Multigap superconductivity in sesquicarbides La2C3 and Y2C3

A complex structure of the superconducting order parameter in Ln2C3 (Ln=La,Y) is demonstrated by muon spin relaxation measurements in their mixed state. The muon depolarization rate sigma v(T)] exhibits a characteristic temperature dependence that can be perfectly described by a phenomenological double-gap model for nodeless superconductivity. While the magnitude of two gaps is similar between La2C3 and Y2C3, a significant difference in the interband coupling between those two cases is clearly observed in the behavior of sigma v(T).     

Visible-Light-Induced Heptacene Generation under Ambient Conditions: Utilization of Single-crystal Interior as an Isolated Reaction Site

The photo-induced generation of unstable molecules generally requires stringent conditions to prevent oxidation and the concomitant decomposition of the products. The visible-light-induced conversion of two heptacene precursors to heptacene was studied. Single crystals of bis- and mono-α-diketone-type heptacene precursors ( 7-DK2 and 7-DK1 , respectively), were prepared to investigate the effect of precursor structure on reactivity. The photoirradiation of a 7-DK2 single crystal cleaved only one α-diketone group, forming an intermediate bearing a pentacene subunit, while that of a 7-DK1 single crystal gave rise to characteristic absorption peaks of heptacene and their increase in intensity with photoirradiation time, indicating the generation of heptacene without decomposition. Heptacene production was not observed when the precursors were photoirradiated in solution, implying that the single crystal interior provided isolation from the external environment, thus preventing heptacene oxidation.     

GaAs LPE growth and its application to FET

Residual impurities and deep levels in the LPE GaAs layers grown by a sliding boat method were studied. Residual impurities were investigated by monitoring oxygen and water vapor contents in the exhaust gas during heat treatment. The results are satisfactorily explained by assuming oxygen as a dominant residual impurity. Electron traps with a density higher than 5 × 10¹² cm^-3 were not observed in the LPE layers, whereas in VPE layers, 0.82 eV electron traps were always observed. LPE double layers (high purity buffer layer and active layer) were fabricated into FET's. GaAs FET's with a 1 μm gate showed no hysteresis loops in the I–V characteristics and had fairly good high-frequency characteristic (f_max = 70 GHz, NF = 2.4 dB at 10.4 GHz).     

Novel method for obtaining homogeneous giant vesicles from a monodisperse water-in-oil emulsion prepared with a microfluidic device

A novel technique called the "lipid-coated ice droplet hydration method" is presented for the preparation of giant vesicles with a controlled size between 4 and 20 microm and entrapment yields for water-soluble molecules of up to about 30%. The method consists of three main steps. In the first step, a monodisperse water-in-oil emulsion with a predetermined average droplet diameter between 4 and 20 microm is prepared by microchannel emulsification, using sorbitan monooleate (Span 80) and stearylamine as emulsifiers and hexane as oil. In the second step, the water droplets of the emulsion are frozen and separated from the supernatant hexane solution by precipitation, followed by a removal of the supernatant and followed by the replacement of Span 80 by using a hexane solution containing egg yolk phosphatidylcholine, cholesterol, and stearylamine (5:5:1, molar ratio). This procedure is performed at -10 degrees C to keep the water droplets of the emulsion in a frozen state and thereby to avoid extensive water droplet coalescence. In the third step, hexane is evaporated at -4 to -7 degrees C and an external water phase is added to the remaining mixture of lipids and water droplets to form giant vesicles that have an average size in the range of that of the initial emulsion droplets (4-20 microm). The entrapment yield and the lamellarity of the vesicles obtained depend on the lipid/water droplet ratio and on the composition of the external water phase. At high lipid/water droplet ratio, the giant vesicles have a thicker membrane (indicating multilamellarity) and a higher entrapment yield than in the case of a low lipid/water droplet ratio. The highest entrapment yield ( approximately 35%) is obtained if the added external water phase contains preformed unilamellar egg phosphatidylcholine vesicles with an average diameter of 50 nm. The addition of these small vesicles minimizes the water droplet coalescence during the third step of the vesicle preparation, thereby decreasing the extent of release of water-soluble molecules originally present in the water droplets. The GVs prepared can be extruded through polycarbonate membranes to yield large unilamellar vesicles with about 100 nm diameter. This size reduction, however, leads to a decrease in the entrapment yield to about 12% due to solute leakage from the vesicles during the extrusion process.     

Lipid-packaged linear iron(II) triazole complexes in solution: controlled spin conversion via solvophobic self-assembly

Linear Fe(II) 1,2,4-triazole complexes with lipid counteranions are newly developed. These complexes show sharp and reversible spin conversion in toluene, with temperatures significantly higher (by 20-100 K) than the spin crossover temperatures observed in the crystalline states. This is accounted for in terms of increased metal-ligand interactions in organic media, which is caused by solvophobic compaction of charged coordination chains. In atomic force microscopy, developed nanowires are observed for low spin (LS) complexes. On the other hand, fragmented nanostructures are seen for high spin (HS) complexes, indicating that the spin conversion in solution is governed by a self-assembly process. The lipid packaging of charged coordination chains thus provides powerful means to improve and regulate their functions via solvophobic self-assembly.     

Estimation of single-nucleotide polymorphism allele frequency by alternately binding probe competitive polymerase chain reaction

A modified solvent microextraction with back extraction method (SME/BE) combined with high performance liquid chromatography and fluorescence detection (HPLC-FD) was developed for the determination of citalopram in human plasma. Extraction process was performed in a home-made total glass vial without using a teflon ring, usually employed in SME/BE. Citalopram was first extracted from 0.5 mL of plasma, modified with sodium hydroxide, into hexane. Back extraction step was then performed into 5.2 μL of 45 mM ammonium formate solution (pH 4) using a GC microsyringe. The extract was subsequently transferred into a liner-like vial and then injected into the HPLC system. An enrichment factor of 150 along with a good sample clean-up was obtained. The calibration curve showed linearity in the range of 1.0–130.0 ng mL⁻¹ with regression coefficient corresponding to 0.992. This range covers therapeutic window and even lower amounts which is important in pharmacokinetic studies. Limits of detection and quantification, based on a signal to noise ratio (S/N) of 3 and 10, were 0.3 and 0.8 ng mL⁻¹, respectively. The method was also applied for the determination of citalopram in plasma samples after oral administration of 40 mg single dose of citalopram.     

Synthesis and applications of novel fluorinated dendrimer-type copolymers by the use of fluoroalkanoyl peroxide as a key intermediate

Fluoroalkanoyl peroxide reacted with 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (TTRV-Si) to afford fluoroalkyl end-capped oligomers containing some unreacted vinyl segments under very mild conditions. Fluoroalkyl end-capped cyclosiloxane oligomers containing some vinyl segments thus obtained reacted with N,N-dimethylacrylamide and fluoroalkanoyl peroxide to afford new fluorinated dendrimer-type block copolymers in good isolated yield. Similar reactions were also occurred by the use of 1,3,5-trivinyl-1,3,5-trimethylcyclotrisiloxane instead of TTRV-Si, and the corresponding fluorinated dendrimer-type block copolymer was obtained in good isolated yield. These fluorinated dendrimer-type block copolymers had an excellent solubility not only in water but also in traditional organic solvents including aliphatic fluorinated solvents. Interestingly, these fluorinated block copolymers were found to form the self-assembled dendrimer-type polymeric aggregates in aqueous solutions. More interestingly, these fluorinated block copolymers had an extremely higher dispersion ability of not only single-walled carbon nanotube and fullerenes but also magnetic nanoparticles into water, compared to that of the corresponding two fluoroalkyl end-capped oligomers.     

Structure and dewetting behavior of polyhedral oligomeric silsesquioxane-filled polystyrene thin films

Polyhedral oligomeric silsesquioxane (POSS) meets increasing interest as a building unit for inorganic-organic hybrid materials. The incorporation of cyclopentyl-substituted POSS (CpPOSS) into polystyrene (PS) thin films led to an inhibition of dewetting. In this paper, the dispersion state of CpPOSS in the CpPOSS/PS hybrid films and, furthermore, the relationships between the structure and dewetting inhibition effect are discussed. Structural analysis of the hybrid films revealed that CpPOSS segregated to the film surface and crystallized. The segregation of CpPOSS to the surface changes the surface free energy and spreading coefficient of the film. Interfacial structure was also roughened by the segregation of CpPOSS, which can contribute to the inhibition of dewetting by pinning the contact line of the PS film with the substrate. The inhibition of dewetting can be attributed to the modification of the film surface and interface by the segregation of CpPOSS.     

Quenching treatment for improvement of nonlinear optical response time in high-χ CuCl-doped glasses

Quenching treatments were performed on CuCl microcrystallite-doped glasses prepared by a melting method. Radiative decay time measurement and χ⁽³⁾ measurement for the quenched glasses were performed using ps and ns laser. The glasses showed that the radiative decay time were shortened by one order of magnitude without a decrease of third-order nonlinear susceptibility χ⁽³⁾ after the quenching treatment from above 300°C. The distorted structure of CuCl microcrystallites quenched from high temperature was considered to be most effective for the shortening of the lifetime of Z₃ exciton.     

Ring expansion of isopropenyldihydrofuran derivatives

Lactonization of 2‐(hydroxymethyl)‐5‐isopropenyl‐4,5‐dihydrofuran‐3‐carboxylic acids 1a,b,c with dicyclohexylcarbodiimide gave the corresponding furano‐lactones, 5‐isopropenyl‐5,6‐dihydro‐1(3H)‐furo[3,4‐b]furanone 2a,b,c , which were readily converted to the corresponding oxepino‐lactones, 6‐methyl‐5,8‐dihydro‐1(3H)‐furo[3,4‐b]oxepinone 3a,b,c by respective thermal ring expansions.