SHESSLOC: A selective variation of the FUCOUP sequence

In this paper we carried out a comparison between all the possible selective versions of the basic heteronuclear correlation experiment, the FUCOUP sequence. We concluded that the best experiment is that one in which the selective pulse is given in the carbon dimension, which we called SHESSLOC (Selective HEteronuclear Simultaneous Short and LOng-range Correlations). The sensitivity of the sequence was improved with the introduction of pulsed field gradients.     

Thermal decomposition mechanism of iron(III) nitrate and characterization of intermediate products by the technique of computerized modeling

The nonahydrate of iron(III) nitrate shows no phase transitions in the range of ?40 to 0 °C. Both hexahydrate Fe(NO₃)₃·6H₂O and nonahydrate Fe(NO₃)₃·9H₂O have practically the same thermal behavior. Thermal decomposition of iron nitrate is a complex process which has a different mechanism than those described for other trivalent elements. Thermolysis begins with the successive condensation of 4 mol of the initial monomer accompanied by the loss of 4 mol of nitric acid. At higher temperature, hydrolytic processes continue with the gradual elimination of nitric acid from resulting tetramer and dimeric iron oxyhydroxide Fe₄O₄(OH)₄ is formed. After complete dehydration, oxyhydroxide is destroyed leaving behind 2 mol of Fe₂O₃. The molecular mechanics method provides a helpful insight into the structural arrangement of intermediate compounds.     

Rapid calcination of ferrite Ni0.75Zn0.25Fe2O4 by microwave energy

Ferrites Ni_0.75Zn_0.25Fe₂O₄ were obtained by polymeric precursor method and calcined in a short time with microwave energy to assess the morphological and microstructural characteristics. Samples were calcined at 500, 650, 800, and 950 °C for 30 min in a microwave oven. The resulting powders were characterized by thermal analysis (TG/DSC), X-ray diffraction (XRD), Fourier transform infrared spectrometer, field-emission gun scanning electron microscope (FEG-SEM), and energy-dispersive X-ray spectroscopy. The XRD results showed the formation of single ferrite phase at temperature of 500 °C for 30 min. The FEG-SEM analysis showed agglomerated particles with formation of non-dense longitudinal plates, with interparticle porosity and agglomerated fine particles. The rapid calcination by microwave energy demonstrated satisfactory results in relatively low temperature of 500 °C for 30 min and appeared to be a promising technique for obtaining nickel–zinc ferrite powders.     

Physico-chemical and anatomical characterization of residual lignocellulosic fibers

Anatomical and physico-chemical properties of residual natural fibers (sugarcane bagasse, coconut fibers and peanut hulls) were characterized in order to evaluate their potential for use in the production of particleboard. The bulk density was determined by helium pycnometer and the chemical characteristics by using an electronic pH meter (for pH determination) on fibers dissolved in acidic and neutral detergents (to determine the levels of cellulose, hemicellulose and lignin). The anatomical characteristics were established using scanning electron microscopy coupled with an X-ray detector system, as well as energy dispersive X-ray spectroscopy. Results indicated similarities and differences between physico-chemical and anatomical characteristics of the residual lignocellulosic fibers when compared with the Pinus sp. wood commercially employed in particleboard production. Bulk density and pH for residual lignocellulosic fibers and Pinus sp. wood presented analogous values. Similar amounts of cellulose and lignin were identified between waste fibers and Pinus sp. wood. The presence of silica was identified in coconut fiber, peanut hull and sugarcane bagasse waste fibers, and may affect the mechanical characteristics of panels. Coconut and sugarcane bagasse fibers show surface pores with diameters ranging from 1.2 to 2.1 μm, below the 5 μm identified for Pinus sp. wood. Both fibers present pores distributed over their entire surface, whereas peanut hull fibers have no pores on their surface. This characteristic contributes to resin dispersion among particles, reflecting positively on the physical–mechanical properties of the panels. Particleboards produced with residual lignocellulosic fibers present similar physical–mechanical properties to those of Pinus sp. wood panels.     

Atmospheric Pressure Plasma Pretreatment of Sugarcane Bagasse: the Influence of Biomass Particle Size in the Ozonation Process

Atmospheric pressure O₂ plasma was used to produce ozone in order to treat sugarcane bagasse as a function of particle sizes. The fixed bagasse moisture content was 50 %. The delignification efficiency had small improvement due to ozonation process as a function of particle size, varying from 75 up to 80 %. Few amounts of hemicellulose were removed, but the ozonation has not been affected significantly with particle size variance as well (from 30 up to 35 %). The cellulose presented some losses below 1.0 mm size (8–15 %) which was an unexpected result. The conversion of cellulose content into free sugar has shown a significant increase as the particle size has diminished as well. The best condition of the bagasse particle size was for 0.08 mm. For this case, a great quantity of cellulose (78.8 %) was converted into glucose. Optical absorption spectroscopy was applied to determine ozone concentrations in real time where the samples with typical bagasse particle sizes equal or below to 0.5 mm had shown a better absorption of ozone in comparison with greater particle size samples.     

Sodium sulfate influence on the electrodeposition of MnO2 films for application in Supercapacitors

Journal of Solid State Electrochemistry - Manganese dioxide (MD) was synthesized by cyclic voltammetry using 0.5 mol L−1 MnSO4·6H2O as the precursor solution, with and...     

Vitamin C and Phenolic Antioxidants of Jua (Ziziphus joazeiro M.) Pulp: A Rich Underexplored Brazilian Source of Ellagic Acid Recovered by Aqueous Ultrasound-Assisted Extraction

Jua (juá in Portuguese) is an underexplored fruit from Brazil’s northeast. This fruit is rich in antioxidant substances. However, there is a dearth of information about jua’s bioactive potential. The present study evaluated two extraction methods (continuous agitation and ultrasound-assisted extraction—UAE) and employed three different solvents (water, ethanol, and acetone) to efficiently recover soluble phenolic compounds. Aqueous extracts obtained by UAE showed the highest total phenolic content (TPC) and antiradical activity. Besides being an eco-friendly procedure, extraction and/or solubility in an aqueous medium is also important for food application. Ellagic acids were the predominant phenolics (80%) found in aqueous jua pulp extract obtained by UAE, as determined by HPLC, while its TPC was 405.8 gallic acid equivalent per gram of fruit. This extract also exhibited a higher scavenging activity towards peroxyl radicals when compared to that of several other fruits from the literature, including grape, strawberry, cranberry, and walnuts, which are known references in terms of antioxidants. This is the first report that demonstrates jua pulp’s potential as an alternative source of ellagic acid and other phenolic acids and flavonoids. Therefore, the outcome of this study provides new information that can be useful for functional food and nutraceutical industries.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.     

On the superfield effective potential in three dimensions

We develop the superfield approach to the effective potential in three dimensions and calculate the one-loop and two-loop Kählerian effective potential in commutative and noncommutative cases.     

The Influence of Hydrogen Loading Temperature on the Mechanical Strength of Optical Fibers

The influence of hydrogen loading temperature on the mechanical strength of optical fibers is investigated. Fibers subjected to high-pressure hydrogen loading at different temperatures were submitted to bend tests, and the results compared with those for pristine fibers. The Weibull probability distribution function was used to analyze the data of the mechanical bending strength of the fibers. Fiber strength is reduced by the presence of hydrogen, and this decrease is greater for higher hydrogen loading temperatures. The mechanical properties of the polymers used to coat fibers are affected by the hydrogen loading process and also by the increase in temperature. However, there is no evidence of cracks formation that might allow water to penetrate to the surface of the glass. Observation using scanning electron microscopy revealed that the morphology of fractures in nonhydrogen-loaded fibers have distinct fracture characteristics to that of fibers that are hydrogen loaded at 90°C and 120°C.