isoquinolin-4-one is also studied.     

HPLC-ESI-MS and MS/MS structural characterization of multifucosylated N-glycoforms of the basic proline-rich protein IB-8a CON1+ in human saliva

This study describes the characterization of the glycan moieties and the peptide backbone of six glycoforms of IB-8a CON1(+), a basic proline-rich protein present in human saliva. MS analyses on the intact glycoproteins before and after N-deglycosylation with PNGase F and high-resolution MS/MS sequencing by LTQ Orbitrap XL of peptides and glycopeptides from tryptic digests allowed the structural characterization of the glycan moieties and the polypeptide backbone, as well as to establish the glycosylation site at the asparagine residue at 98th position. Five of the glycoforms carry a biantennary N-linked glycan fucosylated in the innermost N-acetylglucosamine of the core and showing from zero to four additional fucoses in the antennal region. The sixth glycoform carries a monoantennary monofucosylated oligosaccharide. The glycoform cluster was detected on 28 of 71 adult saliva specimens. Level of fucosylation showed interindividual variability with the major relative abundance for the trifucosylated glycoform. Nonglycosylated IB-8a CON1(+) and the variant IB-8a CON1(-), lacking of the glycosylation site, have been also detected in human saliva.     

Intramolecular cyclopropanation of unsaturated terminal epoxides and chlorohydrins

Lithium 2,2,6,6-tetramethylpiperidide (LTMP)-induced intramolecular cyclopropanation of unsaturated terminal epoxides provides an efficient and completely stereoselective entry to bicyclo[3.1.0]hexan-2-ols and bicyclo[4.1.0]heptan-2-ols. Further elaboration of C-5 and C-6 stannyl-substituted bicyclo[3.1.0]hexan-2-ols via Sn-Li exchange/electrophile trapping or Stille coupling generates a range of substituted bicyclic cyclopropanes. An alternative straightforward cyclopropanation protocol using a catalytic amount of 2,2,6,6-tetramethylpiperidine (TMP) allows for a convenient (1 g-7.5 kg) synthesis of bicyclo[3.1.0]hexan-2-ol and other bicyclic adducts. The synthetic utility of this chemistry has been demonstrated in a concise asymmetric synthesis of (+)-beta-cuparenone. The related unsaturated chlorohydrins also undergo intramolecular cyclopropanation via in situ epoxide formation.     

Representation of the molecular topology of cyclical structures by means of cycle graphs. 3. Hierarchical model of screening of chemical databases

The increase in the size and complexity of chemical databases necessitates the proposal and development of efficient methods of classification and recovery of information, which supposes proposal of a model of classification of database records and the use of a compatible model of screening for inspection of clusters and recovery of the molecules that satisfy the search criterion. The cycle graphs model based on consideration of all the cycles and chains (and equivalent cycles and chains) present in the molecular structure has been proven appropriate for classification of chemical databases, giving rise to a generation of different classification levels depending on the structural elements (cycles and chains) that are considered. In this paper we propose a screening model, compatible with the cycle graphs model, based on a hierarchy of levels of abstraction. The set of molecules that satisfies a screening model (or selection criterion) diminishes as we advance in the hierarchy of levels of the model, which allows filtering of records and, therefore, an increase in the efficiency of the screening process. In the following work of this series we describe and validate the screening tool developed.     

Determination of UV filters in river water samples by in‐line SPE‐CE‐MS

The use of SPE coupled in‐line to CE using electrospray MS detection (in‐line SPE‐CE‐ESI‐MS) was investigated for the preconcentration and separation of four UV filters: benzophenone‐3, 2,2‐dihydroxy‐4‐methoxybenzophenone, 2,4‐dihydroxybenzophenone and 2‐phenylbenzimidazole‐5‐sulphonic acid. First, a CE‐ESI‐MS method was developed and validated using standard samples, obtaining LODs between 0.06 μg/mL and 0.40 μg/mL. For the in‐line SPE‐CE‐ESI‐MS method, three different sorbents were evaluated and compared: Oasis HLB, Oasis MCX, and Oasis MAX. For each sorbent, the main parameters affecting the preconcentration performance, such as sample pH, volume, and composition of the elution plug, and sample injection time were studied. The Oasis MCX sorbent showed the best performance and was used to validate the in‐line SPE‐CE‐ESI‐MS methodology. The LODs reached for standard samples were in the range between 0.01 and 0.05 ng/mL with good reproducibility and the developed strategy provided sensitivity enhancement factors between 3400‐fold and 34 000‐fold. The applicability of the developed methodology was demonstrated by the analysis of UV filters in river water samples.     

Hydrophilic interaction liquid chromatography/positive ion electrospray ionization mass spectrometry method for the quantification of perindopril and its main metabolite in human plasma

A validated method based on liquid chromatography/positive ion electrospray–mass spectrometry (LC-ESI/MS) is described for the quantification of perindopril and its active metabolite, perindoprilat, in human plasma. The assay was based on 500-μL plasma samples, following solid-phase extraction using Oasis HLB cartridges. All analytes and the internal standard (trandolapril) were separated by hydrophilic interaction liquid chromatography using a SeQuant Zic-HILIC analytical column (150.0?×?2.1 mm i.d., particle size 3.5 μm, 200 Å) with isocratic elution. The mobile phase consisted of 10% 5.0 mM ammonium acetate water solution in a binary mixture of acetonitrile/methanol (60:40, v/v) and pumped at a flow rate of 0.10 mL min^?1. Quantitation of the analytes was performed with selected ion monitoring (SIM) in positive ionization mode using electrospray ionization interface. The assay was found to be linear in the concentration range of 5.0–500.0 ng mL^?1 for perindopril and perindoprilat. Intermediate precision were found less than 3.5% over the tested concentration ranges. A run time of less than 6.0 min for each sample made it possible to analyze a large number of human plasma samples per day. The method is the first reported application of HILIC in the analysis of angiotensin-converting enzyme inhibitors and can be used to quantify perindopril and perindoprilat in human plasma covering a variety of pharmacokinetic or bioequivalence studies.     

Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration

The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance—Metrology in Chemistry at the International Bureau of Weights and Measures.