New photoswitching unit for magnetic interaction: diarylethene with 2,5-bis(arylethynyl)-3-thienyl group

Photoswitching of the intramolecular magnetic interaction was demonstrated using diarylethenes with 2,5-bis(arylethynyl)-4-methyl-3-thienyl side group. Two nitroxide radicals were placed at each end of the 2,5-bis(arylethynyl)-4-methyl-3-thienyl group. Three kinds of aryl groups, 2,5-thienylene, p-phenylene, and m-phenylene groups, were used in the arylethynyl moiety. The diarylethene photoswitching units have an extended pi-conjugated chain on one side of the diarylethene. The photochromic reactivity was dependent on the arylethynyl group. Diarylethenes with m-phenylene group showed an efficient photochromic reactivity. Along with the photochromic reaction the diarylethenes showed photoswitching of an ESR spectrum originating from the change in the magnetic interaction between two unpaired electrons. The open-ring isomer showed stronger exchange interaction than the photogenerated closed-ring isomer. The magnetic interaction between two radicals via the pi-conjugated chain was altered by photocyclization due to the change of the hybrid orbital at the 2-position of the thiophene ring from sp(2) to sp(3).     

Phenomenological analysis of elongational flow birefringence in semidilute solutions of hydroxypropylcellulose

The relaxation time of a polymer chain in an elongational flow field was investigated for hydroxypropylcellulose (HPC) semidilute solution systems by two methods: phenomenological analysis of elongational flow-induced birefringence, and dynamic light scattering (DLS) and rheological measurements. To understand the relaxation time of an entangled semiflexible polymer solution in an elongational flow field, scaling analysis of the elongational flow-induced birefringence curve was performed. The results of both temperature and concentration scaling analyses showed that birefringence curves at different temperatures and at several HPC concentrations were described well by a universal birefringence–strain rate curve. This scaling behavior was compared with the "fuzzy cylinder" model. The critical strain rate corresponded to the correlation time of the slow relaxation mode determined by DLS measurement and the relaxation spectrum obtained by dynamic viscoelasticity measurement. The elongational flow-induced birefringence observed in an HPC semidilute solution was concluded to be attributed to the orientation of the HPC segment in the entangled molecular system, because the dominant relaxation mode is found to be the concentration fluctuation of an entangled molecular cluster in a quiescent state.     

Lewis Acid-Catalyzed Hydrostannation of Acetylenes. Regio- and Stereoselective Trans-Addition of Tributyltin Hydride and Dibutyltin Dihydride

Lewis acids such as ZrCl(4) or HfCl(4) catalyze the hydrostannation of acetylenes 1 by tributyltin hydride to produce the cis vinylstannanes 2 by regio- and stereoselective anti-hydrostannation. The hydrostannation of acetylenes using dibutyltin dihydride was also catalyzed by ZrCl(4) to give the stereodefined Z-Z divinyltin derivatives 4 by an anti-hydrostannation pathway. The use of nonpolar solvents such as toluene or hexane was essential for obtaining high stereoselectivity and chemical yield. Since ZrCl(4) and HfCl(4) are not soluble in such solvents, the hydrostannations were carried out in a heterogeneous system. The reactions of internal acetylenes with Bu(3)SnH proceeded smoothly, although the use of stoichiometric amounts of ZrCl(4) gave better results. The ZrCl(4)-catalyzed hydrostannation at 0 degrees C gave better yields and stereoselectivities than the reaction at room temperature. To help clalify the reason, the reaction of Bu(3)SnH with ZrCl(4) was monitored by (1)H and (119)Sn NMR spectroscopy, and it was found that Bu(3)SnH reacted with ZrCl(4) at room temperature to afford a mixture of tributyltin hydride, dibutyltin dihydride, and tetrabutyltin.     

Stereoselective syntheses of highly functionalized bicyclo[3.1.0]hexanes: a general methodology for the synthesis of potent and selective mGluR2/3 agonists

[Chemical reaction: See text] A Et3Al mediated intramolecular epoxide opening, cyclopropanation reaction is described. The transformation provided highly functionalized bicyclo[3.1.0]hexane systems in high efficiency and with perfect H or F endo selectivity. Application of this reaction to the synthesis of mGluR2/3 agonist 1 (43% overall yield) and a few intermediates suitable for the synthesis of other bicyclo[3.1.0]hexane mGluR2/3 agonists is discussed.     

Influence of amino acid side chain packing on Fe-methionine coordination in thermostable cytochrome C

Paramagnetic NMR and optical studies of the oxidized forms of mesophile Pseudomonas aeruginosa cytochrome c(551) and its quintuple mutant (F7A/V13M/F34Y/E43Y/V78I), and thermophile Hydrogenobacter thermophilus cytochrome c(552) demonstrated that the amino acid side chain packings in the protein interior influence the coordination bond between the heme iron and the axial methionine in the proteins. The strength of heme axial coordinations was found to correlate with the overall protein thermostability.     

Arg-72 of pharaonis phoborhodopsin (sensory rhodopsin II) is important for the maintenance of the protein structure in the solubilized states

In bacteriorhodopsin (bR), Arg-82bR has been proven to be a very important residue for functional role of this light-driven proton pump. The arginine residue at this position is a super-conserved residue among archaeal rhodopsins. pharaonis phoborhodopsin (ppR; or called as "pharaonis sensory rhodopsin II") has its absorption maximum at 498 nm and acts as a sensor in the membrane of Natronobacterium pharaonis, mediating the negative phototaxis from the light of wavelength shorter than 520 nm. To investigate the role of the arginine residue (Arg-72ppR) of ppR corresponding to Arg-82bR, mutants whose Arg-72ppR was replaced by alanine (R72A), lysine (R72K), glutamine (R72Q) and serine (R72S) were prepared. These mutants were unstable in low concentrations of NaCl and lost their color gradually when the proteins were solubilized with 0.1% n-dodecyl-beta-D-maltoside. The order of instability was R72S > R72A > R72K > R72Q > the wild type. The rates of denaturation were reduced in a solution of high concentrations of monovalent anions.     

Origin of visible-light-driven photocatalysis: A comparative study on N/F-doped and N-F-codoped TiO2 powders by means of experimental characterizations and theoretical calculations

An overall comparative study was carried out on N-doped, F-doped, and N-F-codoped TiO₂ powders (NTO, FTO, NFTO) synthesized by spray pyrolysis in order to elucidate the origin of their visible-light-driven photocatalysis. The comparisons in their experimentally obtained characteristics were based on the analysis of XPS, UV-Vis, PL, NH₃-TPD and ESR spectra. The comparisons in their theoretically predicted properties were based on the analysis of the calculated electronic structures. As the results, N-doping into TiO₂ resulted in not only the improvement in visible-light absorption but also the creation of surface oxygen vacancies. F-doping produced several beneficial effects including the creation of surface oxygen vacancies, the enhancement of surface acidity and the increase of Ti³⁺ ions. Doped N atoms formed a localized energy state above the valence band of TiO₂, whereas doped F atoms themselves had no influence on the band structure. The photocatalytic tests indicated that the NFTO demonstrated the highest visible-light activity for decompositions of both acetaldehyde and trichloroethylene. This high activity was ascribed to a synergetic consequence of several beneficial effects induced by the N-F-codoping.     

Fluorine-doped TiO2 powders prepared by spray pyrolysis and their improved photocatalytic activity for decomposition of gas-phase acetaldehyde

F-doped TiO₂ (FTO) powders were synthesized by spray pyrolysis (SP) from an aqueous solution of H₂TiF₆. The resulting FTO powders possessed spherical particles with a rough surface morphology and a strong surface acidity. The fluorine concentrations in the FTO powders calculated from XPS spectra significantly depended on SP temperature and ranged from 2.76 to 9.40 at.%. The FTO powder prepared at SP temperature of 1173 K demonstrated the highest photocatalytic activity for the decomposition of gas-phase acetaldehyde under both ultraviolet (UV) and visible light (vis) irradiations, and it was higher than that of commercial P 25. This high photocatalytic activity was ascribed to several beneficial effects produced by F-doping: enhancement of surface acidity, creation of oxygen vacancies, and increase of active sites. It was interesting to point out that the vis photocatalytic activity of FTO powders was achieved by the creation of surface oxygen vacancies rather than the improvement of optical absorption property of bulk TiO₂ in vis region.     

Stereodivergent process for the synthesis of the decahydroquinoline type of dendrobatid alkaloids

A flexible and stereodivergent synthesis of the cis- and trans-fused 2,5-disubstituted octahydroquinolinone ring systems bearing all four stereogenic centers for the synthesis of the decahydroquinoline type of dendrobatid alkaloids has been achieved. The strategy involves stereoselective and stereodivergent construction of 2,3,6-trisubstituted piperidine ring systems using the Michael type of conjugate addition reaction to the enaminoesters 1 and 3, the intramolecular aldol type of cyclization reaction of keto aldehydes 11 and 12, and ring-closing metathesis of 21 as key steps.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.