Experimental validation of distinct element simulation for dynamic wheel–soil interaction

The deformation behaviour of the soil during dynamic wheel–soil interaction was studied by using the discontinuum modelling technique, distinct or discrete element method (DEM). The simulation model was developed using DEM for two types of soil, soil-A (coarse sand) and soil-B (medium sand). A transparent sided soil bin was used to observe the soil deformation. Three CCD video camera photographic images of the validation experiments were analyzed and compared with the simulation program results.This paper presents the simulation and validation results for two types of soil at three different vertical loadings of 4.9, 9.8 and 14.7 N. Wheel sinkage, vertical and horizontal draft force acting on the rigid wheel and the soil deformation images from the validation experiments were some of the data used to compare the simulation program results with the validation experiments. The simulation program was helpful to understand the complex deformation behaviour of the soils. The simulated results for the deformation behaviour of soil-B showed better correlation with the validation experiments than soil-A. The results obtained have also been compared with the previous work on DEM to explain phenomena such as the high simulated sinkage of the rigid wheel.     

Synthesis of hollow CaCO3 nanospheres templated by micelles of poly(styrene-b-acrylic acid-b-ethylene glycol) in aqueous solutions

An asymmetric triblock copolymer, poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG), was synthesized via reversible addition-fragmentation chain transfer controlled radical polymerization. Micelles of PS-b-PAA-b-PEG with PS core, PAA shell, and PEG corona were then prepared in aqueous solutions, followed by extensive characterization based on dynamic light scattering, zeta-potential, and transmission electron microscopy (TEM) measurements. The well-characterized micelles were used to fabricate hollow nanospheres of CaCO(3) as a template. It was elucidated from TEM measurements that the hollow nanospheres have a uniform size with cavity diameters of ca. 20 nm. The X-ray diffraction analysis revealed a high purity and crystallinity of the hollow nanospheres. The hollow CaCO(3) nanospheres thus obtained have been used for the controlled release of an anti-inflammatory drug, naproxen. The significance of this study is that we have overcome a previous difficulty in the synthesis of hollow CaCO(3) nanospheres. After mixing of Ca(2+) and CO(3)(2-) ions, the growth of CaCO(3) is generally quite rapid to induce large crystal, which prevented us from obtaining hollow CaCO(3) nanospheres with controlled structure. However, we could solve this issue by using micelles of PS-b-PAA-b-PEG as a template. The PS core acts as a template that can be removed to form a cavity of hollow CaCO(3) nanospheres, the PAA shell is beneficial for arresting Ca(2+) ions to produce CaCO(3), and the PEG corona stabilizes the CaCO(3)/micelle nanocomposite to prevent secondary aggregate formation.     

Highly photoluminescent nanocrystals based on a gold(I) complex and their electrophoretic patterning

The fabrication of nanocrystals (NCs) composed of the cationic Au(I) complex was demonstrated by the reprecipitation method in which the colloidal solution of the NCs showed brilliant green phosphorescence with a quantum yield of 83% in n-hexane. Characterization of the prepared NCs was performed by transmission electron microscopy observation and elemental analysis with energy-dispersive X-ray spectroscopy. The obtained Au(I) NCs were particles of random shapes with a diameter of 200-400 nm. The selected-area electron diffraction and X-ray diffraction measurements showed the characteristic diffraction patterns attributable to the crystal structure of the bulk crystal of the Au(I) complex. A similar method was performed with a different counteranion, leading to a colloidal solution of the microcrystals (MCs) with brilliant yellow phosphorescence and a quantum yield of 26% in n-hexane. Luminescence patterning of the NCs and MCs was also achieved successfully by electrophoretic deposition onto an indium tin oxide (ITO)-coated glass substrate, resulting in characteristic luminescence patterns on the ITO substrates with relatively high photoluminescence quantum yields.     

Interlaboratory study of DNA extraction from multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR for individual kernel detection system of genetically modified maize

In many countries, the labeling of grains, feed, and foodstuff is mandatory if the genetically modified (GM) organism content exceeds a certain level of approved GM varieties. We previously developed an individual kernel detection system consisting of grinding individual kernels, DNA extraction from the individually ground kernels, GM detection using multiplex real-time PCR, and GM event detection using multiplex qualitative PCR to analyze the precise commingling level and varieties of GM maize in real sample grains. We performed the interlaboratory study of the DNA extraction with multiple ground samples, multiplex real-time PCR detection, and multiplex qualitative PCR detection to evaluate its applicability, practicality, and ruggedness for the individual kernel detection system of GM maize. DNA extraction with multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR were evaluated by five laboratories in Japan, and all results from these laboratories were consistent with the expected results in terms of the commingling level and event analysis. Thus, the DNA extraction with multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR for the individual kernel detection system is applicable and practicable in a laboratory to regulate the commingling level of GM maize grain for GM samples, including stacked GM maize.     

Precise control and consecutive modulation of spin transition temperature using chemical migration in porous coordination polymers

Precise control of spin transition temperature (T(c)) is one of the most important challenges in molecular magnetism. A Hofmann-type porous coordination polymer {Fe(pz)[Pt(II)(CN)(4)]} (1; pz = pyrazine) exhibited cooperative spin transition near room temperature (T(c)(up) = 304 K and T(c)(down) = 284 K) and its iodine adduct {Fe(pz)[Pt(II/IV)(CN)(4)(I)]} (1-I), prepared by oxidative addition of iodine to the open metal sites of Pt(II), raised the T(c) by 100 K. DSC and microscopic Raman spectra of a solid mixture of 1-I and 1 revealed that iodine migrated from 1-I to 1 through the grain boundary after heating above 398 K. We have succeeded in precisely controlling the iodine content of {Fe(pz)[Pt(CN)(4)(I)(n)]} (1-In; n = 0.0-1.0), which resulted in consecutive modulation of T(c) in the range 300-400 K while maintaining the hysteresis width. Furthermore, it was demonstrated that iodine migration in the solid mixture was triggered by the spin transition of 1-I. The magnetically bistable porous framework decorating guest interactive open-metal-site in the pore surface makes it possible to modulate T(c) ad arbitrium through unique postsynthetic method using iodine migration.     

Effects of Temperature and Mobile Phase Condition on Chiral Recognition of Poly(l-phenylalanine) Chiral Stationary Phase

Characteristics of the chiral stationary phase with poly(l-phenylalanine) peptide selector, which was in ??-helical state, was reported. Since environmental factors affect peptide conformation, the changes in enantioselectivity were examined depending on column temperature and mobile phase conditions (ionic strength, pH, mobile phase composition). Column temperature and pH drastically affected the enantioselectivity. Based on these changes, the relation between chiral recognition and secondary structure of the peptide selector was discussed. The column stability during sequential analysis under different separation conditions was also evaluated.     

Mechanoluminescent light source for a fluorescent probe molecule

We have demonstrated an innovative ability of mechanoluminescent (ML) material as a light source for the first time. By appropriate smart size control and nondestructive mechanical stimulation, the ML particle can be considered a promising candidate of in situ light source for bio-imaging and photo-therapy even in a human body.     

Preparation and Acid‐Responsive Photophysical Properties of T‐Shaped π‐Conjugated Molecules Containing a Benzimidazole Junction

T‐shaped π‐conjugated molecules with an N‐methyl‐benzimidazole junction have been synthesized and their acid‐responsive photophysical properties owing to the change in the π‐conjugation system are discussed. T‐shaped π‐conjugated molecules consist of two orthogonal π‐conjugated systems including a phenyl thiophene extended from the 2‐position and alkyl phenylenes connected through various π‐spacers from the 4,7‐positions of the N‐methyl‐benzimidazole junction. The π‐spacers, such as thiophene, ethyne, and ethane, have an effect on the acid response of photophysical properties in terms of changes in conformation, excited‐state energy and charge‐transfer (CT) characteristics. In particular, the π‐conjugated molecule with ethynyl spacers exhibited a marked redshift in the fluorescence spectrum with a large Stokes shift upon the addition of acid, whereas the other molecules showed substantial quenching. The redshift in emission was studied in detail by temperature‐dependent fluorescence measurements, which indicated the transition to a CT state over the finite activation energy at the excited state. The change in the frontier molecular orbitals upon acid addition was further discussed by means of DFT calculations.     

Crystal structure and mixed-valence state in 1′,1‴-dibutylbiferrocenium triiodide

In 1′, 1‴-dibutylbiferrocenium triiodide crystals A show temperature-independent trapped-valence state, while crystals B show a valence-delocalization of the mixed-valence state. The mixed-valence states of both crystals are discussed in relation to their crystal structures. Address after October 1991: Department of Chemistry, Faculty of Science, Hiroshima University, Kagamiyama, Higashi-Hiroshima 724, Japan