Stereospecific and asymmetric polymerization of 1-phenyldibenzosuberyl methacrylate with radical and anionic initiators

Stereospecific and asymmetric (helix-sense-selective) polymerization of 1-phenyldibenzosuberyl methacrylate (PDBSMA) was performed with radical and anionic initiators. A highly isotactic polymer having triad isotacticity greater than 97% was obtained by radical polymerization with (i-PrOCOO)₂ at 40°C. The radical polymerization of PDBSMA in (+)- and (-)-menthol gave (-)-and (+)-polymers, respectively, whose optical activity is ascribed to the prevailing one-handed helical conformation of a polymer chain. The radical copolymerization of PDBSMA with a small amount of an optically active monomer, (+)-phenyl-2-pyridyl-o-tolylmethyl methacrylate, afforded an optically active copolymer with the prevailing one-handed helical structure of PDBSMA sequences. Asymmetric anionic polymerization of PDBSMA was carried out with the complex of N, N′-diphenylethylenediamine monolithium amide and a chiral ligand, (+)-1-(2-pyrrolidinylmethyl)pyrrolidine in toluene at −78°C. The obtained polymer was highly isotactic and optically active due to nearly 100% one-handed helical structure.     

Quantitative visualization of micro-tube flow using micro-PIV

This paper describes PIV measurements ofthe flow field in a micro round tube with an internal diameter of 100 μm in order to examine micro-scale effects. Since the refractive index of the micro tube almost corresponds to that of water, the inner flow in the tube can be observed clearly. The micro PIV system has been developed using a microscope, a high sensitive CCD camera, a double pulsed Nd:YAG laser and optics. Applying the micro PIV technique to the flow, the velocity distributions with spatial resolution of 1.8 × 1.8 μm were measured even near the wall in the center plane of the round tube. It was found that the velocities near the tube wall were smaller than the theoretical values calculated by using Poiseuille’s law. It is believed that this disparity is due to micro-scale effects such as interference between particles and the wall, friction at the wall, surface tension and so on.     

Estimating the amplitude of measurement noise present in chaotic time series

We propose a method for estimating the amplitude of measurement noise present in chaotic time series. This method is based on the evaluation of initial errors for a given time series and for a new one synthesized by adding an adequate amount of noise to the given one. The method is valid over a much wider range of noise levels than the previous methods are because it is not based on the detail of dynamical structure which generates the data. In addition, it is possible to check if the method is valid for the given data prior to its application. To confirm the effectiveness of the method we show the results of numerical experiments and apply the method to chaotic data obtained from an electrochemical experiment. (c) 1999 American Institute of Physics.     

Effective Application of Microwave Resonant Cavity System to Flow Chemistry

By applying advanced telecommunication solid state devices to microwave (MW) resonant cavity system for flow chemistry, it becomes possible to heat up low polarity solvents higher than 250 C, that are considered impossible to heat up by MW until now. The resonant cavity system is opening new process windows to production processes of specialty chemicals which require low cost, high yield and high productivity.     

Enrichment of Lithium,Potassium, Copper,and Uranium Isotopes by Electromigration in a Cation Exchange Membrane

The ion exchange membrane can be used as an effective medium of electromigration for the separation of isotopes by the following reasons.     

The spin dynamics in distorted kagome lattices: a comparative Raman study

Despite the conceptional importance of realizing spin liquids in solid states only few compounds are known. On the other hand the effect of lattice distortions and anisotropies on the magnetic exchange topology and the fluctuation spectrum is an interesting problem. We compare the excitation spectra of the two s = 1/2 kagome lattice compounds, volborthite and vesignieite, using Raman scattering. We demonstrate that even small modifications of the crystal structure may have a huge effect on the phonon spectrum and low-temperature properties.     

Sorption and pervaporation properties of crosslinked membranes of poly(ethylene oxide imide) segmented copolymer to aromatic/nonaromatic hydrocarbon mixtures

Poly(ethylene oxide imide) segmented copolymer (PEO‐PI) membranes were crosslinked by the chemical reaction between ethylene glycol diglycidyl ether and benzylalcohol groups of diamine moieties in polyimide segments at high temperatures. Sorption and diffusion of penetrants took place in poly(ethylene oxide) segment microdomains. Sorption and desorption behavior of pure vapors such as benzene (Bz), cyclohexane (Cx) and n‐hexane (Hx) was classified as the Fickian diffusion. Sorption isotherms of binary liquid mixtures could be represented by the Flory–Rehner model, but the model overpredicted the sorption amounts of Cx and Hx, leading to small predictions of sorption selectivity α_S for Bz/Cx and Bz/Hx systems. UNIFAC‐FV model fairly well predicted the sorption amounts of aromatic hydrocarbons, but significantly overestimated those of nonaromatic ones, leading to too small predictions of α_S. Pervaporation (PV) behavior of PEO‐PI membranes was governed by sorption behavior followed by membrane swelling. Diffusion coefficient weakly depended on the minimum cross section of a penetrant. The diffusivity selectivity α_D hardly depended on the feed composition and was about 1.4 and 0.75 for Bz/Cx and Bz/Hx, respectively. PV selectivity α_PV was larger for Bz/Hx than for Bz/Cx because of larger α_S. PEO‐PI membranes displayed high specific permeation flux Ql and reasonably high α_PV for aromatic/nonaromatic hydrocarbons; for example, Ql = 60 Kg μm/(m² h) and α_PV = 8 for a feed mixture containing Bz, Tol, Hx, n‐Ot and i‐Ot of 20 wt % at 353 K. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1800–1811, 2000     

Metal ions dramatically enhance the enantioselectivity for lipase-catalysed reactions in organic solvents

We propose a simple and a powerful method to enhance the enantioselectivity for lipase-catalysed transformations in organic solvents by an addition of metal ion-containing water to the reaction mixture. In this paper, various metal ions such as LiCl or MgCl2 are tested to improve the enantioselectivity for the model reactions. The enantioselectivities obtained are dramatically enhanced, the E values of which are about 100-fold as compared with the ordinary conditions without a metal ion, for example, E = 200 by addition of LiCl. Furthermore, lowering the reaction temperature led to an almost perfect enantioselectivity of lipase in the presence of a metal ion, for example, E = 1,300 by addition of LiCl. Also, a mechanism for the drastic enhancement by metal ions is discussed briefly on the basis of the EPR spectroscopic study and the initial rate for each enantiomer of the substrate.