Molecular structure of 1,2,4-triazole

The molecular structure of 1,2,4-triazole has been determined by gas phase electron diffraction. The intemuclear distances and bond angles were obtained by applying a least-squares analysis to the experimental intensity. The bond distances (r_g) and bond angles were N₁-N₂ = 1.380 ± 0.010 Å, N₂C₃ = 1.329 ± 0.009 Å, C₃-N₄ = 1.348 ± 0.009 Å, N₁-C₅ = 1.377 ± 0.004 Å, N₄C₅ = 1.305 Å (calculated value). N-H = 0.990 Å, C-H = 1.054 Å, ∠N₁N₂C₃ = 102.7± 0.5°, ∠N₂C₃N₄ = 113.8 ± 1.3°, ∠N₂N₁C₅ = 108.9 ± 0.8°, ∠H₁N₁N₂ = 110.9°, ∠H₂C₃N₄ = 119.2°, ∠H₃C₅N₁ = 131.0°, ∠C₃N₄C₅ = 105.7° (calculated value) and ∠N₄C₅N₁ = 108.7° (calculated value).     

Chloro­bis­(thio­urea‐κS)copper(I) bis(4,5‐di­aza­fluoren‐9‐one) mono­hydrate

The title compound, [CuCl(CH₄N₂S)₂]·2C₁₁H₆N₂O·H₂O, consists of mol­ecules of a Cu^I–thio­urea complex, free 4,5‐di­aza­fluoren‐9‐one (dafone) and crystalline water. The planar complex mol­ecule has trigonal coordination geometry around the Cu^I atom. The dafone and water mol­ecules, which are hydrogen bonded to the Cu^I complex, are approximately coplanar with this complex. The crystal displays a sheet structure and π–π stacking is observed between neighbouring sheets.     

甲醛与乙醛,甲醚,硝基甲烷相互作用的从头算研究

用6-31G、全构型优化,研究了甲醛与乙醛、甲醚、硝基甲烷的相互作用。结果表明所有超分子稳定构型都包含2个C—H—O氢键的平面环状结构。H—O距离为0.228～0.264 nm,作用能为—19～—24 kJ/mol,与二聚水的作用能接近。稳定性主要取决于甲基上取代基Y吸电子能力以及环状结构中氢键张力。STO-3G不很适用于研究这类分子的相互作用。     

Oxidative Addition vs. Ligand-Exchange: Fe(II)-Mixed-Phenylchalcogenolate Complexes fac-[PPN][Fe(CO)3(TePh)n(SePh)3-N] (n = 1, 2)

Diphenyldichalcogenides (PhE)₂ (E = Te, Se) react with Fe(0)-phenylchalcogenolate [PPN] [PhEFe(CO)₄] to yield the products of oxidative addition, Fe(II)-mixed-phenylchalcogenolate fac- [PPN][Fe(CO)₃(TePh)_n(ScPh)_3-n] (n = 1, 2). Reactions of [PPN][REFe(CO)₄] (E=Se, R=Me; E=S, R=Et) and diphenyldichalcogenides yielded ligand-exchange products [PPN][PhEFe(CO)₄] (E=Te, Se, S). The compounds [Fe(CO)₃(TePh)(ScPh)₂]^? (l) and [Fe(CO)₃(TePh)₂ (2) crystallize in the isomorphous monoclinic space group C_2/e, with a = 32.035(8), b = 11.708(6), c = 28.909(6) Å, Z = 8, R = 0.048, and R_w = 0.044 (1); with a = 32.089(5), b= 11.745(2), c = 28.990(8) Å, Z = 8, R = 0.048, and R_w = 0.048 (2). The complexes 1 and 2 crystallize as discrete cations of PPN⁺ and anions of [Fe(CO)₃(TcPh)_u(ScPh)_3-n] (n=1, 2), and one half solvent molecule THF. The geometry around Fe(II) is a distorted octahedron with three carbonyl groups and three phenylchalcogenolate ligands occupying facial positions.     

Unsymmetrical linear pentanuclear nickel string complexes: [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3))

The one-electron oxidized linear pentanuclear nickel complexes [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) (1) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3)) (2) have been synthesized by reacting the neutral compound [Ni(5)(tpda)(4)Cl(2)] with the corresponding silver salts. These compounds have been characterized by various spectroscopic techniques. Compound 1 crystallizes in the monoclinic space group P2(1)/n with a = 15.3022(1) A, b = 31.0705(3) A, c = 15.8109(2) A, beta = 92.2425(4) degrees, V = 7511.49(13) A(3), Z = 4, and compound 2 crystallizes in the monoclinic space group C2/c with a = 42.1894(7) A, b = 17.0770(3) A, c = 21.2117(4) A, beta = 102.5688(8) degrees, V = 14916.1(5) A(3), Z = 8. X-ray structural studies reveal an unsymmetrical Ni(5) unit for both compounds 1 and 2. Compounds 1 and 2 show stronger Ni-Ni interactions as compared to those of the neutral compounds.     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Enhanced and selective adsorption of mercury ions on chitosan beads grafted with polyacrylamide via surface-initiated atom transfer radical polymerization

Enhanced and selective removal of mercury ions was achieved with chitosan beads grafted with polyacrylamide (chitosan-g-polyacrylamide) via surface-initiated atom transfer radical polymerization (ATRP). The chitosan-g-polyacrylamide beads were found to have significantly greater adsorption capacities and faster adsorption kinetics for mercury ions than the chitosan beads. At pH 4 and with initial mercury concentrations of 10-200 mg/L, the chitosan-g-polyacrylamide beads can achieve a maximum adsorption capacity of up to 322.6 mg/g (in comparison with 181.8 mg/g for the chitosan beads) and displayed a short adsorption equilibrium time of less than 60 min (compared to more than 15 h for the chitosan beads). Coadsorption experiments with both mercury and lead ions showed that the chitosan-g-polyacrylamide beads had excellent selectivity in the adsorption of mercury ions over lead ions at pH < 6, in contrast to the chitosan beads, which did not show clear selectivity for either of the two metal species. Mechanism study suggested that the enhanced mercury adsorption was due to the many amide groups grafted onto the surfaces of the beads, and the selectivity in mercury adsorption can be attributed to the ability of mercury ions to form covalent bonds with the amide. It was found that adsorbed mercury ions on the chitosan-g-polyacrylamide beads can be effectively desorbed in a perchloric acid solution, and the regenerated beads can be reused almost without any loss of adsorption capacity.     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.     

RE(CCl_3COO)_3(Phen)_2·nH_2O混配配合物的合成、性质及晶体结构

利用水和乙醇混合溶剂合成了稀土三氯醋酸盐与2份1,10-邻菲绕啉(phen)配合物RE(CCl_3COO)_3(phen)_2·nH_2O(RE=Nd,Sm,n=0;RE=Eu,n=2)的单晶.结构测定表明,Nd(CCl_3COO)_3(phen)_2为三斜晶系,每个三氯醋酸盐均以双齿配位,2个phen亦为双齿配位,故配位单元中钕为10配位;Eu(CCl_3COO)_3(phen)_2·2H_2O为单斜晶系,1个三氯醋酸根在外界,2个三氯醋酸根为单齿配位,2个phen为双齿配位,另有2分配位水,故配位单元中Eu为8配位.     

A novel Fe（OH）3/TiO2 nanoparticles and its high photocatalytic activity

A very simple and controllable approach was proposed to synthesize novel Fe(OH)_3/TiO_2 nanoparticles.Compared with neat TiO2,the Fe(OH)_3/TiO_2 increased the rate of the photocatalytic degradation of methyl orange at pH 6.0 by more than five times, showing photocatalytic activity as excellent as P25.This enhancing effect is mainly attributed to the ferric hydroxide deposits as the electron scavenger and the enriched surface hydroxyl groups.