Selective growth of ag nanowires on Si(111) surfaces by electroless deposition

Electroless deposition of Ag on atomically flat H-terminated Si(111) surfaces in aqueous alkaline solutions containing Ag ions produced two different sizes of Ag nanowires along atomic step edges: (1) a narrow nanowire of 10 nm in width and 0.5 nm in height and (2) a wide nanowire of 35 nm in width and 11 nm in height. The narrow and wide nanowires were formed by immersion in the solutions containing less than 1 ppb and 8 ppm dissolved-oxygen concentrations, respectively. This result indicates that the dissolved oxygen initiates the formation of Ag nucleation sites and that the fabrication method has a possibility of controlling the size of Ag nanowires.     

Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.     

Unexpected formation of benziphthalocyanine dimer: An easily synthesizable dimer of phthalocyanine analogue

Methylene-bridged benziphthalocyanine dimer 2 was unexpectedly generated by the reaction of dihydroxybenziphthalocyanine 1 and formaldehyde in the presence of a catalytic amount of a base at room temperature. Single-crystal X-ray diffraction analysis of 2 revealed a V-shaped structure. Dimer 2 exhibited longer-wavelength absorption and fluorescence bands than monomer 1 in the near-IR region.     

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm

Peptides attached to a cysteine hydrazide ‘transporter module’ are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as ‘forward’) in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse (‘backward’) direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by ¹H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Peptides are transported in either direction between chemically similar sites on a molecular platform, substrate repositioning is achieved using a cysteine hydrazide transporter module and a small-molecule robotic arm controlled by a rotary switch.     

Synthesis and magnetic properties of ALnO2 (A=Cu or Ag; Ln=rare earths) with the delafossite structure

Synthesis, structures, and magnetic properties of ternary rare earth oxides ALnO₂ (A=Cu or Ag; Ln=rare earths) have been investigated. CuLnO₂ (Ln=La, Pr, Nd, Sm, Eu) were synthesized by the direct solid state reaction of Cu₂O and Ln₂O₃, and AgLnO₂ (Ln=Tm, Yb, Lu) were obtained by the cation-exchange reaction of NaLnO₂ and AgNO₃ in a KNO₃ flux. These compounds crystallized in the delafossite-type structure with the rhombohedral 3R type (space group: R-3m). Magnetic susceptibility measurements showed that these compounds are paramagnetic down to 1.8 K. Specific heat measurements down to 0.4 K indicated that CuNdO₂ ordered antiferromagnetically at 0.8 K.     

Frequency dependence of acoustic properties of aqueous glucose solutions in the VHF/UHF range

The bioultrasonic spectroscopy system was employed for measurements of velocity and attenuation coefficient of glucose solutions in the VHF/UHF range. The relation between the slope of the square of velocity and the relaxation parameters, and the relation between the frequency exponent on attenuation coefficient and the relaxation parameters are investigated. In order to carry out numerical calculations, a model for a single relaxation process is employed, wherein the attenuation coefficient is expressed as (A/( 1 + (f/falpha)2) + B)f2 where falpha is the attenuation relaxation frequency, and A and B are constants. The numerical calculations show that the slope of the square of the velocity is determined uniquely by the velocity relaxation frequency fv and v(infinity)2 - v(0)2 where v0 is the zero-frequency velocity and v(infinity) is the infinite-frequency velocity, and that the frequency exponent on the attenuation coefficient is determined uniquely by falpha and A/B. For experimental considerations, the velocities and the attenuation coefficients of 5, 15, and 25% concentration aqueous solutions of glucose were measured in the frequency range 20 to 700 MHz. The data for the 5 and 15% aqueous solutions can be explained using the single relaxation model. However, the data for the 25% aqueous solution suggest the existence of multirelaxation processes.     

Delayed feedback control based on the act-and-wait concept

This paper proposes a delayed feedback control (DFC) based on the act-and-wait concept, which reduces the dynamics of DFC systems to that of discrete-time systems. Based on this concept, a delayed feedback controller is designed for a prototype two-dimensional oscillator using a simple systematic procedure. This control has two advantages: the feedback delay time can be large and it can obtain deadbeat behavior. A numerical example using a double-scroll circuit model demonstrates these theoretical results.     

Catalytic asymmetric synthesis of descurainin via 1,3-dipolar cycloaddition of a carbonyl ylide using Rh2(R-TCPTTL)4

A catalytic asymmetric synthesis of descurainin has been achieved by incorporating an enantioselective 1,3-dipolar cycloaddition, a stereoselective alkene hydrogenation, an oxidation with Fremy’s salt and a regioselective demethylation with NbCl₅ as the key step. The 1,3-dipolar cycloaddition of a carbonyl ylide derived from tert-butyl 2-diazo-5-formyl-3-oxopetanoate with 4-hydroxy-3-methoxyphenylacetylene in the presence of dirhodium(II) tetrakis[N-tetrachlorophthaloyl-(R)-tert-leucinate], Rh₂(R-TCPTTL)₄, provided an 8-oxabicyclo[3.2.1]octane skeleton in 95% ee.     

Convenient indole synthesis from 2-iodoanilines and terminal alkynes by the sequential Sonogashira reaction and the cyclization reaction promoted by tetrabutylammonium fluoride (TBAF)

The sequential Sonogashira reaction and the cyclization reaction of various 2-iodoanilines and terminal alkynes in the presence of a palladium catalyst and tetrabutylammonium fluoride (TBAF) gave the corresponding 2-substituted indoles in good yields.