Long-lived ultrafast spin precession in manganese alloys films with a large perpendicular magnetic anisotropy

Spin precession with frequencies up to 280 GHz is observed in Mn(3-δ)Ga alloy films with a perpendicular magnetic anisotropy constant K(u)～15 M?erg/cm(3). The damping constant α, characterizing macroscopic spin relaxation and being a key factor in spin-transfer-torque systems, is not larger than 0.008 (0.015) for the δ=1.46 (0.88) film. Those are about one-tenth of α values for known materials with large K(u). First-principles calculations well describe both low α and large K(u) for these alloys.     

Two-dimensional and three-dimensional Fermi surfaces of superconducting BaFe2(As(1-x)P(x))2 and their nesting properties revealed by angle-resolved photoemission spectroscopy

We have studied the three-dimensional shapes of the Fermi surfaces (FSs) of BaFe(2)(As(1-x)P(x))(2) (x=0.38), where superconductivity is induced by isovalent P substitution and by angle-resolved photoemission spectroscopy. Moderately strong electron mass enhancement has been identified for both the electron and hole FSs. Among two observed hole FSs, the nearly two-dimensional one shows good nesting with the outer two-dimensional electron FS, but its orbital character is different from the outer electron FS. The three-dimensional hole FS shows poor nesting with the electron FSs. The present results suggest that the three dimensionality and the difference in the orbital character weaken FS nesting while partial nesting among the outer electron FSs of d(xy) character and/or that within the three-dimensional hole FS becomes dominant, which may lead to the nodal superconductivity.     

Influence of head shape of solid body plunging into water on splash formation

Abstract  

We experimentally investigated the influence of a head shape of a solid body plunging into water on splash formation. Three different head shapes were tested: a hemisphere, cone, and circular cylinder. A hemisphere as a tail shape is common to all three head shapes. We captured images of splash formation using a high-speed CMOS camera. We found that a film flow generated at an early stage when a body impacts the water surface influences subsequent events until the splash sequence is completed. We explain the origin of the film flow according to the principle of conservation of momentum. The film flow as the primary splash originates from water displaced by the head. The meridian line, which connects the head to the tail of the body, affects separation of the film flow and causes the secondary splash. The air cavity generated when the body plunges into the water is also influenced by the head shape. The tertiary splash is formed by a reaction of the air cavity, which is detached from the body. We found that the secondary dome-type splash obstructs growth of the tertiary splash. Thus, we conclude that the head shape affects all events of the splash.     

Single-shot polarization-imaging digital holography based on simultaneous phase-shifting interferometry

We propose single-shot digital holography which is capable of simultaneously capturing both the information of multiple phase-shifted holograms and the distribution of the polarization. In this technique, a single image sensor records both the information required for phase-shifting interferometry and that of the polarization states of objects using an array of polarizers. The essence of the technique is the capability of imaging the distribution of the polarization of three-dimensional objects with a single-shot exposure by using the space-division multiplexing of holograms. The validity of the proposed technique was confirmed by the preliminary experiments.     

Investigation of void formation beneath thin AlN layers by decomposition of sapphire substrates for self-separation of thick AlN layers grown by HVPE

Void formation at the interface between thick AlN layers and (0 0 0 1) sapphire substrates was investigated to form a predefined separation point of the thick AlN layers for the preparation of freestanding AlN substrates by hydride vapor phase epitaxy (HVPE). By heating 50–200 nm thick intermediate AlN layers above 1400 °C in a gas flow containing H₂ and NH₃, voids were formed beneath the AlN layers by the decomposition reaction of sapphire with hydrogen diffusing to the interface. The volume of the sapphire decomposed at the interface increased as the temperature and time of the heat treatment was increased and as the thickness of the AlN layer decreased. Thick AlN layers subsequently grown at 1450 °C after the formation of voids beneath the intermediate AlN layer with a thickness of 100 nm or above self-separated from the sapphire substrates during post-growth cooling with the aid of voids. The 79 μm thick freestanding AlN substrate obtained using a 200 nm thick intermediate AlN layer had a flat surface with no pits, high optical transparency at wavelengths above 208.1 nm, and a dislocation density of 1.5×10⁸ cm⁻².     

Application of 28Mg to the kinetic study of Mg uptake by rice plants

The time course of Mg uptake and release using intact rice plants and ²⁸Mg as a tracer is presented. Since there is no conventional Mg tracer available, ²⁸Mg was produced via ²⁷Al(α, 3p)²⁸Mg reaction using a cyclotron. Using the purified ²⁸Mg tracer, it was found that the uptake amount of ²⁸Mg by the rice plants increased linearly during 30 min of application. After ²⁸Mg treatment for 90 min, the roots were sequentially washed with iced solution for 120 min. Within about 10 min, almost all of the ²⁸Mg, that was thought to be weakly bound to the apoplast, was washed away.     

Simulation of metastable zone width and induction time for a seeded aqueous solution of potassium sulfate

The metastable zone width (MSZW, ΔT_m) and induction time (t_ind) were determined with computer simulation for seeded batch crystallization of potassium sulfate from aqueous solution. The MSZW and induction time determined with simulation showed the same behavior as experimental values reported in the literature; log (ΔT_m) increased linearly with an increase in log R (R: cooling rate) and t_ind decreases in proportion to (ΔT)⁻ⁿ (ΔT: supercooling, n: nucleation order in the secondary rate expression of B=k_n(ΔT)ⁿ). The secondary nucleation parameters (k_n and n) were deduced both from the simulated MSZW and induction times by using the previously proposed model [J. Cryst. Growth, 2010, 312, 548–554]. The secondary nucleation rate calculated with the deduced parameters was in agreement with that calculated with the parameters input for simulation.     

Analytical aspects of cyanobacterial volatile organic compounds for investigation of their production behavior

In order to fully understand the role of volatile organic compounds (VOCs) under natural conditions, an adaptable analytical method was developed as the first step. β-Ionone, β-cyclocitral, 2-methyl-1-butanol and 3-methyl-1-butanol were simultaneously analyzed in addition to geosmin and 2-MIB using GC/MS with SPME. The slight modification of a known method allowed the simultaneous detection and quantification of these VOCs. The SIM of the 3-methyl-1-butanol was always accompanied by a shoulder peak, suggesting the presence of two compounds. In order to separate both compounds, the GC/MS conditions were optimized, and the additional peak was identified as 2-methyl-1-butanol by direct comparison of the authentic compound, indicating that the Microcystis strain always produces a mixture of 2-methyl-1-butanol and 3-methyl-1-butanol. Furthermore, it was found that 2-methyl-1-butanol and 3-methyl-1-butanol were predominant in the dissolved fractions. β-Cyclocitral was easily oxidized to provide the oxidation product, 2,6,6-trimethylcyclohexene-1-carboxylic acid, which causes the blue color formation of cyanobacteria as a consequence of acid stress. The intact acid could be satisfactorily analyzed using the usual GC/MS without derivatization.