Nanofluid in Hydrophilic State for EOR Implication Through Carbonate Reservoir

More than 50% of oil is trapped in petroleum reservoirs after applying primary and secondary recovery methods for removal. Thus, to produce more crude oils from these reservoirs, different enhanced oil recovery (EOR) approaches should be performed. In this research, the effect of hydrophilic nanoparticles of SiO₂ at 12 nm size, in (EOR) from carbonate reservoir is systematically investigated. Using this nanoparticle, we can increase viscosity of the injection fluid and then lower the mobility ratio between oil and nanofluid in carbonate reservoirs. To this end, a core flooding apparatus was used to determine the effectiveness and robustness of nanosilica for EOR from carbonate reservoirs. These experiments are applied on the reservoir carbonate core samples, which are saturated with brine and oil that was injected with nanoparticles of SiO₂ at various concentrations. The output results depict that, with increasing nanoparticle concentration, the viscosity of the injection fluid increases and results in decreased mobility ratio between oil and nanofluid. The results confirm that using the nanoparticle increases the recovery. Also, increasing the nanoparticle concentration up to 0.6% increases the ultimate recovery (%OOIP), but a further increase to 1.0 does not have a significant effect.     

Preclinical evaluation of 188 Re-HYNIC-PSMA as a novel therapeutic agent

Journal of Radioanalytical and Nuclear Chemistry - In this study, optimized preparation, quality control, cell assessments and biostribution of 188Re-HYNIC-PSMA in normal rats and tumor bearing...     

Energy and exergy analysis of a novel turbo-compounding system for supercharging and mild hybridization of a gasoline engine

Journal of Thermal Analysis and Calorimetry - Number of hybrid vehicles has increased around the world significantly. Automotive industry is utilizing the hybridization of the powertrain system to...     

The importance of electron correlation in graphene and hydrogenated graphene

Local density approximation (LDA) and Green function effective Coulomb (GW) calculations are performed to investigate the effect of electronic correlations on the electronic properties of both graphene and graphane. The size of band gap in graphane increases from 3.7 eV in LDA to 4.9 eV in GW approximation. By calculating maximally localized Wannier wave functions, we evaluate the necessary integrals to get the Hubbard U and the exchange J interaction from first principles for both graphene and graphane. Our ab-initio estimates indicate that in the case of graphene, in addition to the hopping amplitude t ～ 2.8 eV giving rise to the Dirac nature of low lying excitations, the Hubbard U value of ～8.7 eV gives rise to a super-exchange strength of J _AFM ～ 3.5 eV. This value dominates over the direct (ferromagnetic) exchange value of J _FM ～ 1.6 eV. This brings substantial Mott-Heisenberg aspects into the problem of graphene. Moreover, similarly large values of the Hubbard and super-exchange strength in graphane suggests that the nature of gap in graphane has substantial Mott character.     

A novel method for risk assessment of electrostatic sensitivity of nitroaromatics through their activation energies of thermal decomposition

This study presents a novel relationship between electric spark sensitivity of nitroaromatic energetic compounds and their activation energies of thermal decomposition. The new correlation can help to elucidate the mechanism of initiation of energetic materials by electric spark. It can be used to predict the magnitude of electric spark sensitivity of new nitroaromatics, which is difficult to measure. The methodology assumes that electric spark sensitivity of a nitroaromatic energetic compound with general formula C_aH_bN_cO_d can be expressed as a function of its activation energy of thermal decomposition as well as optimized elemental composition and the contribution of specific molecular structural parameters. The new correlation has the root mean square and the average deviations of 1.43 and 1.17 J, respectively, for 22 nitroaromatic energetic compounds with different molecular structures. The proposed new method is also tested for eight nitroaromatic energetic compounds, which have complex molecular structures, e.g., 1,3,7,9-tetranitrophenoxazine, 2,4,6-tris(2,4,6-trinitrophenyl)-1,3,5-triazine, and 1-(2,4,6-trinitrophenyl)-5,7-dinitrobenzotriazole.     

Preparation of ethylene/α-olefins copolymers using (2-RInd)2ZrCl2/MCM-41 (R:Ph,H) catalyst,microstructural study

(2-RInd)₂ZrCl₂ (R:Ph,H) catalyst was supported on MCM-41 and ethylene copolymerization behavior as well as microstructure of copolymers were studied. A steady rate–time profile behavior was observed for homo and copolymerization of ethylene using supported catalysts. It was noticed that increasing the comonomer content can result in lower physical properties. The obtained results indicated that (2-PhInd)₂ZrCl₂/MCM-41 had higher ability of comonomer incorporation than the non-substituted supported catalysts. The CCC, CCE, and ECC (C: comonomer, E: ethylene) triad sequence distribution in backbone of copolymers were negligible, that means no evidence could be detected for comonomer blocks. The polymer characterization revealed that utilizing 1-octene instead of 1-hexene as the comonomer leads to more heterogeneous distribution of chemical composition. The heterogeneity of the chemical composition distribution and the physical properties were influenced by the type of comonomer and catalyst. (2-PhInd)₂ZrCl₂/MCM-41 produced copolymers containing narrower distribution of lamellae (0.3–1 nm) than the copolymer produce using Ind₂ZrCl₂/MCM-41 (0.3–1.6 nm).     

A simple and effcient approach to one-pot synthesis of mono- and bis-N-aryl-3-aminodihydropyrrol-2-one-4-carboxylates catalyzed by InCl3简

An efficient and straightforward procedure has been developed for the synthesis of highly substituted mono- and bis-N-aryl-3-aminodihydropyrrol-2-one-4-carboxylates via a one-pot, four-component domino reaction of amines, dialkyl acetylenedicarboxylates and formaldehyde in the presence of InCl3 （20 mol%） in MeOH at ambient temperature. The salient advantages of this method are mild reaction conditions, environmentally benign, high to excellent yields, shorter reaction times, easy operation and no column chromatographic separation.     

以方沸石负载Ni(Ⅱ)催化剂修饰的电极电氧化甲醇(英文)

There is a high overvoltage in the oxidation of methanol in fuel cells,and so modified electrodes are used to decrease it.A modified electrode that used Ni(II) loaded analcime zeolite to catalyze the electrooxidation of methanol in alkaline solution was proposed.Analcime zeolite was synthesized by hydrothermal synthesis,and Ni(II) ions were incorporated into the analcime structure,which was then mixed with carbon paste to prepare modified electrode.The electrocatalytic oxidation of methanol on the surface of the modified electrode in alkaline solution was investigated by cyclic voltammetry and chronoamperometry.The effects of the scan rate of the potential,concentration of methanol,and amount of zeolite were investigated.The rate constant for the catalytic reaction of methanol was 6 × 103 cm3 mol-1 s-1 from measurements using chronoamperometry.The proposed electrode significantly improved the electron transfer rate and decreased the overpotential for methanol oxidation.