Separate Polarization Modes Synchronization and Synchronization Switches between Vertical-Cavity Surface-Emitting Lasers

For vertical-cavity surface-emitting lasers (VCSELs) with polarization-rotated feedback, there exist several synchronization types such as synchronizations between total powers and synchronizations between separate polarization modes. Based on the two-mode rate equations, we study and compare numerically the performances of different synchronization types. Our results show that three synchronization types exhibit good performances when their synchronization conditions are satisfied. They are the complete synchronization between total powers, complete synchronization between x-polarized modes, and generalized synchronization between x-polarized and y-polarized modes. The former two types are sensitive to the injection rate and spontaneous emission, while the third type is contrary. Synchronization type with the best performance may switch from one to another, with changing of injection rate and spontaneous emission factor.     

Natural beam focusing of non-axisymmetric guided waves in large-diameter pipes

The propagation of non-axisymmetric guided waves in larger diameter pipes is studied in this paper by treating the guided waves as corresponding Lamb waves in an unwrapped plate. This approximation leads to a simpler method for calculating the phase velocities of hollow cylinder guided waves, which reveals a beam focusing nature of non-axisymmetric guided waves generated by a partial source loading. The acoustic fields in a pipe generated by a partial-loading source includes axisymmetric longitudinal modes as well as non-axisymmetric flexural modes. The circumferential distribution of the total acoustic field, also referred as an angular profile, diverges circumferentially while guided waves propagate with dependence on such factors as mode, frequency, cylinder size, propagation distance, etc. Exact prediction of the angular profile of the total field can only be realized by numerical calculations. In particular cases, however, when the wall thickness is far less than the cylinder diameter and the wavelength is smaller than or comparable to the pipe wall thickness, the acoustic field can be analyzed based on the characteristics of Lamb waves that travel along a periodic unwrapped plate. Based on this assumption, a simplified model is derived to calculate the phase velocities of non-axisymmetric flexural mode guided waves. The model is then applied to discussions on some particular characteristics of guided-wave angular profiles generated by a source loading. Some features of flexural modes, such as cutoff frequency values are predicted with the simpler model. The relationship between the angular profiles and other factors such as frequency, propagation distance, and cylinder size is obtained and presented in simple equations. The angular profile rate of change with respect to propagation distance is investigated. In particular, our simplified model for non-axisymmetric guided waves predicts that the wave beam will converge to its original circumferential shape after the wave propagates for a certain distance. A concept of "natural focal point" is introduced and a simple equation is derived to compute the 1st natural focal distance of non-axisymmetric guided waves. The applicable range of the simplified equation is provided. Industrial pipes meet the requirement of wall thickness being far less than the pipe diameter. The approximate analytical algorithms presented in this paper provides a convenient method enabling quick acoustic field analysis on large-diameter industrial pipes for NDE applications.     

Determination of Trace Mercury by Solid Substrate-Room Temperature Phosphorimetry Quenching Method Based on Catalytic Effect of Hg2+on Formation of the Ion Association Complex [Sn(XO)6]4+·[(Fin)4]

A new method for the determination of trace mercury by solid substrate-room temperature phosphorimetry (SS-RTP) quenching method has been established. In glycine-HCl buffer solution, xylenol orange (XO) can react with Sn⁴⁺ to form the complex [Sn(XO)₆]⁴⁺. [Sn(XO)₆]⁴⁺ can interact with Fin⁻ (fluorescein anion) to form the ion associate [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which can emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM). Hg²⁺ can catalyze H₂O₂ oxidizing the ion association complex [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which causes the RTP to quench. The ΔIp value is directly proportional to the concentration of Hg²⁺ in the range of 0.016–1.6 fg spot⁻¹ (corresponding concentration: 0.040–4.0 pg ml⁻¹, 0.40 μl spot⁻¹), and the regression equation of working cure is ΔIp=10.03+83.15 m Hg²⁺ (fg spot⁻¹), (r=0.9987, n=6) and the detection limit (LD) is 3.6 ag spot⁻¹(corresponding concentration: 9.0×10^–15 g ml⁻¹, the sample volume: 0.4 μl). This simple, rapid, accurate method is of high selectivity and good repeatability, and it has been successfully applied to the determination of trace mercury in real samples. The reaction mechanism for catalyzing H₂O₂ oxidizing the ion association complex ([Sn(XO)₆]⁴⁺·[(Fin)₄]⁻) SS-RTP quenching method to determine trace mercury is also discussed.     

Theoretical models for the extracavity Raman laser with crystalline Raman medium

The rate equation model of an extracavity Raman laser is deduced for the first time to the best knowledge of the authors. The normalized radiation transfer equations of the extracavity Raman laser are given. The normalized radiation transfer equations and rate equations were solved numerically to find the optimum reflectivity of the output coupler to realize the maximum conversion efficiency at the first Stokes for both the single and double-pass pumping configurations. Also, the pulse duration of the first Stokes was investigated numerically. The rate equations are verified to be a good approximation to the radiation transfer equations for the regime of low Raman gain and long pump pulse duration. Furthermore, it is found that the optimum reflectivity of the first Stokes and the second Stokes threshold are influenced significantly by the minor feedback of the resonator mirror at the second Stokes. PACS 42.55 42.55.Ye; 42.65 42.65.Dr; 02.60 02.60.Lj; 63.20 63.20.-e     

Synthesis of single-crystalline wurtzite aluminum nitride nanowires by direct arc discharge

High-density hexagonal aluminum nitride (h-AlN) nanowires were synthesized through the direct reaction of Al with nitrogen gas without catalyst and template using a direct arc discharge method. The as-grown AlN nanowires were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The h-AlN nanowires have a diameter in the range 20–70 nm and a length of several tens of micrometers. Vapor–solid growth mechanisms can be employed to explain the formation of the h-AlN nanowires. PACS 81.05.Ea; 81.10.Bk; 81.16.Dn; 68.65.-k; 81.16.-c     

On-line matrix addition for detecting aerosol particles

Single aerosol particles were measured by matrix-assisted laser desorption/ionization (MALDI) with an aerosol time-of-flight mass spectrometer (ATOFMS). The inlet to the ATOFMS was coupled with an evaporation/condensation flow cell that allowed matrix addition by condensation onto the particles. The coated particles entered the ion source through three-stage differentially pumped capillary inlet and were then ionized by a focused 266 nm Nd:YAG laser. The mass spectra and aerodynamic size of the single particles can be obtained simultaneously. The on-line matrix addition technique makes it possible to identify biological aerosols in real-time.     

非晶态合金Fe80P20局域结构和性质的量子化学研究

利用原子簇模型Fe_4P简化了非晶态合金Fe_(80)P_(20)的局域结构,设计了四方锥、三角双锥、四面体及平面五边形等十几种构型,对其二、四重态分别进行密度泛函(DFT)优化计算,经过频率验证,获得五种稳定构型。从所得优化构型的键长和键级,可以发现原子簇Fe4P较好地反映了非晶态合金Fe_(80)P_(20)的局域结构。考察了各构型间的过渡转化情况,发现二重态构型的稳定性要好于四重态。分析各构型的能量、成键及电子转移情况,发现与P原子成键的Fe原子个数对这些性质影响较为明显。与P原子成键的Fe原子个数越多,体系的能量就越低,越容易存在；P原子的得电子能力随着与其成键Fe原子个数增多而减少,甚至会将失去自身电子转移到金属原子上。同时通过3d轨道布居数,讨论了原子簇的空穴数及磁学性质。     

F+H2→HF+H反应的全量子态分辨的散射动力学研究

利用高灵敏度的氢原子里德堡飞渡时间谱方法研究了 F H_2→HF H 反应碰撞能在5.02kJ/mol 下的交叉分子束反应态态散射动力学.所有在时间飞渡谱中被观测到的谱峰可以归属为 HF 产物的振转态结构.还观测到了明显的 HF(v’=3)前向散射,以及少许的 HF(v’=2)前向散射.     

基于超分子结构共掺杂纳米复合薄膜的制备与荧光特性

为改善功能分了的特性,提出一种基于金属纳米粒子-偶氮染料复合物共掺杂超分子结构功能材料的设计新方法.并依照此方法制备出复合材料,观测了其显微结构,测量了其紫外-可见光吸收,研究了该超分子结构复合体系的荧光特性.实验发现,由于金属银纳米粒子的掺杂,使得超分子结构复合体系中功能分子甲基橙在溶液态体系的荧光强度增强近5倍,而在两种不同结构(共混结构和包覆结构)的薄膜态超分子结构体系中,其荧光强度分别被猝灭15%和20%.研究结果表明,复合膜中采用超分子结构完全能够改善功能分子的特性.     

D→Klv～l衰变过程的研究

用光锥QCD求和规则研究D→Klv～_l衰变过程，首先计算D→K跃迁形状因子，通过构造新的关联函数，消除了twist-3波函数的不确定性给计算结果所带来的影响，从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致. 关键词： QCD光锥求和规则 D介子半轻衰变 分支比 形状因子