Enhanced performance of photorefractive poly(N‐vinyl carbazole) composites

We present the enhanced photorefractive performance of high molecular weight poly(N‐vinyl carbazole) (PVCz)‐based composites. Higher diffraction efficiency with faster speed of grating build‐up was obtained by optimizing the composition of the PVCz composites. At relatively low applied electric field of E = 45 V μm^?1, diffraction efficiency of 26% for p‐polarized probe beam and corresponding that of 5.1% for s‐polarized probe beam were measured with faster grating build‐up speed of 48.3 s^?1 for the composite with 2,4,7‐trinitrofluorenone (TNF) as a sensitizer. Fastest speed of grating build‐up of 100 s^?1 and large optical gain up to 110 cm^?1 were measured at E = 80 V μm^?1 for the composite with fullerene derivative of PCBM as a sensitizer. These improved performances are due to a large orientational enhancement effect with faster response speed in addition to Pockels effect for the samples with appropriate glass transition temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and properties of 1,1′-bis(diacetylene-group) connected ferrocene-thiophene derivative: a cooperatively functional behavior of diacetylene-group connected constituents

An extended π-electronic conjugation system of 1,1′-bis(diacetylene-group) connected ferrocene-thiophene derivative has been synthesized, with our integrated reaction between the corresponding TMS-protected acetylenes in one-pot. Its electronic properties have been examined, suggesting a cooperatively functional behavior of the diacetylene-group connected constituents.     

Elongation of phenoxide C-O bonds due to formation of multifold hydrogen bonds: statistical, experimental, and theoretical studies

Statistical studies using the Cambridge Structural Database have revealed that there are several elongated phenoxide C-O bonds. They are characterized by the formation of 3-fold (or occasionally 2-fold) hydrogen bonds to the phenoxide oxygen atoms, and their mean bond length extends up to 1.320 ?, which is quite different from the theoretically predicted carbon-oxygen bond length of C(6)H(5)O(-) (1.26 ?). Elongated phenoxide C-O bonds associated with the formation of 3-fold hydrogen bonds were also observed in the X-ray structures of proton-transfer complexes (2X-O(-))(TEAH(+))s derived from 5'-X-substituted 5,5'-dimethyl-1,1':3',1'-terphenyl-2,2',2'-triols (2X-OHs, where X = NO(2), CN, COOCH(3), Cl, F, H, and CH(3)) and triethylamine (TEA). By comparing the X-ray structures, C-O bond elongation was found to be only slightly affected by an electron-withdrawing substituent at the para position (X). This along with strong bathochromic shifts of N-H(···O(-)) and O-H(···O(-)) stretching vibrations in the IR spectra indicates that the elongated C-O bonds in (2X-O(-))(TEAH(+))s essentially have single-bond character. This is further confirmed by molecular orbital calculations on a model complex, showing that the negatively charged phenoxide oxygen atom is no longer conjugated to the central benzene ring, and the NICS values of the three benzene rings are virtually identical. However, C-O bond elongation in (2X-O(-))(TEAH(+))s was considerably influenced by a change in the hydrogen-bond geometry. This also suggests that hydrogen bonds significantly affect phenoxide C-O bond elongation.     

A study on thermal degradation of LiF:Mg,Cu,P and LiF:Mg,Cu,Si

We investigated the thermal degradation of LiF:Mg,Cu,P (NTL-250) and LiF:Mg,Cu,Si (MCS) for the development of TL sheet. By thermogravimetry and differential scanning calorimetry (TG-DSC), the exothermic reaction was observed between 320 °C and 400 °C in MCS as well as NTL-250. The heat value of MCS was twice as large as that of NTL-250. This ratio corresponded with that of Mg amount in these TL materials measured by ICP-OES (inductively-coupled plasma optical emission spectrometry). X-ray diffraction (XRD) measurements were also carried out, and the peaks of MgF₂ phase were also observed in degraded MCS sample as well as NTL-250. Moreover, X-ray absorption near-edge structures (XANES) of Cu in these LiF TLDs were measured. The valences of Cu did not change before and after degradation. It indicates that the thermal degradation is caused by not Cu but Mg ion state change. The exothermic reaction is possible caused by the stabilization reactions, and then it was expected to correspond with MgF₂ precipitation. From these results, we concluded that the thermal degradations of these LiF TLDs are caused by the precipitation of MgF₂.     

Indirectly illuminated X-ray area detector for X-ray photon correlation spectroscopy

An indirectly illuminated X-ray area detector is employed for X-ray photon correlation spectroscopy (XPCS). The detector consists of a phosphor screen, an image intensifier (microchannel plate), a coupling lens and either a CCD or CMOS image sensor. By changing the gain of the image intensifier, both photon-counting and integrating measurements can be performed. Speckle patterns with a high signal-to-noise ratio can be observed in a single shot in the integrating mode, while XPCS measurement can be performed with much fewer photons in the photon-counting mode. By switching the image sensor, various combinations of frame rate, dynamic range and active area can be obtained. By virtue of these characteristics, this detector can be used for XPCS measurements of various types of samples that show slow or fast dynamics, a high or low scattering intensity, and a wide or narrow range of scattering angles.     

Reversible 1,3‐dipolar cycloaddition of dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate with dimethyl acetylenedicarboxylate

It was shown that dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate ( 2 ) and dimethyl acetylenedicarboxylate (DMAD) undergo a 1,3‐dipolar cycloaddition to produce a short‐lived ylide intermediate ( 3 ). The 1,3‐dipolar cycloaddition took place even at room temperature, although sluggishly, but took place much more rapidly under application of a high pressure of 500 MPa. The 1,3‐dipolar cycloaddition is reversible and the ylide 3 immediately splits into 2 and DMAD. When the reaction of 2 with DMAD was carried out at room temperature without solvent, a spiro‐1,3‐dithiole ( 11 ) was formed in 11% yield, whereas the reaction at 150°C provided a thiophene derivative ( 13 ) in 41% yield. It was found that 11 undergoes a thermal rearrangement to 13 . Results of attempted chemical trapping of the ylide 3 are also reported. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:434–440, 2000     

Boundedness of bilinear pseudo-differential operators with BS0,0m$BS^{m}_{0,0}$ symbols on Sobolev spaces

In this paper, bilinear pseudo-differential operators with symbols in the bilinear Hörmander class $B{S}_{0,0}^m$ are considered. In particular, the boundedness of these operators on Sobolev spaces is established. Our main result is proved by using symbolic calculus and the boundedness of those operators with certain S_{0, 0}-type symbols on Lebesgue spaces.