Formation of Hierarchical Lamellae‐in‐Lamella Nanostructures from Polymer Blends Via Controlled Nonequilibrium Freezing

The creation of hierarchical nanostructures in polymeric materials has been intensively studied due to the great potential to tailor their physicochemical properties. Although much success has been achieved over the past decades in block copolymers, hierarchical structure engineering in polymer blends remains a great challenge. Here, the formation of hierarchical lamellae‐in‐lamella nanostructures from polymer blends via controlled nonequilibrium freezing is reported. Polymer blends are first dissolved in molten hexamethylbenzene (HMB) to form a homogeneous melt. When cooled to below its melting temperature, the HMB is crystallized and depleted, and the polymers are directionally solidified. This process is rapid enough that phase separation of the polymer blends is kinetically trapped at the nanoscale level. Then, the polymer blend epitaxially crystallizes onto the HMB inside the nanophase, resulting in the hierarchical lamellae‐in‐lamella structure. This structure is stable under ambient conditions and tunable depending on the annealing temperature and blending ratio.

     

Practical Synthesis of 2-Iodosobenzoic Acid (IBA) without Contamination by Hazardous 2-Iodoxybenzoic Acid (IBX) under Mild Conditions

We report a convenient and practical method for the preparation of nonexplosive cyclic hypervalent iodine(III) oxidants as efficient organocatalysts and reagents for various reactions using Oxone^® in aqueous solution under mild conditions at room temperature. The thus obtained 2-iodosobenzoic acids (IBAs) could be used as precursors of other cyclic organoiodine(III) derivatives by the solvolytic derivatization of the hydroxy group under mild conditions of 80 °C or lower temperature. These sequential procedures are highly reliable to selectively afford cyclic hypervalent iodine compounds in excellent yields without contamination by hazardous pentavalent iodine(III) compound.     

Selective ablation of atherosclerotic lesions with less thermal damage by controlling the pulse structure of a quantum cascade laser in the 5.7-µm wavelength range

Cholesteryl esters are the main components of atherosclerotic plaques, and they have an absorption peak at the wavelength of 5.75 µm. To realize less-invasive ablation of the atherosclerotic plaques using a quasi-continuous wave (quasi-CW) quantum cascade laser (QCL), the thermal effects on normal vessels must be reduced. In this study, we attempted to reduce the thermal effects by controlling the pulse structure. The irradiation effects on rabbit atherosclerotic aortas using macro pulse irradiation (irradiation of pulses at intervals) and conventional quasi-CW irradiation were compared. The macro pulse width and the macro pulse interval were determined based on the thermal relaxation time of atherosclerotic and normal aortas in the oscillation wavelength of the QCL. The ablation depth increased and the coagulation width decreased using macro pulse irradiation. Moreover, difference in ablation depth between the atherosclerotic and normal rabbit aortas using macro pulse irradiation was confirmed. Therefore, the QCL in the 5.7-µm wavelength range with controlling the pulse structure was effective for less-invasive laser angioplasty.     

Determination of the scattering coefficient of biological tissue considering the wavelength and absorption dependence of the anisotropy factor

The anisotropy factor g, one of the optical properties of biological tissues, has a strong influence on the calculation of the scattering coefficient μ _s in inverse Monte Carlo (iMC) simulations. It has been reported that g has the wavelength and absorption dependence; however, few attempts have been made to calculate μ _s using g values by taking the wavelength and absorption dependence into account. In this study, the angular distributions of scattered light for biological tissue phantoms containing hemoglobin as a light absorber were measured by a goniometric optical setup at strongly (405 nm) and weakly (664 nm) absorbing wavelengths to obtain g. Subsequently, the optical properties were calculated with the measured values of g by integrating sphere measurements and an iMC simulation, and compared with the results obtained with a conventional g value of 0.9. The μ _s values with measured g were overestimated at the strongly absorbing wavelength, but underestimated at the weakly absorbing wavelength if 0.9 was used in the iMC simulation.     

1.5 mJ, 6.4 fs parametric chirped-pulse amplification system at 1 kHz

We demonstrate an optical parametric chirped-pulse amplification (OPCPA) system with the pulse energy of 1.5 mJ at a 1 kHz repetition rate. The newly developed 100 ps Ti:sapphire pump laser system, which was optically synchronized with OPCPA seed pulses, delivered 10 mJ, 400 nm pump pulses. After three-stage parametric amplification, recompression of the amplifier output from 45 ps to 6.4 fs was performed. The pulse width of 6.4 fs is, to our knowledge, the shortest ever obtained by OPCPA, and the average power of 1.5 W (1.5 mJ, 1 kHz) is believed to be the highest among few-cycle OPCPA systems.     

High-Affinity Ratiometric Fluorescence Probe Based on 6-Amino-2,2′-Bipyridine Scaffold for Endogenous Zn2+ and Its Application to Living Cells

Zinc is an essential trace element involved in many biological activities; however, its functions are not fully understood. To elucidate the role of endogenous labile Zn²⁺, we developed a novel ratiometric fluorescence probe, 5-(4-methoxyphenyl)-4-(methylsulfanyl)-[2,2′-bipyridin]-6-amine (6 (rBpyZ)) based on the 6-amino-2,2′-bipyridine scaffold, which acts as both the chelating agent for Zn²⁺ and the fluorescent moiety. The methoxy group acted as an electron donor, enabling the intramolecular charge transfer state of 6 (rBpyZ), and a ratiometric fluorescence response consisting of a decrease at the emission wavelength of 438 nm and a corresponding increase at the emission wavelength of 465 nm was observed. The ratiometric probe 6 (rBpyZ) exhibited a nanomolar-level dissociation constant (K_d = 0.77 nM), a large Stokes shift (139 nm), and an excellent detection limit (0.10 nM) under physiological conditions. Moreover, fluorescence imaging using A549 human lung adenocarcinoma cells revealed that 6 (rBpyZ) had good cell membrane permeability and could clearly visualize endogenous labile Zn²⁺. These results suggest that the ratiometric fluorescence probe 6 (rBpyZ) has considerable potential as a valuable tool for understanding the role of Zn²⁺ in living systems.     

Linear polybiurets: Facile synthesis and characteristic properties

Linear polybiurets have been synthesized by polyaddition of benzyloxyamine and diisocyanates, and properties of the novel polymeric materials have been elucidated. Prior to polymerization, model reactions between benzyloxyamine and phenyl isocyanate were examined in detail and proved to be controlled by the molar ratio of reagents and by catalysts to give the urea (1:1 adduct) and/or biuret (1:2 adduct). Under appropriate conditions, the biuret was synthesized in a quantitative yield. Polymerization of equimolar amounts of benzyloxyamine and diphenylmethane or hexamethylene diisocyanate proceeded smoothly to give polybiurets with inherent viscosities up to 0.52 dL/g. The benzyl group of the model biuret and polybiuret could be removed by catalytic hydrogenation. Both the N-benzyloxy-type and N-hydroxy-type polybiurets showed excellent solubility in common organic solvents. The two kinds of polybiurets as well as model biurets adsorbed metal cations efficiently. The N-hydroxybiuret structure exhibited particularly high affinity for iron(III) and was useful for selective removal of iron from metal cation mixtures. © 1996 John Wiley & Sons, Inc.     

Rearrangement of 6,7-dithiabicyclo[3.1.1]heptane 6-oxides to a 7,8-dithia-6-oxabicyclo[3.2.1]octane catalyzed by montmorillonite K 10

Treatment of 2,2,4,4-tetramethyl-1,5-diphenyl-6,7-dithiabicyclo[3.1.1]heptane 6-endo-oxide ( 2 ) with Montmorillonitc K 10 in dichloromethane gave 2,2,-4,4-tetramethyl-1,5-diphenyl-7,8-dithia-6-oxabicyclo-[3.2.1]octane ( 6 ) (11%) with recovery of 2 (87%). Under similar reaction conditions, the 6-exo-oxide 7 and the sulfenate 6 gave a mixture of 6 (21%), 2 (67%), and 7 (9%) and a mixture of 2 (89%) and 6 (9%), respectively. These results indicate the relative thermodynamic stabilities of the three compounds to be 2 > 6 > 7 . PM3 calculations on these compounds showed the heats of formation (kcal/mol) to be in the following order: 6 (44.12783), 2 (57.46721), and 7 (59.37918). The driving force of this unusual 1,2-rearrangement of 2 and 7 to 6 would be the release of the ring strain of the bicyclo[3.1.1]heptane system of 2 and 7 by ring expansion.     

The effect of vertical angular subtense on perception of slant from horizontal size disparity

The slant from horizontal size disparity is geometrically predictable. The apparent slant, however, is usually not equivalent to the prediction as numerous visual factors affect it. The aim of this study is to examine whether the vertical angular subtense of a stimulus with horizontal size disparity alters the magnitude of perceived slant for a given horizontal angular subtense. The results indicate that a smaller angular subtense of display produces a smaller magnitude of slant perception.