Preparation of NiFe2O4 nanopowder via EDTA precursor and study of its properties

An ethylene diamine tetra acetic acid (EDTA) precursor-based chemical method is reported for preparing single-phase nickel ferrite (NiFe₂O₄) nanopowder. The synthesized powder was characterized by thermogravimetric analysis, differential scanning calorimetric analysis, X-ray diffraction, particle size analysis and scanning electron microscopy. DC electrical resistivity and magnetic property of the synthesized NiFe₂O₄ were measured by using a two-probe method and a vibrating sample magnetometer respectively. The DC resistivity behaviour of the NiFe₂O₄ nanopowder was correlated with the change of microstructure, during sintering. This EDTA precursor-based method is capable of producing nanostructured single-phase NiFe₂O₄ powder at a comparatively low calcination temperature and offers the potential of a simple and cost-effective route, including the preparation of other ferrite nanoparticles.     

Selective oxidation of ethylbenzene to acetophenone over Cr(III) Schiff base complex intercalated into layered double hydroxide

A new heterogeneous catalyst, Cr(III) Schiff base‐containing layered double hydroxide, was synthesized using the intercalation method. The Cr(III) Schiff base complex derived from 2‐hydroxy‐1‐naphthaldehyde and 4‐aminobenzoic acid was intercalated into the layered double hydroxide. The synthesized materials were characterized using inductively coupled plasma atomic emission spectrometry, energy‐dispersive X‐ray analysis, scanning electron microscopy, X‐ray diffraction, Brunauer–Emmett–Teller surface area measurement, Fourier transform infrared spectroscopy, thermogravimetric analysis, diffuse reflectance UV–visible spectroscopy and electron paramagnetic resonance spectroscopy. The catalytic activity was investigated for the oxidation of ethylbenzene with tert‐butylhydroperoxide as an oxidant under solvent‐free conditions as well as with lower chromium concentrations. In the oxidation reaction, ethylbenzene was oxidized to acetophenone and benzaldehyde. The catalyst was recycled ten times without significant loss of catalytic activity. Leaching studies performed with hot filtration experiments showed that the chromium catalyst was heterogeneous in nature and stable under the reaction conditions.     

Nonlinear transient dynamic response of damped plates using a higher order shear deformation theory

Damped transient dynamic elasto-plastic analysis of plate is investigated. A finite element model based on a C ⁰ higher order shear deformation theory has been developed. Nine noded Lagrangian elements with five degrees of freedom per node are used. Selective Gauss integration is used to evaluate energy terms so as to avoid shear locking and spurious mechanisms. Von Mises and Tresca yield criteria are incorporated along with associated flow rules. Explicit central difference time stepping scheme is employed to integrate temporal equations. The mass matrix is diagonalized by using the efficient proportional mass lumping scheme. A program is developed for damped transient dynamic finite element analysis of elasto-plastic plate. Several numerical examples are studied to unfold different facets of damping of elasto-plastic plates.     

Optimized AC conductivity correlated to structure,morphology and thermal properties of PVDF/PVA/Nafion composites

Polyvinylidene fluoride (PVDF) and polyvinyl alcohol (PVA) composites were prepared by controlled loading of Nafion (5 to 15 wt%) by solution casting using water and dimethylformamide (DMF) as a solvent. The surface morphology of composite analyzed by atomic force microscopy (AFM) reveals the presence of Nafion ionomers. The increase in interlayer spacing of modified PVDF/PVA polymer system as a function of Nafion was detected by X-ray diffraction (XRD). The major change in Fourier transform infrared (FTIR) spectroscopy confirms the chemical bond C=O stretching around 1,700 cm^?1 due to Nafion. Differential scanning calorimetry (DSC) demonstrates the thermal stability of polymer composites and the decrease in melting temperature (T _m). The optimized AC conductivity (σ) of the prepared composite was evaluated by using an impedance analyzer as a function of temperature (40 to 150 °C) at constant 30-MHz frequency. The highest conductivity of 1.3?×?10^?2 S m^?1 was observed at 80 °C for 10 wt% of Nafion and correlated with structure, morphology and thermal properties of modified PVDF/PVA/Nafion composites. The experimental results may be useful for sensors, fuel cells and battery application domains.     

Design,Synthesis, Antitubercular and Antibacterial Activities of 1,3,5-Triazinyl Carboxamide Derivatives and In Silico Docking Studies

Russian Journal of General Chemistry - A series of novel N-{2-fluoro-6-[(4,6-dimethoxy-1,3,5-triazin-2-yl)methyl]phenyl} carboxamide derivatives has been synthesized, and their molecular structures...     

Laser synthesis of palladium-alumina composite membranes for production of high purity hydrogen from gasification

This paper describes a special method of laser-based deposition to synthesize palladium-ceramic composite membranes. Thin film Pd was deposited on a ceramic substrate by Nd-YAG laser irradiation of coating precursor PdCl₂ on γ-alumina substrate. The parameters of the laser processing technique were optimized to synthesize metal-ceramic composite membranes. The physical and chemical characteristics of Pd coated γ-alumina membranes were studied and compared with various other alumina membranes referenced in the literature. Hydrogen permeation experiments were performed in a CO + CO₂ + CH₄ + H₂ environment under typical catalytic steam gasifier exit conditions. The Pd-ceramic composite showed good mechanical and thermal stability and resulted in a hydrogen permeability flux of about 0.061 mol/m² s. The activation energy of the Pd membrane was found to be 5.39 kJ/mol in a temperature range of 900-1300 °F.     

Friedel sum rule in the second born approximation

The condition on the impurity potential is derived using the second Born approximation for the phase shift occurring in the Friedel sum rule. The result distinguishes between the donor-and acceptor-type scattering centers.     

Temperature dependent exchange narrowing of line width in EPR on interacting donors in germanium and silicon

An expression has been derived for the temperature dependent exchange integral for a pair of interacting shallow donors substituted in a dielectric material. This has been achieved by taking into account the phonon induced mixing of excited orbital states with the ground orbital states of the impurity centres. The results have been used to explain the temperature narrowing of the EPR line width observed by some workers in phosphorus doped germanium at low temperatures. Good agreement between theory and experimental results seems to favour the proposed mechanism in preference to one of motional narrowing due to hopping.