Ru_n(n=2~8)金属团簇的结构和能级分布的DFT研究

采用密度泛函理论中的广义梯度近似(DFT/GGA)方法,对Run团簇(n = 2~8)的几何结构与稳定性、束缚能以及能级分布的关系进行了研究,并分析了随着团簇原子数的增加,团簇的几何结构和费米能级的变化,结果表明:Ru簇的几何结构在4个原子以前是平面结构,而从5个原子开始为空间立体的稳定结构,束缚能随金属原子数的增加而增加。能级结构呈明显的分立特征,费米能级随原子个数的增加而增加,但从Ru7开始又有所降低,且团簇的能量间隙逐渐减小,趋近于大块金属的能级特征。     

Evaluation of different mediator-modified screen-printed electrodes used in a flow system as amperometric sensors for NADH

This work presents a comparative study between two different methods for the preparation of mediator-modified screen-printed electrodes, to be used as detectors in a reliable flow injection system for the determination of the nicotinamide adenine dinucleotide (NADH) coenzyme. The best strategy was selected for the final development of compact biosensors based on dehydrogenase enzymes. For the first immobilisation strategy, different redox mediators were electropolymerised onto the SPE surface. The second immobilisation strategy was carried out using polysulfone–graphite composites, which were deposited by screen-printing technology onto the screen-printed electrode (SPE) surface. Both methods achieved an effective and reliable incorporation of redox mediators to the SPE configuration. Finally, a flow system for ammonium determination was developed using a glutamate dehydrogenase (GlDH)-Meldola's Blue (MB)-polysulfone-composite film-based biosensor.

The stability of the redox mediators inside the composite films as well as the negligible fouling effect observed on the electrode surface improve the repeatability and reproducibility of the sensors, important features for continuous analysis in flow systems. Furthermore, the optimised bio/sensors, incorporated in a flow injection system, showed good sensitivities and short response times. Such a good analytical performance together with the simple and fast sensor construction are interesting characteristics to consider the polysulfone-composite films as attractive electrochemical transducer materials for the development of new dehydrogenase-based SPEs.     

Gas chromatographic method for the determination of N-acetyl-S-(N-methylcarbamoyl)cysteine, a metabolite of N,N-dimethylformamide and N-methylformamide, in human urine

A simple method has been developed for the determination of N-acetyl-S-(N-methylcarbamoyl)cysteine in human urine. Treatment of a urine sample (1 ml) with ethanol (2 ml) and potassium carbonate (1.5 g) produces ethyl N-methylcarbamate, which is extracted into ethanol and measured by packed column gas chromatography with nitrogen-sensitive detection. The limit of quantitation in human urine is 1 microgram/ml and the between-sample coefficient of variation is 5-11%. Simultaneously, N,N-dimethylformamide, N-methylformamide and formamide can also be determined.     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

A molecular mechanics study of the effect of substitution in position 1 on the conformational space of the oxytocin/vasopressin ring

Summary The effect of the substitution in position 1 on the low-energy conformations of the oxytocin/vasopressin 20-membered ring was investigated by means of molecular mechanics. Three representative substitutions were considered: -mercapto-,-dimethyl)propionic acid (Dmp), (-mercapto-,-cyclopentamethylene)propionic acid (Cpp), both forming strong antagonists, and (,-dimethyl--mercapto)propionic acid (-Dmp), forming analogs of strongly reduced biological activity, with the -mercaptopropionic (Mpa) residue taken as reference. Both ECEPP/2 (rigid valence geometry) and AMBER (flexible valence geometry) force fields were employed in the calculations. Three basic types of backbone conformations were taken into account which are distinguished by the type of -turn at residues 3 and 4: 1/III, II, and I/III, all types containing one or two intra-annular hydrogen bonds. The allowed (ring-closed) disulfide-bridge conformations were searched by an algorithm formulated in terms of scanning the disulfide-bridge torsional angle C-S-S-C. The ECEPP/2 and AMBER energies of the obtained conformations were found to be in reasonable agreement. Two of the low-energy conformers of the [Mpa¹]-compound agreed very well with the cyclic part of the two conformers found in the crystal structure of [Mpa¹]-oxytocin. An analysis of the effect of -substitution on relative energies showed that the conformations with the N-C-CH₂-CH₂ (₁) and C-CH₂-CH₂-S (₁) angles of the first residue around (–100°, 60°) and (100°, –60°) are not affected; this in most cases implies a left-handed disulfide bridge. In the case of -substitution the allowed values of ₁ are close to ± 60°. This requirement, being in contradiction to the one concerning -substitution, could explain the very low biological activity of the -substituted analogs. The conformational preferences of substituted compounds can largely be explained by the analysis of local interactions within the first residue. Based on the selection of the conformations which are low in energy for both the reference and -substituted compounds, two distinct types of possible binding conformations were proposed, the first one being similar to the crystal conformer with a left-handed disulfide bridge, the second one having a right-handed bridge, but a geometry different from that of the crystal conformer with the right-handed bridge. The first type of disulfide-bridge arrangement is equally favorable for both I/III and II types of backbone structure, while the second one is allowed only for the II type of backbone. No conformation of the I/III type has a low enough energy to be considered as a possible binding conformation for all of the active compounds studied in this work.     

Distribution of fallout radionuclides through soil surface layer

The distribution of¹³⁷Cs through soil layers has been investigated by field sampling. The investigation deals with¹³⁷Cs concentration found after the Chernobyl accident. The relationship between important soil characteristics, total precipitation and cesium distribution are analyzed. Cesium is strongly sorbed in the top soil layer and its migration downward is limited. Measurements performed over a 3-year period revealed that approximately 20–38 per cent of total¹³⁷Cs is located in the upper soil layer.     

Numerical study of colloidal suspensions of soft spherical particles using the network method. 1. DC electrophoretic mobility

The electrophoretic mobility of a spherical particle coated with a uniformly charged permeable membrane and suspended in a general electrolyte solution is calculated numerically. The network simulation method used makes it possible to solve the problem without any restrictions on the values of the parameters such as the membrane thickness, fixed charge density in the membrane, viscous drag in the membrane, number and valence of the ionic species, and electrolyte concentration. The theoretical model used is similar to the one presented by Ohshima (H. Ohshima, J. Colloid Interface Sci. 228 (2000) 190), except for the inclusion in the force balance equation of an additional term corresponding to the force exerted by the liquid on the core of the moving particle. This inclusion is theoretically proven in the limiting case of a nonconducting suspending medium, in which the equation system can be analytically solved. The results obtained coincide with existing analytical expressions when the electrolyte concentration is high, the membrane is thick, and its resistance to the fluid flow is high.     

A Large Volume Injection Procedure for GC-MS Determination of PAHs and PCBs

A simple on-column injection system for large volume of liquid samples for the GC-MS determination of traces of PAHs and PCBs has been investigated. A deactivated fused silica capillary 20 m × 0.53 mm I.D. and 2 meters of an HP5 column (0.53 mm,1 m film thickness) were used as retention gaps. Injection volumes of 80 L for PAHs and 90 L for PCBs, allow determination of 5–50 ng L^–1 PAHs and 11–44 ng L^–1 PCBs in hexane solution with an RSD of < 10%. The method has been used for the determination of PCBs and PAHs in soil sample.     

Preparation and stereoselectivity of 1,3-dipolar cycloaddition ofD-glucose-derived nitrones to N-arylmaleimides

Summary Nitrones2 derived fromD-glucose oxime and benzaldehydes without employing any protection of hydroxyl group were isolated in pure state. The 1,3-dipolar cycloaddition of2 to N-arylmaleimides gave predominantly theanti isoxazolidines3 and was rationalized byZ/E isomerization of N-glycosylnitrones2. The structure and steric configuration of the products have been assigned on the basis of¹H- and¹³C-NMR spectroscopy. AM1 calculations of the nitrones and MM2 calculations of the adducts were performed.

---

Darstellung und Stereoselektivität der 1,3-dipolaren Cycloaddition vonD-Glucose-abgeleiteten Nitronen an N-Arylmaleimiden

Zusammenfassung Die Nitrone2 wurden ausD-Glucoseoxim und Benzaldehyden ohne Schutz von Hydroxylgruppen in reinem Zustand erhalten. Die 1,3-dipolare Cycloaddition von2 an N-Arylmaleimiden ergab bevorzugt dieanti-Isoxazolidine3; dies wurde über eineZ/E-Isomerisierung der N-Glycosylnitrone2 rationalisiert. Struktur und Stereochemie wurden auf Basis von¹H- und¹³C-NMR-Spektroskopie ermittelt. Außerdem wurden AM1-Berechnungen an den Nitronen und MM2-Rechnungen an den Addukten ausgeführt.

     

Exo-metal coordination by a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 dimer in [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (2-NC5H4 = 2-pyridyl, C5H5N = pyridine)

The in situ reaction of the phosphazane dimer [CIP(mu-N-2-NC5H4)]2 (2) with CuCl in the presence of CsH5N/H2O gives the title complex [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (1), containing a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 ligand which is isoelectronic with species of the type [(P(mu-NR))2NR]2.