Adsorption of cadmium ions by wheat bran treated with pectinase

In this study, we investigated the surface properties of raw wheat bran (R-WB) and wheat bran treated with Pectinase PL (P-WB) to evaluating its efficacy for removal of cadmium from waste water. The concentration of cadmium ions adsorbed by them was evaluated. The concentration of carboxyl groups of R-WB (3.56 mmol/g) was greater than that of P-WB (2.11 mmol/g), which indicated that the pectin of R-WB was broken down, resulting in a decrease in the concentration of carboxyl groups due to the enzyme treatment. From the scanning electron microscope (SEM) images of P-WB, the pores were newly generated with enzyme treatment. The concentration of cadmium ions adsorbed onto R-WB was greater than that of cadmium ions adsorbed onto P-WB. These results show that the adsorption mechanism of cadmium ions onto R-WB and P-WB depends on the carboxyl groups of pectin.     

Theoretical study of oxidation of cyclohexane diol to adipic anhydride by [Ru(IV)(O)(tpa)(H2O)]2+ complex (tpa ═ tris(2-pyridylmethyl)amine)

The catalytic conversion of 1,2-cyclohexanediol to adipic anhydride by Ru(IV)O(tpa) (tpa ═ tris(2-pyridylmethyl)amine) is discussed using density functional theory calculations. The whole reaction is divided into three steps: (1) formation of α-hydroxy cyclohexanone by dehydrogenation of cyclohexanediol, (2) formation of 1,2-cyclohexanedione by dehydrogenation of α-hydroxy cyclohexanone, and (3) formation of adipic anhydride by oxygenation of cyclohexanedione. In each step the two-electron oxidation is performed by Ru(IV)O(tpa) active species, which is reduced to bis-aqua Ru(II)(tpa) complex. The Ru(II) complex is reactivated using Ce(IV) and water as an oxygen source. There are two different pathways of the first two steps of the conversion depending on whether the direct H-atom abstraction occurs on a C-H bond or on its adjacent oxygen O-H. In the first step, the C-H (O-H) bond dissociation occurs in TS1 (TS2-1) with an activation barrier of 21.4 (21.6) kcal/mol, which is followed by abstraction of another hydrogen with the spin transition in both pathways. The second process also bifurcates into two reaction pathways. TS3 (TS4-1) is leading to dissociation of the C-H (O-H) bond, and the activation barrier of TS3 (TS4-1) is 20.2 (20.7) kcal/mol. In the third step, oxo ligand attack on the carbonyl carbon and hydrogen migration from the water ligand occur via TS5 with an activation barrier of 17.4 kcal/mol leading to a stable tetrahedral intermediate in a triplet state. However, the slightly higher energy singlet state of this tetrahedral intermediate is unstable; therefore, a spin crossover spontaneously transforms the tetrahedral intermediate into a dione complex by a hydrogen rebound and a C-C bond cleavage. Kinetic isotope effects (k(H)/k(D)) for the electronic processes of the C-H bond dissociations calculated to be 4.9-7.4 at 300 K are in good agreement with experiment values of 2.8-9.0.     

Automatic polymerase chain reaction product detection system for food safety monitoring using zinc finger protein fused to luciferase

An automatic polymerase chain reaction (PCR) product detection system for food safety monitoring using zinc finger (ZF) protein fused to luciferase was developed. ZF protein fused to luciferase specifically binds to target double stranded DNA sequence and has luciferase enzymatic activity. Therefore, PCR products that comprise ZF protein recognition sequence can be detected by measuring the luciferase activity of the fusion protein. We previously reported that PCR products from Legionella pneumophila and Escherichia coli (E. coli) O157 genomic DNA were detected by Zif268, a natural ZF protein, fused to luciferase. In this study, Zif268–luciferase was applied to detect the presence of Salmonella and coliforms. Moreover, an artificial zinc finger protein (B2) fused to luciferase was constructed for a Norovirus detection system. In the luciferase activity detection assay, several bound/free separation process is required. Therefore, an analyzer that automatically performed the bound/free separation process was developed to detect PCR products using the ZF–luciferase fusion protein. By means of the automatic analyzer with ZF–luciferase fusion protein, target pathogenic genomes were specifically detected in the presence of other pathogenic genomes. Moreover, we succeeded in the detection of 10 copies of E. coli BL21 without extraction of genomic DNA by the automatic analyzer and E. coli was detected with a logarithmic dependency in the range of 1.0 × 10 to 1.0 × 10⁶ copies.     

Imaging the cell wall of living single yeast cells using surface-enhanced Raman spectroscopy

The surface of a living yeast cell (Saccharomyces cerevisiae strain W303-1A) has been labeled with silver (Ag) nanoparticles that can form nanoaggregates which have been shown to have surface-enhanced Raman scattering (SERS) activity. The cell wall of a single living yeast cell has been imaged by use of a Raman microspectroscope. The SERS spectra measured from different Ag nanoaggregates were found to be different. This can be explained on the basis of detailed spectral interpretation. The SERS spectral response originates from mannoproteins which cover the outermost regions of the yeast cell wall. Analysis of SERS spectra from the cell wall and the extracted mannoproteins from the yeast has been performed for the clarification of variation in SERS spectra.     

Enantioselective Total Synthesis of (−)‐Candelalides A,B and C: Potential Kv1.3 Blocking Immunosuppressive Agents

Potential immunosuppressive agents : Candelalides A, B and C (see figure), novel blockers of the voltage‐gated potassium channel Kv1.3, have been efficiently synthesized for the first time in a convergent and unified manner starting from (+)‐5‐methyl‐Wieland–Miescher ketone. The method explored has potential for preparing various types of candelalide analogues for the structure–activity relationship studies.

     

Thermal desorption counter‐flow introduction atmospheric pressure chemical ionization for direct mass spectrometry of ecstasy tablets

A novel approach to the analysis of ecstasy tablets by direct mass spectrometry coupled with thermal desorption (TD) and counter‐flow introduction atmospheric pressure chemical ionization (CFI‐APCI) is described. Analytes were thermally desorbed with a metal block heater and introduced to a CFI‐APCI source with ambient air by a diaphragm pump. Water in the air was sufficient to act as the reactive reagent responsible for the generation of ions in the positive corona discharge. TD‐CFI‐APCI required neither a nebulizing gas nor solvent flow and the accompanying laborious optimizations. Ions generated were sent in the direction opposite to the air flow by an electric field and introduced into an ion trap mass spectrometer. The major ions corresponding to the protonated molecules ([M + H]⁺) were observed with several fragment ions in full scan mass spectrometry (MS) mode. Collision‐induced dissociation of protonated molecules gave characteristic product‐ion mass spectra and provided identification of the analytes within 5 s. The method required neither sample pretreatment nor a chromatographic separation step. The effectiveness of the combination of TD and CFI‐APCI was demonstrated by application to the direct mass spectrometric analysis of ecstasy tablets and legal pharmaceutical products. Copyright © 2009 John Wiley & Sons, Ltd.     

5‐(1,2,3‐Triazol‐1‐yl)tetrazole Derivatives of an Azidotetrazole via Click Chemistry

N? C bonded (non‐bridged) 5‐(1,2,3‐triazol‐1‐yl)tetrazoles were synthesized by the Cu^I‐catalyzed 1,3‐dipolar azide–alkyne cycloaddition click reaction using 5‐azido‐N‐(propan‐2‐ylidene)‐1H‐tetrazole ( 1 ). For example, the click reaction of 1 in the presence of CuSO₄?5 H₂O and Na ascorbate at 65–70 °C for 48 h in CH₃CN/H₂O co‐solvent was found to be limited to only terminal alkynes that have electron‐withdrawing groups, CF₃C?CH ( 2 a ) and SF₅C?CH ( 2 b ), giving rise to isopropylidene‐[5‐(4‐trifluoromethyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 a ) and isopropylidene‐[5‐(4‐pentafluorosulfanyl‐1,2,3‐triazol‐1‐yl)tetrazol‐1‐yl]amine ( 3 b ) in 47 % and 66 % yields, respectively. When carried out under conditions using CuI and 2,6‐lutidine as catalysts at 0 °C for 13 h in CHCl₃, the click reaction was versatile toward alkynes even those having electron‐donating groups. Properties of new products were determined and compared with those of 1 . Heats of formation, detonation pressures, detonation velocities and impact sensitivities are reported for these new 5‐(1,2,3‐triazol‐1‐yl)tetrazoles.     

Calorimetry and cryo-transmission electron microscopic studies of PEG2000-grafted liposomes

The phase behavior of poly(ethylene glycol) grafted liposomes (PEG-liposomes) was investigated by differential scanning calorimetry (DSC), dynamic light scattering (DLS) and cryo-transmission electron microscopy (cryo-TEM). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamine with a covalently attached PEG molecular weight of 2000 (DSPE-PEG2000). From the results of DLS measurements, the coexistence of PEG-liposomes and small molecular assemblies were confirmed at mole fractions of DSPE-PEG2000 above about 0.1. Moreover, it was confirmed that small molecular assemblies were disk micelles by cryo-TEM. However, the phase transition enthalpies of PEG-liposomes were hardly changed according to the DSC measurement, though the mole fraction of the PEG lipid increased. From these results, it was suggested that the phase transition enthalpies hardly changed despite mixed micelles being formed because the bilayer structure of the disk micelle maintains high cooperativity between the DPPC molecules.     

Sliding behavior of water droplets on flat polymer surface

Flat films of methyl methacrylate-fluoroalkyl methacrylate copolymers were prepared, and their hydrophobicity was investigated. It was revealed that the F concentration directly affects the static hydrophobicity on the flat polymer surface in a systematic manner. Furthermore, the sliding behavior of a water droplet on these surfaces depends on the static hydrophobicity; the sliding motion changes from constant velocity to constant acceleration with an increase in the water contact angle.