A mild conversion of phenylpropropnoid into rare phenylbutanoids: (E)-4-(2,4,5-trimethoxyphenyl)but-1,3-diene and (E)-4-(2,4,5-trimethozypheny)but-1-ene occuring in Zingiber cassumunar

(E)-4-(2',4',5'-trimethoxyphenyl)but-1,3-diene (4) and (E)-4-(2',4',5'-trimethoxyphenyl)but-1-ene (6), bioactive phenylbutanoids of Zingiber cassumunar, were synthesized exclusively with trans geometry. Treatment of methylmagnesium iodide with (E)-2',4',5'-trimethoxycinnamaldehyde (2), an oxidized product of abundantly available toxic (Z)-phenylpropanoid (1) of Acorus calamus, gave (E)-4-(2',4',5'-trimethoxyphenyl)but-3-en-2-ol (3) which upon dehydration with copper sulphate/silica gel under microwave irradiation for 3 min afforded 4 in 58% yield. Further, catalytic hydrogenation of 4 with 10% Pd/C afforded 4-(2',4',5'-trimethoxyphenyl)butane (5) which upon dehydrogenation with DDQ/SiO2 afforded hypolipidemic 6 in 54% yield.     

Effect of environmental factors and carbohydrate on gellan gum production

Submerged culture fermentation studies were carried out in batch mode for optimizing the environmental parameters and carbon source requirement by Pseudomonas elodea for the production of gellan gum. The maximum production of gellan gum was obtained with 16-h-old culture and 8% inoculum at 30°C and pH 7.0 after 52 h of incubation (6.0 g/L). Of the various carbon sources tested, 2% sucrose, glucose, and soluble starch yielded considerably high amounts of gellan. Studies on the concentration of various carbohydrates on gellan gum production indicated that the optimum concentration of glucose and starch was 3%, whereas for sucrose it was 4%. The addition of glucose in the medium above 3% had a detrimental effect on gellan yield. The investigation of intermediate two-step addition of glucose under identical conditions of fermentation showed an enhanced production of gellan (8.12 g/L) as compared with the control (6.0 g/L). To optimize the recovery of gellan from fermented broth, different solvents were tested for precipitation of gellan gum. Among the various solvents tested, tetrahydrofuran gave better recovery of gellan (82%) as compared with the conventional solvent isopropanol (49%).     

Study of Densities, Viscosities and Ultrasonic Speeds of Binary Mixtures Containing 1,2-Dimethoxyethane and an Alkan-l-ol at 298.15 K

The viscosity deviation (Δη), the excess molar volume (V ^E) and the ultrasonic speed (u) have been investigated from viscosity (η) and density (ρ ) measurements of binary liquid mixtures of 1,2-dimethyoxyethane with methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol or octan-1-ol over the entire range of composition at 298.15 K. The excess volumes are negative over the entire range of composition for all of the mixtures with the exception of hexan-1-ol and octan-1-ol. The excess isentropic compressibilities (K _S ^E) and viscosity deviations are negative for all of the mixtures. The magnitudes of the negative values of V ^E decrease with the number of carbon atoms of the alkan-1-ol. The trend of increasing K _S ^E values with the chain length of the alkanol is similar to that observed in the case of V ^E. Graphs of V ^E, Δ η, K _S ^E, Δ u, L _f ^E and Z ^E against composition are presented as a basis for a qualitative discussion of the results.     

The microwave spectrum and structure of trifluoro-ethylene

The microwave spectrum of trifluoroethylene F₂C=CHF is reported, and a number of ground state and vibrationally excited state lines are assigned. The ground state rotational constants are: 10665.31, 3872.36, 2837.97 MHz. The dipole components are μ_a = 0.075 D, μ_b = 1.30 D, and μ_total = 1.30 D. Calculations of the inertia defect of the ground and excited states indicate that the equilibrium configuration is planar.     

Polymerization of methyl methacrylate using isatoic anhydride–bromine donor–acceptor complex as the photoinitiator

Isatoic anhydride (IA) alone did not initiate photopolymerization of methyl metacrylate (MMA) at 40°C when exposed to visible light for about 180 min. But IA, when used in combination with bromine (Br₂) as the initiator, initiated the photopolymerization of MMA readily under the same conditions. This behavior was explained by the formation of a donor-acceptor type of complex between IA and Br₂ in the presence of MMA. The polymerization was found to proceed via a free radical mechanism and the radical generation process was considered to follow an initial complexation reaction between the initiator components and monomer. The complex initiator showed nonideal kinetics for the present system (initiator exponent < 0.5) and was analyzed. The monomer exponents varied from 0.83 to 1.15 normally depending on the nature of solvent used. Initiator-dependent chain termination was significant as well as the bimolecular mode of chain termination. © 1993 John Wiley & Sons, Inc.     

Kinetics of oxidation of ethyldigol by vanadium(V) in aqueous acidic medium

The kinetics of oxidation of ethyldigol by vanadium(V) in aqueous acidic medium has been carried out. The reaction is first order with respect to vanadium(V) and the substrate and is acid catalysed.Hammett acidity function (H ₀) andBunnett hypothesis have been applied. The formation of free radicals during the course of the reaction has been indicated. A probable reaction mechanism is proposed.

---

Die Kinetik der Oxidation von Ethyldigol mit Vanadium(V) in wäßrigem saurem Medium

Zusammenfassung Es wurde die Kinetik der Oxidation von Ethyldigol mittels Vanadium(V) in wäßriger saurer Lösung untersucht. Die Reaktion ist erster Ordnung bezüglich Vanadium(V) und Substrat und ist säurekatalysiert. Es wurden dieHammett-Aciditätsfunktion (H ₀) und dieBunnett-Hypothese angewandt. Die Bildung von freien Radikalen während der Reaktion konnte bestätigt werden. Es wird ein Reaktionsmechanismus vorgeschlagen.

     

Studies in inorganic polyelectrolytes — Part II

Viscosity behaviour of several samples ofGraham's salt with varying molecular weight has been studied. Reduced viscosity (η _sp /c) versus concentration curves were found to be characteristic of polyelectrolytes. They are dependent on the molecular weight and can be reduced to straight lines by plotting the reciprocal of the reduced viscosity against the square root of concentration. The intrinsic viscosities obtained by extrapolation were found to be proportional to the square of molecular weights. The value of reduced viscosity at any particular concentration in the concentration range between 0.25% and 4.0% was linearly related to the molecular weight. Reduced viscosities were found to decrease considerably on addition of electrolytes. Reduced viscosity versus added salt concentration curves were remarkably molecular weight dependent. The p_H of the medium seemed to have no effect at all. Bivalent salts reduce the viscosity to a much greater extent than monovalent ones. By keeping the concentration of the added salt constant and varying that ofGraham's salt, curves showing hump which disappeared at higher concentration of the added salt, were obtained. In the action of electrolytes the more important factor is the valency of cation rather than the ionic strength of the medium. Most observations confirm the already well-establishedFolding-Chain Theory of polyelectrolytes developed byKatchalsky, Fuoss and others.     

High-performance thin layer chromatography method for quantitative determination of four major anthraquinone derivatives in Rheum emodi

A high-performance thin layer chromatographic (HPTLC) method for the rapid and simple quantification of the four major anthraquinone derivatives i.e. physcion, chrysophanol, emodin and chrysophanol glycoside in Rheum emodi is described. HPTLC of anthraquinone derivatives was performed on pre-coated RP-18 F254S HPTLC plates. For achieving good separation, the mobile phase of methanol-water-formic acid (80:19:1, v/v/v) was used. The densitometric determination of anthraquinone derivatives was carried out at 445 nm in reflection/absorption mode. The calibration curves were linear in the range of 20-100 ng for physcion, 80-400 ng for chrysophanol and emodin, and 200-1000 ng for chrysophanol glycoside. The method was found to be reproducible and convenient for quantitative analysis of anthraquinone derivatives in the methanolic extract of rhizomes of R. emodi collected from three different locations of Western Himalaya, India.     

Proteome analysis in the bovine adrenal medulla using liquid chromatography with tandem mass spectrometry

Liquid chromatography/mass spectrometry (LC/MS)-based proteomics has been used to identify soluble proteins in the bovine adrenal medulla. This gland is a major source of hormones, opioids, neurotransmitters, and several vital proteins. The adrenal medulla proteins were first purified using ammonium sulfate precipitation. The resulting proteins were then pre-fractionated with a C-4 high-performance liquid chromatography (HPLC) column. Each 2-min HPLC fraction was digested with trypsin, and separated further and analyzed using capillary liquid chromatography/tandem mass spectrometry (capLC/nanospray-MS/MS) to map the proteome of the adrenal medulla. The parent mass and sequence ion information thus obtained for tryptic peptides was used to search the NCBInr database using the SEQUEST search engine. A total of 195 proteins were identified, of which 71 had good scores (delta correlation value greater than 0.1, preliminary score above 200, and cross-correlation value above 2.5). The prominent proteins thus identified are secretogranin I precursor, chromogranin A, proenkephalin A precursor, myosin X, hemoglobin beta chain, hemoglobin alpha chain, heat shock protein 10 kDa, and replicase.