Facile Synthesis of Free‐Standing Polymer Brush Films Based on a Colorless Polydopamine Thin Layer

A free‐standing polymer brush film with tailored thicknesses based on a colorless polydopamine (PDA) thin layer is prepared and characterized. The surface‐initiated atom transfer radical polymerization (ATRP) of 2‐hydroxyethyl methacrylate (HEMA) is performed on a PDA layer with thickness of ca. 6 nm, which generated an optically transparent and colorless free‐standing PHEMA brush film (1.5 cm × 1.5 cm). Because the cross‐linked PDA layer is used as the base for the polymer brushes, the reported method does not require cross‐linking the polymer brushes. The free‐standing film thicknesses of ≈16–75 nm are controlled by simply changing the ATRP reaction time. The results show that the free‐standing PHEMA brush film transferred onto a plate exhibits a relatively smooth surface and is stable in any solvent.

     

Synthesis and Magnetic Property of Polyacetylene Bearing πConjugated Bis(Diphenylene)Phenylallyl Radical

Abstract

m- and p Bis(diphenylene)propenylphenylacetylene (m-, p-8) were synthesized and polymerized with WCI₆, MoCl₅, and Rh catalyst, yielding solvent-soluble poly(phenylacetylene)s bearing a π-conjugated bis(di-phenylene)propenyl groups (m-, p-7a). The polymers gave their polyanion derivatives, which were electrolytically and chemically oxidized to yield the corresponding polyradicals (m-, p-7b). The polyradicals were chemically very stable due to the resonance stabilization of an unpaired electron whose spin concentration could be increased up to ca. 2 × 10²³ spins per molar monomer unit. ESR spectroscopy suggested an antiferro-magnetic interaction between unpaired electrons.     

Distribution of phospholipid molecular species in autogenous access grafts for hemodialysis analyzed using imaging mass spectrometry

Arteriovenous fistulae (AVF) using vein grafts are frequently used for vascular access in hemodialysis. When superficial veins are used as autogenous access grafts for hemodialysis, atherosclerotic-like tissue degeneration often causes stenosis and obstruction. Although the differences between the pathology of degeneration in AVF and atherosclerosis (i.e., peripheral artery occlusive disease (PAD)) are known, their underlying molecular mechanisms are not. We determined the characteristic abnormal lipid metabolism of AVF. Oil red O staining clearly showed the accumulation of lipid molecules in AVF and PAD tissues. We found that the staining pattern was different between AVF and PAD tissues. The media and adventitia of AVF and the intima and media of PAD were intensely stained. Quantitative lipid analysis revealed that the amount of PL was significantly increased in AVF and PAD. Next, we performed matrix-assisted laser desorption/ionization imaging mass spectroscopy and determined the characteristic distribution of lysophosphatidylcholine (LPC) and phosphatidylcholine (PC) in AVF. The distribution patterns of LPC (1-acyl 16:0) and PC (diacyl 16:0/20:4) were consistent with the Oil red O staining images, suggesting that metabolisms related to LPC (1-acyl 16:0) and PC (diacyl 16:0/20:4) are altered in AVF.     

Comparison in fractal dimension between those obtained from structure factor and viscoelasticity of gel networks of 1,3:2,4-bis-O-(p-methylbenzylidene)-D-sorbitol in polystyrene melt at gel point

We investigated time evolution of shear moduli in the physical gelation process of 1,3:2,4-bis-O-(p-methylbenzylidene)-D-sorbitol in polystyrene melt. At the gel point, storage and loss shear moduli, G' and G", were described by the power law of frequency omega, G' approximately G" approximately omegan, with the critical exponent n being nearly equal to 2/3, in agreement with the value predicted by the percolation theory. We also investigated the structure factor over two decades in length scale at gel point by using ultra-small-angle X-ray scattering, and small-angle X-ray scattering. We found the power-law behavior in low-q region, indicating that the gel network forms the self-similar structure with mass-fractal dimension. Comparison between the exponent of mass-fractal dimension from structure factor and that from viscoelasticity indicates that hydrodynamic interactions are completely screened out and the excluded volume effects are dominant in the gel. The gel strength was found to increase with the decrease in the lower limit length scale of fractality.     

Power-free poly(dimethylsiloxane) microfluidic devices for gold nanoparticle-based DNA analysis

An extremely simple, power-free pumping method for poly(dimethylsiloxane)(PDMS) microfluidic devices is presented. By exploiting the high gas solubility of PDMS, the energy for the pumping is pre-stored in the degassed bulk PDMS, therefore no additional structures other than channels and reservoirs are required. In a Y-shaped microchannel with cross section of 100 microm width x 25 microm height, this method has provided flow rate of 0.5-2 nL s(-1), corresponding to linear velocity of 0.2-0.8 mm s(-1), with good reproducibility. As an application of the power-free pumping, gold nanoparticle-based DNA analysis, which does not rely on the cross-linking mechanism between nanoparticles, has been implemented in a microchannel with three inlets. Target 15mer DNA has been easily and unambiguously discriminated from its single-base substituted mutant. Instead of colorimetric detection in a conventional microtube, an alternative detection technique suitable for microdevices has been discovered-observation of deposition on the PDMS surfaces. The channel layout enabled two simultaneous DNA analyses at the two interfaces between the three laminar streams.     

Observation of electrostatically released DNA from gold electrodes with controlled threshold voltages

DNA oligo-nucleotides, localized at Au metal electrodes in aqueous solution, are found to be released when applying a negative bias voltage to the electrode. The release was confirmed by monitoring the intensity of the fluorescence of cyanine dyes (Cy3) linked to the 5' end of the DNA. The threshold voltage of the release changes depending on the kind of linker added to the DNA 3'-terminal. The amount of released DNA depends on the duration of the voltage pulse. Using this technique, we can retain DNA at Au electrodes or Au needles, and release the desired amount of DNA at a precise location in a target. The results suggest that DNA injection into living cells is possible with this method.     

In situ monitoring of metal nanoparticle self-assembly on protein-functionalized glass by broadband optical waveguide spectroscopy

Broadband, time-resolved optical waveguide (OWG) spectroscopy has been used for in situ, real-time investigation into the self-assembly of metal nanoparticle monolayers. The OWG spectroscopy makes it possible to use the transverse electric (TE) and transverse magnetic (TM) modes to measure surface plasmon absorption of immobilized metal nanoparticles in two directions, parallel and normal to the waveguide surface. Therefore, this technique can provide direction-dependent information on the metal nanoparticles at the interface. In this paper, a 50-microm-thick glass plate was used as a slab waveguide and the kinetics of Au nanoparticle adsorption on a hemoglobin-functionalized glass substrate was examined in the early stage of self-assembly. The findings show that with the TE mode the surface plasmon resonance (SPR) behavior for immobilized Au nanoparticles is different from that with the TM mode.     

Chemistry of renieramycins. Part 7: Renieramycins T and U, novel renieramycin-ecteinascidin hybrid marine natural products from Thai sponge Xestospongia sp.

Two new bistetrahydroisoquinoline marine natural products, renieramycins T (1) and U (2), were isolated from the Thai blue sponge Xestospongia sp. and their structures were elucidated by comparing spectral data with those of renieramycin M (3a) and ecteinascidin 770 (4a). These compounds are the first reported examples of novel ecteinascidin-renieramycin hybrid natural products. Renieramycin T (1) showed strong cytotoxicity to several human cancer cell lines, its IC₅₀ values ranging from 4.7 to 98 nM.     

Calculating the surface tension between a flat solid and a liquid: a theoretical and computer simulation study of three topologically different methods

We discuss three topologically different methods for calculating the surface tension between a flat solid and a liquid from theoretical and computer simulation viewpoints. The first method, commonly used in experiments, measures the contact angle at which a static droplet of liquid rests on a solid surface. We present a new analysis algorithm for this method and explore the effects of line tension on the contact angle. The second method, commonly used computer simulations, uses the pressure tensor through the virial in a system where a thick, infinitely extended slab of liquid rests on a solid surface. The third method, which is original to this paper and is closest to the thermodynamic definition of surface tension, applies to a spherical solid in contact with liquid in which the flat solid is recovered by extrapolating the sphere radius to infinity. We find that the second and third methods agree with each other, while the first method systematically underestimates surface tension values.