Multi-modal calculations of prompt fission neutrons from 238U（n,f） at low induced energy

Properties of prompt fission neutrons from ²³⁸U(n, f) are calculated for incident neutron energies below 6 MeV using the multi-modal model, including the prompt fission neutron spectrum, the average prompt fission neutron multiplicity, and the prompt fission neutron multiplicity as a function of the fission fragment mass υ(A) (usually named “sawtooth” data) The three most dominant fission modes are taken into account. The model parameters are determined on the basis of experimental fission fragment data. The predicted results are in good agreement with the experimental data.     

Cascade-exciton model analysis of level density parameter dependence in proton induced fission cross sections of some sub-actinide nuclei

Fission cross sections strongly depend on the ratio of the level density parameter in fission to neutron emission, a_f/a_n. In this work, a cascade-exciton model implemented in the code CEM95 has been used to observe this effect for proton induced fission cross sections of tungsten, lead and bismuth. The method was employed using different level density parameter ratios for each fission cross section calculation. The calculated fission cross sections are compared with the available experimental data in the literature. It has been observed that a change of the ratio of the level density parameter, a_f/a_n, is necessary with the incident energy of the proton, to best estimate the fission cross sections in CEM95.     

Study on induced radioactivity of China Spallation Neutron Source

China Spallation Neutron Source (CSNS) is the first High Energy Intense Proton Accelerator planned to be constructed in China during the State Eleventh Five-Year Plan period, whose induced radioactivity is very important for occupational disease hazard assessment and environmental impact assessment. Adopting the FLUKA code, the authors have constructed a cylinder-tunnel geometric model and a line-source sampling physical model, deduced proper formulas to calculate air activation, and analyzed various issues with regard to the activation of different tunnel parts. The results show that the environmental impact resulting from induced activation is negligible, whereas the residual radiation in the tunnels has a great influence on maintenance personnel, so strict measures should be adopted.     

Preparation of a silicon micro-strip nuclear radiation detector by a two-step annealing process

The annealing process for boron implantation is a crucial step during large size nuclear radiation detector fabrication. It can reduce the lattice defects and the projection straggling. A two-step annealing process for boron implantation was developed instead of a one-step annealing process, and the reverse body resistance of a silicon micro-strip detector was significantly increased, which means that the performance of the detector was improved.     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.     

Effects of the δ meson on the direct Urca processes in neutron stars

In the framework of the relativistic mean field theory, the effects of the δ meson on the direct Urca (DURCA) processes are investigated. In a neutron star, the DURCA processes involving nucleons, Λ and Ξ^- can take place while the process involving the Ξ⁰ can not. With the inclusion of the δ meson, the threshold densities for the DURCA processes become lower. With the δ included, the threshold neutron star mass for the DURCA process among nucleons and electrons becomes smaller while the threshold masses for the processes involving hyperons become larger. When the δ meson is included, the total neutrino emissivity remarkably increases in the density range of 0.32--0.41 fm^-3. The total neutrino luminosity increases with the neutron star mass first and then decreases. The neutrino luminosity gets larger with the inclusion of the δ meson. The cooling of the EXO0748-676 is sensitive to the isovector scalar interaction.     

Fast computation of observed cross section for ψ′ → PP decays

It has been conjectured that the relative phase between strong and electromagnetic amplitudes is universally -90° in charmonium decays. ψ′ decaying into a pseudoscalar pair provides a possibility to test this conjecture. However, the experimentally observed cross section for such a process is depicted by the two-fold integral, which takes into account the initial state radiative (ISR) correction and energy spread effect. Using the generalized linear regression approach, a complex energy-dependent factor is ...     

Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design

The construction of China Spallation Neutron Source (CSNS) has been initiated in Dongguan, Guangdong, China. Thus a detailed radiation transport analysis of the shutter neutron beam stop is of vital importance. The analyses are performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method. The target of calculations is to optimize the neutron beamline shielding design to guarantee personal safety and minimize cost. Successful elimination of the primary ray effects via the two-dimensional uncollided flux and the first collision source methodology is also illustrated. Two-dimensional dose distribution is calculated. The dose at the end of the neutron beam line is less than 2.5 μSv/h. The models have ensured that the doses received by the hall staff members are below the standard limit required.     

Design and end chamfer simulation of PEFP beam line curved dipole magnets

The design, fabrication and field measurement of 11 DC curved dipole magnets for the PEFP Beam Line have been completed. In this paper, a design method for a complex end chamfer using OPERA-3D is proposed. The conventional method for estimating chamfer shape is extended and applied to a curved dipole magnet by a coordinate transformation. Using the interface with CAD software, the complex end chamfer is modeled and fully determined by 3D simulation to meet the field uniformity requirement. The magnetic field measurement results are in good agreement with the simulation. The design considerations, field simulation results, end chamfer development process and measurement results are presented in detail.     

GENERALIZED OPERATORS AND OPERATOR-VALUED DISTRIBUTIONS IN QUANTUM FIELD THEORY

The relation between generalized operators and operator-valued distributions is discussed so that these two viewpoints can be used alternatively to explain quantum fields.