Design and synthesis of highly sensitive and selective fluorescein-derived magnesium fluorescent probes and application to intracellular 3D Mg2+ imaging

The role of intracellular magnesium ions is of high interest in the fields of pharmacology and cellular biology. To accomplish the dynamic and three-dimensional imaging of intracellular Mg2+, there is a strong desire for the development of optimized Mg2+ fluorescent probes. In this paper we describe the design, synthesis, and cellular application of the three novel Mg2+ fluorescent probes KMG-101, -103, and -104. The compounds of this series feature a charged beta-diketone as a binding site specific for Mg2+ and a fluorescein residue as the fluorophore that can be excited with an Ar+ laser such as is widely used in confocal scanning microscopy. This molecular design leads to an intensive off-on-type fluorescent response toward Mg2+ ions. The two fluorescent probes KMG-103 and -104 showed suitable dissociation constants (Kd,Mg2+ = 2 mM) and nearly a 10-fold fluorescence enhancement over the intracellular magnesium ion concentration range (0.1-6 mM), allowing high-contrast, sensitive, and selective Mg2+ measurements. For intracellular applications, the membrane-permeable probe KMG-104AM was synthesized and successfully incorporated into PC12 cells. Upon application of the mitochondria uncoupler FCCP to the probe-incorporated cells, the resulting increase in the free magnesium ion concentration could be followed over time. By using a confocal microscope, the intracellular 3D magnesium ion concentration distributions were satisfactorily observed.     

How Effectively is the Photon Activation Analysis Applied to Meteorite Samples?

Chondritic meteorite samples were analyzed nondestructively by photon activation analysis. Powdered samples weighing about 50 mg each were irradiated with photons (-rays) converted from electrons accelerated by a linear electron accelerator at 20 and 30 MeV. With 30-minute and 6-hour irradiations, 11 and 12 elements with duplication of 6 elements could be determined, respectively. Considering that several major elements including Mg, Si and Fe can be determined in addition to Ti, Rb, Sr, Y and Zr, which cannot or hardly be determined by instrumental neutron activation analysis (INAA) with rather high sensitivity, instrumental photon activation analysis is as effective as INAA.     

Polymeric organosilicon systems. XVII. Synthesis and photochemical and conducting properties of poly[o-and m-(disilanylene)phenylene]s

Poly[o-(tetramethyldisilanylene)phenylene] ( 2a ), poly[o-(1,2-dimethyldiphenyldisilanylene)-phenylene] ( 2b ), poly[m-(tetramethyldisilanylene)phenylene] ( 2c ), and poly[m-(1,2-dimethyldiphenyldisilanylene)phenylene] ( 2d ) were prepared by the sodium condensation reaction of the corresponding 1,2-and 1,3-bis (chlorosilyl)benzenes in toluene. Irradiation of thin films of 2a-2d in air resulted in a rapid decrease of absorption maxima in the ultraviolet region. The photolysis of 2b and 2d in benzene afforded photodegradation products with low molecular weights. When thin films of 2b and 2d were doped with antimony pentafluoride vapor, films which have conductivities of semi-conductor level were obtained. © 1993 John Wiley & Sons, Inc.     

Determination of traces of natural brassinosteroids as dansylaminophenylboronates by liquid chromatography with fluorimetric detection

A microanalytical method for the determination of traces of natural brassinosteroids as their dansylaminophenylboronates by liquid chromatography with fluorimetric detection is described. The boronates are easily prepared by the reaction of brassinosteroids with dansylaminophenylboronic acid (DABA), which was newly synthesized as a precolumn fluorogenic reagent for brassinosteroids. The potential of the method is demonstrated by the separation of a standard brassinosteroid mixture and the analysis of a biologically active fraction sample obtained from an extract of Zea mays L. pollen. The detection limit of the DABA derivative was found to be 25 pg for brassinolide, which is superior to that of the phenanthreneboronate derivative.     

Photochemische Reaktionen. 107. Mitteilung. Zur Photochemie offenkettiger 2,6-bzw. 2,7-Dien-Carbonylverbindungen

The Photochemistry of Open-Chained 2,6- or 2,7-Dien-Carbonyl Compounds On ¹n, π*-excitation (λ > 347 nm) citral (5) and the methyl ketone 10 isomerize to compounds A (7, 19) and B (6, 20) , whereas the phenyl ketone 11 changes into the isomer 24 of type E. Evidence is given that the conversions to A and B may arise from the ³n, π*-state of the 2,6-diene-carbonyl compounds. On ¹n, π*-excitation (λ = 254 nm) 5 and 10 yield the isomers A (7, 19) and D (18, 22) , but no products of type B. Furthermore, conversion of 10 to the isomer 21 of type C is observed. Selective ¹n, π*-excitation (λ = 254 nm) as well as selective ¹n, π*-excitation (λ > 347 nm) of the 2,7-diene-carbonyl compounds 12 and 13 give rise to isomerization to the compounds F (25, 28) , exclusively. The intramolecular [2 + 2]-photocycloadditions are shown to be triplet processes. UV.-irradiation (λ > 280 nm) of compounds F (25, 28) furnishes the isomeric products G (26, 29) which photoisomerize to oxetanes of type H (27, 30).     

The effects of epimerization at the 3(1)-position of bacteriochlorophylls c on their aggregation in chlorosomes of green sulfur bacteria. Control of the ratio of 3(1) epimers by light intensity

R- and S-epimerization at the 3(1) position of bacteriochlorophyll (BChl) c and the formation of rod-like aggregates in chlorosomes of green sulfur bacteria were markedly affected in Chlorobium (Cb.) tepidum and Cb. limicola by cultivation under various light intensities (photon fluence rate). The stronger the light, the higher the ratio of the S-epimer to the R-epimer for each homolog of BChl c in the bacteria. S[P,E] BChl cF and S[I,E] BChl cF were found to be the major S-epimers in Cb. tepidum and Cb. limicola, respectively. R[P,E] BChl cF decreased markedly compared to R[E,E] BChl cF in Cb. tepidum, whereas no observable change in the ratio of R[P,E]/R[E,E] was detected for Cb. limicola. With increase in light intensity the Qy absorption maximum of the bacteria shifted to shorter wavelengths. In vitro spectroscopic studies of the aggregates showed a marked difference in the formation of aggregates from R- and S-epimers of BChl c; the S-epimers formed aggregates much more slowly than did the R-epimers. These results suggest that the ratio of the epimers of BChl c might significantly affect the aggregation of BChl in the chlorosome. We propose different roles for the R- and S-epimers in chlorosomes of Cb. limicola and Cb. tepidum.     

A concept for controlling singlet oxygen (1 Delta g) yields using nitroxide radicals: phthalocyaninatosilicon covalently linked to nitroxide radicals

In this study, we have investigated the singlet oxygen ((1)Delta(g)) generation mechanism using phthalocyaninatosilicon (SiPc) covalently linked to nitroxide radicals (NRs), and we succeeded in increasing the singlet oxygen quantum yield (Phi(Delta)) by linking the NRs. This originates from both an increase in the triplet quantum yield and excited-state lifetimes long enough to utilize photochemical reactions. Because the electron exchange interactions with paramagnetic species were known to result only in very fast excited-state relaxation, leading to a decrease in photochemical reaction yields, this increase in Phi(Delta) is an unusual and precious example for increasing photochemical reaction yields by electron exchange interactions with paramagnetic species. In addition, our experiments and theoretical analyses show that the spin-selective energy transfer rate constant is not influenced by linking the NRs and can be evaluated by the product of spin-statistical factors and matrix elements between the initial and final states.     

Factors affecting physicochemical properties of liposomes prepared with hydrogenated purified egg yolk lecithins by the microencapsulation vesicle method

We examined hydrogenated purified egg yolk lecithins, having practical advantages over non-hydrogenated ones, as liposomal membrane materials. Liposomes were prepared by the microencapsulation vesicle (MCV) method in which liposomes are formed through two-step emulsification and dispersion. Three types of purified egg yolk lecithins with different iodine values were examined after being dissolved in one of three lipid solvents. The liposome size increased as the temperature during the second emulsification increased, being closer to the boiling temperature of the solvent. The preparation temperature in relation to the transition temperature of each lecithin was also a factor affecting liposome sizes. As for the encapsulation efficiencies of the model compound calcein in liposomes, they differed mainly depending on the solubility of each lecithin in a lipid solvent and it was more obvious in hydrogenated lecithins. A high preparation temperature resulted in lower encapsulation efficiencies, suggesting that leakage of encapsulated calcein was facilitated at high temperature in the MCV methods. There was a significant correlation between liposome sizes and encapsulation efficiencies in non-hydrogenated purified egg yolk lecithin but not in hydrogenated ones. When using hydrogenated purified egg yolk lecithins as liposomal membrane materials, it was suggested that a lipid solvent should be chosen so that a lecithin completely dissolves under the preparation condition in order to achieve a higher encapsulation efficiency. Smaller liposome particles were obtained when the second emulsification was performed at a lower temperature compared with the boiling point of the lipid solvent. These findings can be applied to control encapsulation efficiencies and particle sizes in each particular liposome preparation enclosing therapeutic agents.     

Simultaneous discrimination of diastereotopic groups and faces: the first example in intramolecular [3+2] and [2+2+1] cycloaddition reactions

To explore a novel concept for controlling diastereoselectivity, systematic studies on the sense and degree of diastereotopic groups and face selections in intramolecular [3 + 2] (nitrile oxide and nitrone) and [2 + 2 + 1] (Pauson-Khand) cycloadditions have been conducted. Optically pure methyl (S)-3,4-O-isopropylidene-3,4-dihydroxybutanoate (5) and methyl (S)-2,3-O-isopropylidene-2,3-dihydroxypropanoate (6) were converted to substrate aldehydes (1-4) that bear geminal allyl groups and four types of controllers with the intention of imparting a stereochemical bias to the allylic groups and their faces. The controllers involve 1,2-bis(tert-butyldimethylsiloxy), 1,3-bis(tert-butyldimethylsiloxy), 1,2-acetonide, and 1,3-acetonide groups, which are referred to as 1,2-(TBDMSO)(2), 1,3-(TBDMSO)(2), 1,3-dioxolane, and 1,3-dioxane, respectively. Twelve runs of cycloaddition reactions as combinations between the three types of reactions and the four types of substrates were performed to provide bicyclo[4.3.0] or -[3.3.0] adducts of synthetic importance in which isoxazolidine, isoxazoline, or cyclopentenone segments were fused. For every case, high levels of diastereoselectivity have been achieved: >99% (in eight cases), 82%, and 76% for the discrimination of diastereotopic groups and 68-->99% for the discrimination of diastereotopic faces. On the basis of the absolute structures of the cycloadducts, plausible stereochemical models are proposed.     

Triethylborane as an efficient promoter for palladium-catalyzed allylation of active methylene compounds with allyl alcohols

Without prior activation of allyl alcohols, allylation of a variety of active methylene compounds with allyl alcohols proceeds smoothly at rt-50°C in the presence of catalytic amounts of Pd(OAc)₂ (1-10 mol%), Et₃B (30-240 mol%), a phosphine ligand (1-20 mol%), and a base (0 to 50-60 mol%).