Ion–ion interactions of LiPF6 and LiBF4 in propylene carbonate solutions

Self-diffusion coefficients of Li⁺ D_Li⁺, PF₆⁻ D_PF6⁻ and solvent propylene carbonate (PC) D_PC in LiPF₆−PC solutions were determined at 298 K by the pulse gradient spin echo (PGSE) NMR technique over the salt concentration range of 0.1–3.0 M (M = mol dm^– 3). The order of the diffusion coefficients was found to be D_Li⁺ < D_PF6⁻ < D_PC over the concentration range examined, and they were monotonically decreased with increasing the salt concentration. Haven ratio Λ/Λ_NMR, where Λ and Λ_NMR represent the ionic conductivity measured electrochemically and that estimated via the Nernst-Einstein equation using the diffusion coefficient, respectively, was evaluated as the measure of the ion–ion interaction in the LiPF₆–PC solutions. Though Λ/Λ_NMR values for LiPF₆-solutions decrease with increasing the salt concentration, they were greater than those for LiBF₄–PC solutions over the whole concentration range examined, which indicates that the ion pair formation ability of PF₆^– ion is weaker than that of the BF₄^– ion. The smaller value of the ionic conductivity for the highly concentrated LiPF₆–PC solution (above 2.0 M) than that of the LiBF₄-solutions can be attributed to the more rapidly increased viscosity relative to the LiBF₄-solution. Classic molecular dynamics (MD) simulations for the respective LiPF₆ and LiBF₄-solution of 0.5 and 1.0 M were also carried out based on the effective pair potentials. Diffusion coefficients, ionic conductivity and Haven ratio for these solutions were calculated from MD trajectories, and they qualitatively agree with those evaluated by experiments. Pair correlation functions g_LiO(r) (for Li⁺–O (PC) pair) and g_LiPF6(r) (for Li⁺–PF₆^– pair) or g_LiBF4(r) (for Li⁺–BF₄^– pair) revealed that the lithium ion weakly forms the contact ion pairs with PF₆^–, whilst strongly with BF₄^–, which supports the present experimental results. Moreover, the simulation results show that both anions in the contact ion pairs predominantly take the monodentate form, which is in contrast to the multidentate coordination predicted by ab initio calculation in gas phase.     

Synthesis of dinuclear palladium complexes having two parallel isocyanide ligands,and their application as catalysts to pyrrole formation from tert-butylisocyanide and alkynes

Novel dinuclear palladium complexes having two isocyanide ligands were synthesized by using a binucleating ligand, N,N′-bis[2-(diphenylphsphino)phenyl]formamidinate (dpfam). The structure of [Pd₂(μ-dpfam)(tert-BuNC)₂]Cl was confirmed by X-ray analysis, showing that the Pd–Pd bond length of 2.5824(3) Å falls well within the range of those for known dipalladium complexes having the edge-sharing structure and two isocyanides coordinate to palladium in almost parallel and in close proximity. The dinuclear complex [Pd₂(μ-dpfam)(tert-BuNC)₂]PF₆ served as catalyst for pyrrole formation from tert-butylisocyanide and various alkynes.     

Toward an accurate numerical simulation of radiation hydrodynamics in laser ablation plasmas

A radiation hydrodynamics code has been developed for more accurate prediction of laser-produced low-density ablation plasmas with appropriately describing anisotropic radiation field by using Monte-Carlo technique for variable Eddington tensor with reasonable computational loads. The Eddington tensor estimated by thousand of sample particles per single fluid step can reproduce the anisotropic radiation field in the low-density region and will not result in large computational consumption. Prediction of the emitted light from ablation plasma can be corrected by the proposed method. Ablation structure sustained by a compact radiation source, which is sometimes found in experiments of collisionless shock relevant to laboratory astrophysics, may also be changed by anisotropic transfer computation in optically thin region.     

Titania supported copper catalysts for methanol synthesis from carbon dioxide

The effect of co-catalyst (ZnO or ZrO₂) has been tested for hydrogenation of CO₂ on CuO/TiO₂ and CuO/Al₂O₃. CuO−ZnO/TiO₂ catalyst showed the highest activity for methanol synthesis. Kinetic parameters were also determined.     

Low-temperature synthesis of niobium oxide nanoparticles from peroxo niobic acid sol

A peroxo niobic acid sol was prepared by peptization of the niobic acid precipitate (Nb2O5.nH2O) with a H2O2 aqueous solution. Crystallized Nb2O5 nanoparticles and niobic acid nanoparticles were obtained by heating the peroxo niobic acid sol. When peroxo niobic acid sol prepared by peptization of the niobic acid precipitate ([NH3]=0.3 mol/l) was heated at 348 K for 1 week, Nb2O5 nanoparticles with a diameter of 4.5 nm and a S(BET) of 275 m2/g were obtained. When peroxo niobic acid sol prepared by peptization of the niobic acid precipitate ([NH3]=1 mol/l) was heated at 348 K for 1 week, niobic acid nanoparticles with a diameter of less than 2 nm were obtained. The pore structure and degree of crystallinity of the nanoparticles prepared by heating the peroxo niobic acid sol greatly depended on the concentration of the ammonia solution used for preparing the niobic acid precipitate.     

Synthesis of organic‐inorganic hybrid gels by means of thiol‐ene and azide‐alkene reactions

Organic–inorganic hybrid gels have been synthesized from a multi‐vinyl functional cyclic siloxane, 1,3,5,7‐tetravinyltetramethylcyclotetrasiloxane (TVMCTS), or a cubic silsesquioxane, octavinyloctasilasesquioxane (PVOSS), and α,ω‐dithiol compounds, 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), using thiol‐ene reaction in toluene. The network structure of the resulting gels, mesh size and mesh size distribution, was quantitatively characterized by means of a scanning microscopic light scattering (SMILS). The gels obtained from TVMCTS‐HDT formed homogeneous network structure with 1.5–1.6 nm mesh. Relaxation peaks derived from large clusters and/or micro gels were detected in the SMILS analysis of the TVMCTS‐DDT, PVOSS‐HDT, and PVOSS‐DDT gels besides those from the small meshes. The organic–inorganic hybrid gels were also synthesized from TVMCTS, PVOSS with α,ω‐diazide compounds, 1,6‐hexanediazide (HDA), 1,10‐decanediazide (DDA), using azide‐alkene reaction in toluene. All the gels obtained with the azide‐alkene reaction formed the homogeneous network structure. Enthalpy relaxation at the glass transition of the dried samples was detected by differential scanning calorimetry to study the network uniformity of the original gels. The gels synthesized by the azide‐alkene reaction showed larger enthalpy than the gels synthesized by the thiol‐ene reaction, indicating homogeneous network structure in the former gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2229–2238     

Characterization of homoionic Fe-type montmorillonite: Potential chemical species of iron contaminant

Fe²⁺-montmorillonite with Fe²⁺ ions occupying cation exchange sites is an ideal transformation product in bentonite buffer material. In our previous study on preparation and characterization of Fe²⁺-montmorillonite, the montmorillonite sample that adsorbed Fe²⁺ ions on almost all of the cation exchange sites was prepared using a FeCl₂ solution under an inert gas condition [N. Kozai, Y. Adachi, S. Kawamura, K. Inada, T. Kozaki, S. Sato, H. Ohashi, T. Ohnuki, T. Banba, J. Nucl. Sci. Technol. 38 (2001) 1141]. In view of the unstable nature of iron(II) chemical species, this study attempted to determine the potential contaminant iron chemical species in the sample. Nondestructive elemental analysis revealed that a small amount of chloride ions remained dispersed throughout the clay particles. The chloride ion retention may be due to the adsorption of FeCl⁺ ion pairs in the initial FeCl₂ solution and the subsequent containment of the Cl⁻ ions that are dissociated from the FeCl⁺ ion pairs during excess salt removal treatment. Two explanations are advanced for the second process: the slow release of the remaining Cl⁻ ions from the collapsed interlayer of the montmorillonite, and the transformation of a minor fraction of the remaining FeCl⁺ ion pairs to iron(III) hydroxide chloride complexes having low solubility.     

Sorption of Pu(IV) on biogenic Mn oxide and complexation of Pu(IV) with organic ligands secreted by fungal cells

Journal of Radioanalytical and Nuclear Chemistry - We investigated the sorption of Pu(IV) on biogenic Mn oxide, composed of Mn(IV) oxide and hyphae, produced by Mn(II)-oxidizing fungus. The...