Palladium-catalyzed stereospecific 1,4-hydrogen migration of cis-cyclohex-2-en-1,4-diol systems

It has been revealed that the generation of 2-cyclohexenones from cis-1,4-dihydroxycyclohexene derivatives under PdCl₂(PPh₃)₂-HCO₂NH₄ system takes place in an intramolecular pathway involving unprecedented mode of suprafacial 1,4-hydrogen migration across the 1,4-allylic centers.     

Stereoselective Synthesis and Retentive Trapping of α‐Chiral Secondary Alkyllithiums Leading to Stereodefined α,β‐Dimethyl Carboxylic Esters

The treatment of α‐chiral secondary alkyl iodides with tBuLi at ?100 °C leads to the corresponding secondary alkyllithiums with high retention of configuration. Subsequent quenching with various electrophiles such as Bu₂S₂, DMF, MeOB(OR)₂, or Et₂CO provides the desired products with retention of configuration. Furthermore, a transmetalation with CuBr?P(OEt)₃ also allows retentive trapping with acid chlorides and ethylene oxide. The quenching of the resulting alkyllithiums with ClCO₂Et furnishes stereoselectively syn‐ and anti‐ethyl‐2,3‐dimethyl ester carboxylates (d.r.>94 %). Related esters bearing three adjacent stereo‐controlled centers (stereotriads) have also been prepared. This method has been applied to the synthesis of the ant pheromone (±)‐lasiol in 26 % overall yield (four steps) with d.r.=97:3 starting from commercially available cis‐2,3‐epoxybutane.     

Generation of a different type of beta-kallikrein from porcine pancreatic alpha-kallikrein by the action of chymotrypsin--observation of proteolytic processing occurring around "kallikrein autolysis loop" region

The generation of a different type of beta-kallikrein, designated C beta-kallikrein, from alpha-kallikrein by chymotryptic action was ascertained by the following observations: 1) When alpha-kallikrein was incubated with chymotrypsin, an increase of esterolytic activity of kallikrein was observed. 2) In sodium dodecyl sulfate polyacrylamide gel electrophoresis, C beta-kallikrein was found to be different from the beta-kallikrein obtained from alpha-kallikrein by tryptic digestion, and was designated T beta-kallikrein. 3) N-Terminal amino acid sequence analyses of internal light and heavy chains of C beta-kallikrein indicated that N-termini of the light and the heavy chains were isoleucine and lysine, respectively, and that the heavy chain had most of the "kallikrein autolysis loop" sequence in its N-terminal end. In the case of T beta-kallikrein, N-termini of the light and the heavy chains were isoleucine and alanine, respectively, and the light chain retained the "kallikrein autolysis loop" region in its C-terminal end. These observations demonstrated that C beta-kallikrein was different from the beta-kallikrein prepared from autolyzed pancreas, A beta-kallikrein, which had lost the "kallikrein autolysis loop" sequence. Structural differences of the above four kallikreins (alpha-, T beta-, C beta-, and A beta-) result in somewhat different enzyme properties. The kinetic constants for the hydrolysis of synthetic substrates (N alpha-benzoyl-L-arginine ethyl ester and N alpha-tosyl-L-arginine methyl ester) of these kallikreins differed from each other, and inhibitory profiles against alpha 1-antitrypsin were also different.(ABSTRACT TRUNCATED AT 250 WORDS)     

Sugarcane bagasse pulps

Organosolv (ethanol/water and acetosolv) pulps were treated with Bacillus pumilus xylanase for 4, 8, and 12 h and compared with commercial Cartazyme HS xylanase-treated pulps. Treatment of ethanol/water pulps with B. pumilus xylanase increased viscosity by 40% in 8 h of treatment compared with pulps treated without enzyme. However, acetosolv pulps treated with B. pumilus xylanase lost viscosity. Ethanol/water pulps treated with Cartazyme had a viscosity of 18.5 cP in 4 h of treatment. In the acetosolv pulps treated with commercial enzyme, the loss of viscosity was 20% compared with pulps treated without enzyme. Ethanol/water pulps treated with B. pumilus and Cartazyme had similar effects: a 44% reduction in kappa number for pulps treated with enzyme followed by alkaline extraction compared with pulps treated with alkaline extraction. In acetosolv pulps treated with B. pumilus, the kappa number was from 12 to 18, compared with pulps treated without enzyme, which had a 40% reduction in 4 and 12 h and a 60% reduction in 8 h. Cartazyme-treated acetosolv pulps had a kappa number of 14 in 4 and 8 h of treatment. For 12 h of treatment, the kappa number was 8. Fourier transform infrared spectra of the pulps showed that enzyme-treated pulps had changes in the 1000 cm^?1 absorption owing to a C-O bond present in esters. Using principal component analysis, it is possible to differentiate the unbleached pulps and enzyme-treated pulps.     

Enzymatic bleaching of organosolv sugarcane bagasse pulps with recombinant xylanase of the fungus Humicola grisea and with commercial cartazyme HS xylanase

Organosolv (ethanol/water and acetosolv) pulps were treated with Humicola grisea var. thermoidea and compared with Cartazyme HS xylanase-treated pulp. The ethanol/water pulps treated with H. grisea had the same viscosity as unbleached pulps (8 cP). Ethanol/water pulps treated with Cartazyme had higher viscosity than H. grisea-treated pulps (12 cP). Acetosolv pulps treated with H. grisea and Cartazyme presented a reduction in viscosity; however, the pulps treated with H. grisea had a lower reduction in viscosity than Cartazyme-treated pulps. Ethanol/water pulps treated with H. grisea had a 23% reduction in kappa number in 4 and 8 h of treatment, compared with the unbleached pulps. Cartazyme-treated pulps had a kappa number similar to that of the control pulps for 4 h of treatment. Extending the treatment time to 12 h resulted in a reduction of 33%. The acetosolv pulp treated with H. grisea had a kappa number reduced to 23% in 4 h. Cartazyme treatment resulted in a reduction of 55 and 44% in kappa number for 4 and 8 h of treatment, respectively, when compared with control pulp. Extending the treatment time to 12 h decreased the kappa number 72%. Fourier transform infrared spectra and principal component analysis showed differences among unbleached, H. grisea-treated, and Cartazyme-treated pulps.     

Fusel oil as precursor for aroma generation by biotransformation using lipase

The feasibility of using mixtures of C4 and C5 chain-length aliphatic alcohols from fusel oil as the bulk organic media for lipase-mediated synthesis of laurate esters was assessed. Reaction mixtures consisted of lauric acid, lipase, solvent (if added), and appropriate amount of fusel oil (previously dehydrated with inorganic salts and molecular sieves). The influence of the reaction conditions such as substrate concentrations and temperature were investigated. Increased molar ratio of acyl donor to acyl acceptor allowed the esterification to proceed with no need for solvent addition.     

PVTx relationships and solid-liquid equilibria for the m-xylene-p-xylene system under high pressures

PVTx relationships of the m-xylene-p-xylene system have been measured with a glass piezometer at 283.15 and 298.15 K and pressures up to 200 MPa, or up to the point of solidification of m-xylene where this occurred at a lower pressure. Freezing pressures of m-xylene were observed as a discontinuity in the volume at increasing pressure. Approximate solid-liquid equilibria under high pressures were obtained from the freezing pressure measurement. The Carnahan-Starling-van der Waals (CS-vdW) equation of state was used to correlate the PVTx data. The solid-liquid equilibria under high pressures were calculated with the CS-vdW equation of state for the liquid phase and a simple equation of state for the solid phase. In order to test the validity of the calculation method, the solid-liquid equilibrium relationships of the benzene-cyclohexane system were also calculated. It was found that the solid molar volume should be treated as a function of temperature and/or pressure to fit the experimental data.     

Dansylation of Streptomyces subtilisin inhibitor: spectrometric analysis of the fluorescence-labeled inhibitor

Specific labeling of tyrosine residues of Streptomyces subtilisin inhibitor (SSI) was carried out by dansyl chloride. Analysis revealed that two tyrosine residues out of three in SSI were modified. The resulting fluorescent SSI was fully active as a subtilisin inhibitor. Fluorescence spectra of the modified SSI were investigated. Efficiency of energy transfer from intrinsic tryptophan residues of SSI to the introduced dansyl residue was found to be influenced by the complex formation of SSI with subtilisin.