Synthesis of Block Copolymers with a Pentasilane Core

We report a new method for the synthesis of block copolymers with a pentasilane core by the polymerization of alkyl methacrylate monomers using the pentasilyl dianion as an initiator. The polymerization proceeded with living features and yielded the corresponding block copolymers with controlled molecular weights. The amphiphilic block copolymer was obtained by the polymer reaction, and it formed sphere‐like aggregates in MeOH/H₂O solution.

     

Hypervalent iodine(III)/Et4NBr combination in water for green and racemization-free aqueous oxidation of alcohols

We have found that the use of the PhI(OAc)₂/Et₄N⁺Br⁻ combination in water can significantly enhance its oxidation ability and oxidize a wide range of alcohols 1 to carbonyl compounds 2 in good to excellent yields. This clean aqueous oxidation method shows no detectable racemization processes, and even an enolizable ketone 2m could be obtained in an optically pure form from the corresponding chiral alcohol 1m. Utilization of the recyclable reagent 3 as a more practical alternative to PhI(OAc)₂ is also successful in these reactions.     

Synthesis of optically active polymers using P-chiral bisphosphines as anionic initiators

Anionic polymerization of triphenylmethyl methacrylate was performed by using P-chiral bisphosphine initiators. According to the optical rotation analysis and circular dichroism measurements, the polymer obtained by using the initiator (S,S)-1,2-bis(boranato(tert-butyl)methylphosphino) ethane exhibited one-handed helical conformation induced by the chirality of phosphorus atoms in the polymer terminal. The enantiomer (R,R)-1,2-bis(boranato(tert-butyl)methylphosphino) ethane gave the opposite one-handed helical polymer. Optically active bisphosphine (S,S)-1,2-bis(boranatomethylphenylphosphino) ethane was employed for the helix-sense-selective polymerization of triphenylmethyl methacrylate in order to obtain the polymer with the same helix sense as the polymer obtained from the initiator (S,S)-1,2-ethane bis(t-butylm-ethylphosphineborane). Further, removal of the coordinated boranes and complexation with platinum(II) on the chiral phosphorus atoms were carried out in order to yield the corresponding polymer-platinum(II) complex without loss of its chiral higher-ordered structure.     

Cation-pi interaction in the polyolefin cyclization cascade uncovered by incorporating unnatural amino acids into the catalytic sites of squalene cyclase

It has been assumed that the pi-electrons of aromatic residues in the catalytic sites of triterpene cyclases stabilize the cationic intermediates formed during the polycyclization cascade of squalene or oxidosqualene, but no definitive experimental evidence has been given. To validate this cation-pi interaction, natural and unnatural aromatic amino acids were site-specifically incorporated into squalene-hopene cyclase (SHC) from Alicyclobacillus acidocaldarius and the kinetic data of the mutants were compared with that of the wild-type SHC. The catalytic sites of Phe365 and Phe605 were substituted with O-methyltyrosine, tyrosine, and tryptophan, which have higher cation-pi binding energies than phenylalanine. These replacements actually increased the SHC activity at low temperature, but decreased the activity at high temperature, as compared with the wild-type SHC. This decreased activity is due to the disorganization of the protein architecture caused by the introduction of the amino acids more bulky than phenylalanine. Then, mono-, di-, and trifluorophenylalanines were incorporated at positions 365 and 605; these amino acids reduce cation-pi binding energies but have van der Waals radii similar to that of phenylalanine. The activities of the SHC variants with fluorophenylalanines were found to be inversely proportional to the number of the fluorine atoms on the aromatic ring and clearly correlated with the cation-pi binding energies of the ring moiety. No serious structural alteration was observed for these variants even at high temperature. These results unambiguously show that the pi-electron density of residues 365 and 605 has a crucial role for the efficient polycyclization reaction by SHC. This is the first report to demonstrate experimentally the involvement of cation-pi interaction in triterpene biosynthesis.     

Intersite structural rearrangement of the blue copper site induced by substrate binding: spectroscopic studies of a copper-containing nitrite reductase from Alcaligenes xylosoxidans NCIMB 11015

A copper-containing nitrite reductase from Alcaligenes xylosoxidans NCIMB 11015 has its own unique blue or type 1 copper protein resonance Raman spectrum in the usual Cu-S(Cys) stretching region, nu(Cu-S(Cys)), with a pair of strong peaks at 412 and 420 cm(-1) and a weak peak at 364 cm(-1). The predominantly nu(Cu-S(Cys)) Raman bands at 412, 420, and 364 cm(-1) of the type 1 copper site all shifted to higher frequencies upon binding of nitrite to the type 2 copper site, and the resonance Raman difference spectra progressively intensified with the increments of nitrite ion concentration. Positive support for substrate binding to the type 2 copper is provided by the nu(Cu-S(Cys)) bands in the resonance Raman spectrum of a type 2 copper-depleted enzyme, which is insensitive to the presence of NO2-. The shift to higher frequency of the Raman bands of the type 1 copper center with the addition of nitrite ions suggests a stronger Cu-S(Cys) interaction in the substrate-bound A. xylosoxidans nitrite reductase.     

Reduction of thermal fluctuations in a cryogenic laser interferometric gravitational wave detector

The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW detector with sapphire mirrors from the Cryogenic Laser Interferometer Observatory at 17 and 18 K. The detector sensitivity, which was limited by the mirror's thermal fluctuation at room temperature, was improved in the frequency range of 90 to 240 Hz by cooling the mirrors. The improved sensitivity reached a maximum of 2.2×10(-19) m/√Hz at 165 Hz.     

Preparation of Co–Al and Ni–Al layered double hydroxide thin films by a sol–gel process with hot water treatment

Using hot water treatment of sol–gel derived precursor gel films, Co–Al and Ni–Al layered double hydroxide (LDH) thin films were prepared. The precursor gel films of Al₂O₃–CoO or Al₂O₃–NiO were prepared from cobalt or nickel nitrates and aluminum tri-sec-butoxide using the sol–gel method. Then, the precursor gel films were immersed in a NaOH aqueous solution of 100 °C. Nanocrystallites of Co–Al and Ni–Al LDH were precipitated with the hot water treatment with NaOH solution. The largest amounts of nanocrystals were obtained with a solution of pH = 10 for Co–Al LDH, and with that of pH = 9 for Ni–Al LDH. X-ray diffraction measurements confirmed that this process formed CO₃ ²⁻ intercalated LDHs. Both Co–Al and Ni–Al LDH thin films were confirmed to work as electrodes for electrochemical devices by cyclic voltammogram measurements.     

Formulation study on retinoic acid gel composed of iota-carrageenan, polyethylene oxide and Emulgen® 408

In the present study, all-trans retinoic acid (RA) gels formulated with various compositions of polyethylene oxide (Emulgen?) and iota-carrageenan (ι-CG) were prepared and their physicochemical properties were evaluated. The compression energy, which is the work required to compress the product through a fixed distance, increased with increasing amount of ι-CG or Emulgen?. The adhesion energy and displacement decreased with increasing amount of ι-CG or Emulgen? due to the progression of gel formation. From the results of the sensory tests, the properties of RA gels such as adhesiveness, gel strength and spreadability seemed to be adjustable depending on the condition of skin by varying the components of RA gels. Through photostability study, the expiration date and storage conditions of RA gels were determined as "4°C for 28?d with no exposure to light."     

Mineral composition of frozen taro for determination of geographic origin

The mineral composition of frozen food of taro [Colocasia esculenta (L.) Schott] was analyzed to categorize the geographical production place of taro. The concentrations of Co and H₂PO₄ ⁻ were found to be useful to separate the producing place between Japan and China. The analysis was performed by instrumental neutron activation analysis (INAA) and ion chromatography (IC). In the case of INAA, the samples were dried and sealed in a vinyl bag and irradiated with thermal neutrons from JRR3M, installed at Japan Atomic Energy Agency (JAEA). The activated samples were cooled down for a few weeks and the elements (Co, Cr, Fe, Rb, Zn) were determined. Cobalt concentration of frozen taro from China was higher than that from Japan. The tendency was the same in the fresh sample of taro. When concentration of H₂PO₄ ⁻ of frozen sample was measured, taro from Japanese product was higher than that of Chinese one, contrary to fresh sample. This result might be caused by the leakage of H₂PO₄ ⁻ during freezing process, indicating that we should be careful to apply the discrimination indicators. In addition to Co, there was a significant difference of Rb and Fe concentrations between frozen taro from Japan and China.     

Ultraviolet-Laser-Induced Crystallization of Sol-Gel Derived Inorganic Oxide Films

Structural changes stimulated by ultraviolet (UV) laser irradiations of sol-gel derived inorganic oxide films were investigated. Dried gel films of TiO₂, Nb₂O₅, Ta₂O₅, SrTiO₃ and Pb(Zr _x Ti_1–x )O₃ (PZT) were found to be crystallized by the laser irradiation. On the other hand, the photo-induced change in gel films of BaTiO₃, LiNbO₃ and LiTaO₃ was not observed although the laser beams were absorbed in the films. These sol-gel films were thermally crystallized at almost the same temperature around 600–700°C except TiO₂. Thus, the UV-laser-induced crystallization is not directly ascribed to a simple thermal effect with the irradiation. Photochemical properties of the cations are assumed to be important for the change in sol-gel films.