Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

PEGylated polyplex micelles from triblock catiomers with spatially ordered layering of condensed pDNA and buffering units for enhanced intracellular gene delivery

An A-B-C type triblock copolymer, tandemly aligning two types of polycations with different pKa values in a single polymer strand, was developed for the construction of novel polyplex micelles, satisfying a high DNA condensing ability as well as a proton buffering activity directed to elevating gene transfection. The micelle might feature the distinctive three-layered structure, where an inner polyplex layer of condensed pDNA with poly(l-lysine) (pKa approximately 9.4) as the C segment is successively wrapped with an intermediate layer of poly[(3-morpholinopropyl)aspartamide] (B segment) with a comparatively low pKa of approximately 6.2, to provide a buffering effect, and an outer PEG layer (A segment) as a biocompatible palisade.     

Synthesis, structure and thermal stability of fully hydrophobic porphyrin-DNA conjugates

The DNAs modified with tetraphenyl porphyrin at the center of 13mer oligonucleotide were synthesized using phosphoramidite chemistry and automated DNA synthesis. When the porphyrin modified oligonucleotide was annealed with its complementary strand, they formed a standard B-form duplex. The porphyrin moiety intercalated in the duplex, and moderately lowered the thermal stability.     

Theoretical calculation of structures and proton transfer in hydrated ammonia-hydrogen chloride clusters

Ab initio molecular orbital calculations have been performed to investigate the structures and quantum effects of the proton motion in NH(3):HCl:(H(2)O)(n) (n = 0-3) clusters using a MP2/aug-cc-pVDZ level of theory. Three new stable structures and one transition-state structure are investigated for these clusters. The detailed analyses of the intermolecular interactions suggest that three-body interactions play an important role to determine the relative stability in each size of cluster. The quantum effects of the proton motion result in frequency shifts for proton-stretching modes. Our one-dimensional and two-dimensional models fairly closely reproduce the experimental proton-stretching vibrational frequency of the NH(3):HCl cluster. The most stable isomer for n = 1 has a proton-transfer structure, which is weakened by the quantum effects of the proton motion.     

Development of a cooled He*(23S) beam source for measurements of state-resolved collision energy dependence of Penning ionization cross sections: Evidence for a stereospecific attractive well around methyl group in CH3CN

A low-temperature discharge nozzle source with a liquid-N(2) circulator for He*(2(3)S) metastable atoms has been developed in order to obtain the state-resolved collision energy dependence of Penning ionization cross sections in a low collision energy range from 20 to 80 meV. By controlling the discharge condition, we have made it possible to measure the collision energy dependence of partial ionization cross sections (CEDPICS) for a well-studied system of CH(3)CN+He*(2(3)S) in a wide energy range from 20 to 350 meV. The anisotropic interaction potential energy surface for the present system was obtained starting from an ab initio model potential via an optimization procedure based on classical trajectory calculations for the observed CEDPICS. A dominant attractive well depth was found to be 423 meV (ca. 10 kcal/mol) at a distance of 3.20 A from the center of mass of CH(3)CN in the N-atom side along the CCN axis. In addition, a weak attractive well (ca. 0.9 kcal/mol) surrounding the methyl group (-CH(3)) has been found and ascribed to the interaction between an unoccupied molecular orbital of CH(3)CN and 2s atomic orbital of He*(2(3)S).     

Domino allylation and cyclization of ortho-alkynylbenzaldehydes with allyltrimethylsilane catalyzed by Pd(II)-Cu(II) bimetallic systems

The reaction of ortho-alkynylated benzaldehydes 1 with allyltrimethylsilane under the Pd(OAc)₂-CuCl₂ catalyst system gave the isochromene derivatives 2 together with the chlorinated products 3. When the reaction was conducted in the presence of half equiv of H₂O, the formation of 3 was suppressed and 2 was obtained in good to high yields. When the reaction of 1a was carried out with trimethylsilylcyanide instead of allylsilane, the cyano group-substituted isochromene 9 was obtained in 94% yield.     

Power-free poly(dimethylsiloxane) microfluidic devices for gold nanoparticle-based DNA analysis

An extremely simple, power-free pumping method for poly(dimethylsiloxane)(PDMS) microfluidic devices is presented. By exploiting the high gas solubility of PDMS, the energy for the pumping is pre-stored in the degassed bulk PDMS, therefore no additional structures other than channels and reservoirs are required. In a Y-shaped microchannel with cross section of 100 microm width x 25 microm height, this method has provided flow rate of 0.5-2 nL s(-1), corresponding to linear velocity of 0.2-0.8 mm s(-1), with good reproducibility. As an application of the power-free pumping, gold nanoparticle-based DNA analysis, which does not rely on the cross-linking mechanism between nanoparticles, has been implemented in a microchannel with three inlets. Target 15mer DNA has been easily and unambiguously discriminated from its single-base substituted mutant. Instead of colorimetric detection in a conventional microtube, an alternative detection technique suitable for microdevices has been discovered-observation of deposition on the PDMS surfaces. The channel layout enabled two simultaneous DNA analyses at the two interfaces between the three laminar streams.     

AuCl(3)-catalyzed benzannulation: synthesis of naphthyl ketone derivatives from o-alkynylbenzaldehydes with alkynes

The reaction of o-alkynylbenzaldehydes 1 and alkynes 2 in the presence of a catalytic amount of AuCl3 in (CH2Cl)2 at 80 degrees C gave naphthyl ketone products in high yields. The AuCl3-catalyzed formal [4 + 2] benzannulation proceeds most probably through the coordination of the triple bond of 1 to AuCl3, the formation of benzo[c]pyrylium auric ate complex via the nucleophilic addition of the carbonyl oxygen atom, the Diels-Alder addition of alkynes 2 to the auric ate complex, and subsequent bond rearrangement. Similarly, the AuCl3-catalyzed reactions of o-alkynylacetophenone and o-alkynylbenzophenone with phenylacetylene afforded the corresponding naphthyl ketone products in good yields.     

Steady-state and nanosecond spectroscopic studies of triplet sensitized reaction of K-region arene oxides

Photorearrangement reactions of K-region arene oxides, 9,10-epoxy-9,10-dihydrophenanthrene (1a), 3-acetyl-9,10-epoxy-9,10-dihydrophenanthrene (1b), and 3,4-epoxy-3,4-dihydropyrene (1c) in dichloroethane (DCE) solution were investigated by steady irradiation and nanosecond transient spectroscopy. Photorearrangements producing substituted oxepins, 2 occur via the singlet excited state of these compounds, while the phenolic products, 9-hydroxyphenanthrene (3a), 3-acetyl-9-hydroxyphenanthrene (3b), and 4-hydroxypyrene (3c) are formed via the triplet state. Phenol 3 formation from the triplet 1 sensitized by the triplet 3 (i.e. product sensitization) is proposed for the photorearrangement reactions of 1a and 1c, and this process is the only way phenol (3a) is formed because of the negligible intersystem crossing probability of 1a. No product sensitization occurs in the photorearrangement reaction of 1b.     

Study of adsorption of methylene blue and new methylene blue in liquid-solid interface by slab optical waveguide spectroscopy

A slab optical waveguide (SOWG) has been used for study of adsorption of both methylene blue (MB) and new methylene blue (NMB) in liquid–solid interface. Adsorption characteristics of MB and NMB on both bare SOWG and silanized SOWG by octadecyltrichlorosilane (ODS) were compared. Effect of pH on adsorption on MB and NMB was investigated. Binding rate constant analysis showed that both MB and NMB on bare SOWG demonstrates larger association constants than those on ODS-SOWG. Interactions of MB and NMB on bare SOWG and ODS-SOWG were analyzed by molecular mechanics calculation method. The binding energy change was in the following order: E_NMB–bare > E_MB–bare > E_NMB–ODS > E_MB–ODS.