Water barrier characteristics of plasma polymers of perfluorocarbons

Perfluorocarbon monomers such as C₂F₄, C₂F₆, C₄F₁₀, and mixtures thereof with H₂, were subjected to plasma polymerization and deposited onto low-density polyethylene (LDPE) substrates. The effect of plasma conditions, surface characteristics, and surface dynamics of plasma polymers on their ability to improve the resistance to water vapor permeation was investigated. An optimum discharge energy density was found for a monomer which provided the greatest reduction water vapor permeability. Although all of the plasma polymers show higher hydrophobicity than polyethylene, the reduction in water vapor permeability is not uniquely related to water contact angle. The surface-dynamic stability of a plasma polymer surface was found to be the key factor in determining the barrier performance of the plasma polymer. The extent of change of surface-configuration after water immersion strongly correlated with the improvement in the water vapor permeation resistance. Plasma polymers with the higher surface-dynamic stability provided the better water barrier coating applied on LDPE films. © 1996 John Wiley & Sons, Inc.     

Magnetically Enhanced 15 kHz Glow Discharge of Methane

This work deals with the luminous chemical vapour deposition (plasma polymerization) of hydrocarbon polymeric thin films in a magnetic field enhanced discharge of methane. The films were deposited on 4″ <111> single crystal silicon substrates. We investigated the influence of the different glow discharge parameters (e.g. pressure, flow rate, power input, etc.) on the deposition rate of methane and the refractive index of the resulting polymeric films, as well as the distribution of these parameters across the wafer. We used a Shinko Seiki Plasma Polymerization equipment with a bell jar reactor comprising two electrodes connected to a symmetric AC power supply of 15 kHz. Two magnetrons were formed by placing two circular shaped concentric magnetic poles behind each electrode. The substrates were attached on both sides of a rotating wheel held at a floating potential in the middle of the two electrodes. This equipment allowed us to vary a single parameter and keep the other parameters constant over the whole process. We measured the thickness and the refractive index and their distribution over the wafer. The effect of the system pressure, decoupled from the effect of flow rate, is explained by the characteristic nature of luminous gas phase and by the polymerization/deposition mechanism of luminous chemical vapour deposition.     

Mechanochromic Delayed Fluorescence Switching in Propeller-Shaped Carbazole–Isophthalonitrile Luminogens with Stimuli-Responsive Intramolecular Charge-Transfer Excited States

Herein, the universal design of high-efficiency stimuli-responsive luminous materials endowed with mechanochromic luminescence (MCL) and thermally activated delayed fluorescence (TADF) functions is reported. The origin of the unique stimuli-triggered TADF switching for a series of carbazole–isophthalonitrile-based donor–acceptor (D–A) luminogens is demonstrated based on systematic photophysical and X-ray analysis, coupled with theoretical calculations. It was revealed that a tiny alteration of the intramolecular D–A twisting in the excited-state structures governed by the solid morphologies is responsible for this dynamic TADF switching behavior. This concept is applicable to the fabrication of bicolor emissive organic light-emitting diodes using a single TADF emitter.     

Anti-Stokes Luminescence in Multi-Resonance-Type Thermally-Activated Delayed Fluorescence Molecules

Photon-upconversion in organic molecular systems is one of the promising technologies for future energy harvesting systems because these systems can generate excitons that possess higher energy than excitation energy. The photon-upconversion caused by absorbing ambient heat as additional energy is particularly interesting because it could ideally provide a light-driving cooling system. However, only a few organic molecular systems have been reported. Here, we report the anti-Stokes photoluminescence (ASPL) derived from hot-band absorption in a series of multi-resonance-type thermally-activated delayed fluorescence (MR-TADF) molecules. The MR-TADF molecules exhibited an anti-Stokes shift of approximately 0.1 eV with a high PL quantum yield in the solution state. The anti-Stokes shift corresponded well to the 1–0 vibration transition from the ground state to the excited singlet state, and we further evaluated a correlation between the activation energy for the ASPL intensity and the TADF process. Our demonstration underlines that MR-TADF molecules have become a novel class of ASPL materials for various future applications, such as light-driving cooling systems.     

Microcrystalline composite particles of carbon nanotubes and calcium carbonate

Coprecipitation of urea-melt modified carbon nanotubes and calcium carbonate from an aqueous solution by two methods yielded microcrystalline composite particles. Powders obtained by colloidal crystallization from a supersaturated solution that were isolated and dried soon after precipitation were a mixture of raspberry-shaped and rhombohedral particles. These were shown by infrared and X-ray diffraction analyses to be mainly calcite. Particles that were kept wet for 1 day or longer before being isolated were typically entirely rhombohedral with edge lengths in the range of 5-30 microm. Scanning electron microscopy investigations revealed that the nanotubes were adsorbed on the particle surface and also incorporated into the interior matrix. Removal of the calcium carbonate component by treating the particles with acid yielded nanotube shells whose size and shape reflected those of the original particles.     

Iron-catalysed green synthesis of carboxylic esters by the intermolecular addition of carboxylic acids to alkenes

Iron triflate, in situ-formed from FeCl3 and triflic acid, or FeCl3 and silver triflate efficiently catalyse the intermolecular addition of carboxylic acids to various alkenes to yield carboxylic esters; the reaction is applicable to the synthesis of unstable esters, such as acrylates.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

From tetragermacyclobutene to tetragermacyclobutadiene dianion to tetragermacyclobutadiene transition metal complexes

The reaction of 3,4-dichlorotetragermetene derivative 2 with Na(2)[Fe(CO)(4)] in THF produced a (tetragermacyclobutadiene)tricarbonyliron complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]Fe(CO)(3)4, which has a slightly folded Ge(4) ring perhaptocoordinated to the Fe center. Structural and spectral characteristics of 4 show a remarkable π-donating ability of the tetragermacyclobutadiene ligand toward the transition metal, surpassing that of tetrasilacyclobutadiene and cyclobutadiene ligands. Reduction of 2 with KC(8) resulted in exclusive formation of the dipotassium salt of the tetragermacyclobutadiene dianion derivative 3(2-)·[K(+)(thf)(2)](2), representing a rare example of a 6π-electron compound that, on the basis of its structural and magnetic properties, was recognized as a nonaromatic species. Reaction of 3(2-)·[K(+)(thf)(2)](2) with CpCoI(2)(PPh(3)) produced a (cyclopentadienyl)(tetragermacyclobutadiene)cobalt complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]CoCp 7, as the first example of a sandwich compound featuring an all-germanium-containing cyclic polyene ligand.     

Hydrogels of poly(hydroxyethyl methacrylate) and hydroxyethyl methacrylate—glycerol monomethacry-late copolymers

Hydrophilic three-dimensional polymer networks (hydrogels) were prepared from hydroxyethyl methacrylate (HEMA) and the copolymer HEMA and glycerol monomethacrylate (GMMA). The equilibrium water content of the hydrogels in water was investigated as a function of the initial dilution of the polymerization mixture, the type of solvent, and the hydrophilicity of the polymer. The initial dilution was found to have a decisive effect on the swelling or deswelling of hydrogels after the completion of the gel formation. With relatively less hydrophilic hydrogels, there is a critical initial dilution to produce the gel which does not swell or deswell in water after the gel formation. This “isovolumic” initial dilution shifts toward a higher dilution as the hydrophilicity of the hydrogels increases; however, when hydrophilicity of the polymer rises above a certain point, gels always swell in water. Permeability of oxygen through hydrogels was also studied.     

Geographical distribution of plutonium derived from the atomic bomb in the eastern area of Nagasaki

In order to know the distribution of plutonium derived from the Nagasaki atomic bomb, soil samples were measured to determine the ²⁴⁰Pu/²³⁹Pu isotope ratio of and concentrations of ^239+240Pu and ¹³⁷Cs. The ^239+240Pu concentrations in soils, except for Nishiyama area, were close to the average concentration of soil collected in Japan. In soils collected at the Nishiyama area and at the eastern area of Nagasaki Prefecture and at part of northern area in Kumamoto Prefecture, the ²⁴⁰Pu/²³⁹Pu ratios were lower than the global fallout values. This suggests that plutonium from the atomic bomb was deposited in the eastern area from the hypocenter reaching up to 100 km eastwards.