Reductive dechlorination of 2,4-dichlorophenol by Pd/Fe nanoparticles prepared in the presence of ultrasonic irradiation

Palladium/Iron (Pd/Fe) nanoparticles were prepared by using ultrasound strengthened liquid phase reductive method to enhance dispersion and avoid agglomeration. The dechlorination of 2,4-dichlorophenol (2,4-DCP) by Pd/Fe nanoparticles was investigated to understand its feasibility for an in situ remediation of contaminated groundwater. Results showed that 2,4-DCP was first adsorbed by Pd/Fe nanoparticles, then quickly reduced to o-chlorophenol (o-CP), p-chlorophenol (p-CP), and finally to phenol (P). The induction of ultrasound during the preparation of Pd/Fe nanoparticles further enhanced the removal efficiency of 2,4-DCP, as a result, the phenol production rates increased from 65% (in the absence of ultrasonic irradiation) to 91% (in the presence of ultrasonic irradiation) within 2 h. Our data suggested that the dechlorination rate was dependent on various factors including Pd loading percentage over Fe⁰, Pd/Fe nanoparticles availability, temperature, mechanical stirring speed, and initial pH values. Up to 99.2% of 2,4-DCP was removed after 300 min reaction with these conditions: Pd loading percentage over Fe⁰ 0.3 wt.%, initial 2,4-DCP concentration 20 mg L^?1, Pd/Fe dosage 3 g L^?1, initial pH value 3.0, and reaction temperature 25 °C. The degradation of 2,4-DCP followed pseudo-first-order kinetics reaction and the apparent pseudo-first-order kinetics constant was 0.0468 min^?1.     

Theoretical study on the atmospheric formation of sulfur trioxide as the primary agent for acid rain

The reaction mechanism of SO₂ with O₃ on the singlet potential energy surface has been investigated theoretically at the G3MP2B3//B3LYP/6-311+G(3df) level of theory. The reactants are initially associated with adducts IN1(O₂S–OOO) and IN2(OS-cyclic O₄) in a barrier-less process. Subsequently, these adducts undergo isomerization and dissociation processes to produce cis-OSOO + ³O₂, SO₃(C _s ) + ³O₂ and SO₃(D _3h ) + ³O₂ products. The SO₃(D _3h ) + ³O₂ is major product and the cis-OSOO + ³O₂ and SO₃(C _s ) + ³O₂ are minor products. No stable pathway has been found for the formation of trans-OSOO and cyclic-SOOO isomers in the reaction of SO₂ + O₃. For major product, the rate constant of SO₂ + O₃ reaction is 2.30 × 10⁻²³ cm³ molecule⁻¹ s⁻¹, at room temperature and atmospheric pressure.     

Binuclear vanadium(V) complexes of bis(aryl)adipohydrazone: synthesis,spectroscopic studies,crystal structure and catalytic activity

Three new binuclear vanadium(V) complexes of bis(aryl)adipohydrazones (H₄L¹ = bis((2-hydroxynaphthalen-1-yl)methylene)adipohydrazide, H₄L² = bis(5-bromo-2-hydroxybenzylidene)adipohydrazide, and H₄L³ = bis(2-hydroxy-3-methoxybenzylidene)adipohydrazide) were synthesized by direct reaction of [VO(acac)₂] with the hydrazone ligands. The ligands and complexes were characterized by FT–IR, UV–Vis, and NMR spectroscopic methods. The crystal structures of the complexes of L¹ and L³ were determined by X-ray analyses. The solid-state structure of the complex of L¹ features a 1D hydrogen-bonded chain from N⋯H–O hydrogen bonding. The catalytic activities of these complexes have been tested in the oxidation of various hydrocarbons using H₂O₂ as the terminal oxidant. Generally, good to excellent conversions have been obtained.     

A vertically aligned carbon nanotube-based impedance sensing biosensor for rapid and high sensitive detection of cancer cells

A novel vertically aligned carbon nanotube based electrical cell impedance sensing biosensor (CNT-ECIS) was demonstrated for the first time as a more rapid, sensitive and specific device for the detection of cancer cells. This biosensor is based on the fast entrapment of cancer cells on vertically aligned carbon nanotube arrays and leads to mechanical and electrical interactions between CNT tips and entrapped cell membranes, changing the impedance of the biosensor. CNT-ECIS was fabricated through a photolithography process on Ni/SiO(2)/Si layers. Carbon nanotube arrays have been grown on 9 nm thick patterned Ni microelectrodes by DC-PECVD. SW48 colon cancer cells were passed over the surface of CNT covered electrodes to be specifically entrapped on elastic nanotube beams. CNT arrays act as both adhesive and conductive agents and impedance changes occurred as fast as 30 s (for whole entrapment and signaling processes). CNT-ECIS detected the cancer cells with the concentration as low as 4000 cells cm(-2) on its surface and a sensitivity of 1.7 × 10(-3)Ω cm(2). Time and cell efficiency factor (TEF and CEF) parameters were defined which describe the sensor's rapidness and resolution, respectively. TEF and CEF of CNT-ECIS were much higher than other cell based electrical biosensors which are compared in this paper.     

N-Chlorosuccinimide is a convenient oxidant for the synthesis of 2,4-disubstituted 1,2,4-thiadiazolidine-3,5-diones

N-Chlorosuccinimide has been identified as a convenient and safe alternative oxidant for the oxidative condensation of isothiocyanates and isocyanates to afford 1,2,4-thiadiazolidine-3,5-diones.     

Synthesis of new substituted cylopentenone derivatives via a one-pot three-component reaction between arylglyoxals,acetylacetone, and amines in aqueous media

An efficient one-pot method for the synthesis of new substituted cylopentenone derivatives is described via reaction of arylglyoxals and acetylacetone with aliphatic amines. This reaction was carried out in aqueous media in the absence of any catalyst or promoter to produce substituted cylopentenone in high yield.     

A novel ternary GO@SiO2‐HPW nanocomposite as an efficient heterogeneous catalyst for the synthesis of benzazoles in aqueous media

A new solid acid catalyst, consisting of 12‐phosphotungstic heteropoly acid (HPW) supported on graphene oxide/silica nanocomposite (GO@SiO₂), has been developed via immobilizing HPW onto an amine‐functionalized GO/SiO₂ surface through coordination interaction (GO@SiO₂‐HPW). The GO@SiO₂‐HPW nanocomposite was characterized by Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD). The prepared nanocomposite could be dispersed homogeneously in water and further used as a heterogeneous, reusable, and efficient catalyst for the synthesis of benzimidazoles and benzothiazoles by the reaction of 1,2‐phenelynediamine or 2‐aminothiophenol with different aldehydes.     

TiO2‐nanoparticles as efficient catalysts for the synthesis of pyridine dicarbonitriles

The catalytic effects of two forms of nano‐TiO₂, which are prepared via an ordinary or a magnetized process, are investigated in the synthesis of pyridine dicarbonitriles by one‐pot multicomponent reaction of 4‐methyl thiophenol, malononitrile, and aryl aldehydes. The results have shown that both prepared nano‐TiO₂ exhibited high catalytic activities toward the synthesis of pyridine dicarbonitrile derivatives but the nano‐TiO₂, which is prepared via a magnetized process, has shown better catalytic activity. Furthermore, this new catalytic method for the synthesis of pyridine dicarbonitriles provides rapid access to the desired compounds in high yields and so a simple work‐up procedure in the presence of water at room temperature. Therefore, this method represents a significant improvement incompatible of the other methods that are available for the synthesis of pyridine dicarbonitriles.     

State‐of‐the‐Art and Trends in Synthesis,Properties, and Application of Quantum Dots‐Based Nanomaterials

Quantum dots (QDs) with a nanoscale size range have attracted significant attention in various areas of nanotechnology due to their unique properties. Different strategies for the synthesis of QD nanoparticles are reported in which various factors, such as size, impurities, shape, and crystallinity, affect the QDs fundamental properties. Consequently, to obtain QDs with appropriate physical properties, it is required to select a synthesis method which allows enough control over the surface chemistry of QDs through fine‐tuning of the synthesis parameters. Moreover, QDs nanocrystals are recently used in multidisciplinary research integrated with biological interfaces. The state‐of‐the‐art methods for synthesizing QDs and bioconjugation strategies to provide insight into various applications of these nanomaterials are discussed herein.     

Radiative properties of matter based on quantum statistical method

We present the preliminary results of our code OPAQS(opacity calculation using quantum statistical model) that is based on the self consistent Hartree-Fock-Slater model for the average atom. The code is capable of performing robust calculations of average charge state, frequency-dependent and mean opacities. The accuracy of the atomic model is verified by comparing the calculations of average charge state with various published results. The monochromatic opacities for iron computed at different sets of temperatures and densities are compared with LEDCOP. The Rosseland and Planck opacities for iron and aluminum are validated with some state-of-the-art codes. The results are in good agreement with the published data.