Vapor‐Phase Reaction of Citronellal over Mesoporous Molecular Sieves MCM‐41 and Zeolites

The vapor‐phase reaction of citronellal (CTN) at 220 °C and atmospheric pressure has been studied using mesoporous molecular sieves and zeolites in a fixed‐bed reactor. The primary products included isopulegol (IPG), menthone, and pulegol with subsequent reactions to form cyclic hydrocarbons. The CTN conversion and the product selectivity depend on the acidity and the textural property of catalysts. Lewis and/or Brönsted acid sites are essential for catalyzing this reaction. An increase of SiO₂/Al₂O₃ mol ratio diminishes the acid amount of all catalysts and enhances both the surface area and the structural order of MCM‐41. The catalytic activity follows the order of MCM‐41 > HZSM‐5 > Hβ > USY, in accordance with the relative total acid amount except that of MCM‐41. Despite its low acidity, Si‐MCM‐41 exhibits the best catalytic performance due to its uniform mesopores, large surface area and good stability; the CTN conversion and the IPG yield attain 91.9% and 58.6%, respectively, after at least 25 h time‐on‐stream.     

Energetics of the Preyssler anion's molecular orbitals: quantifying the effect of the encapsulated-cation's charge

The ground state electronic properties of metal-exchanged Preyssler heteropolyoxoanions [M(n+)P(5)W(30)O(110)](n-15), in which the encapsulated M(n+) ions are the spherical, diamagnetic ions Na(+), Ca(2+), Sr(2+), Y(3+), La(3+) and Th(4+), are studied using a combination of electrochemical, optical, and NMR experiments. We have designed experiments that focus on the influence of the charge (n) of the encapsulated cations, which themselves have no redox response, and its effect upon the W-O framework MOs. As n increases, the cluster anions accept electrons into their LUMOs with increasing ease, and their lowest-energy LMCT bands reveal a corresponding blue shift, which is indicative of an increase of the LUMO-HOMO energy splitting with increasing n. (183)W NMR spectra are used to identify the atomic origin of the LUMO states, which are shown to be composed primarily of orbitals from the ring of 5 W atoms near M(n+). The cation charge correlates directly and linearly with the half-wave potentials of the first redox couples, the LMCT band energies, and the W chemical shifts. We have combined this suite of experimental results to construct an energy level diagram of the frontier MOs for the Preyssler cluster anions. In so doing, we provide a fundamental perspective that is not otherwise available on the cation's role with specific regard to the electronic behavior of the W-O orbitals. These results are expected to provide benchmarking information as theorists begin to study these large POM systems.     

Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

Conformational and Configurational Determination in 1,1,4,4-Tetrafluoro-2-Propylidene-3-Methyl-6-Tert-Butyl-1,4-Disila-5-Cyclohexene

A complete assignment of the ¹H, ¹³C and ¹⁹F NMR spectra of 1,1,4,4-tetrafluoro-2-propylidene-3-methyl-6-tert-butyl-1,4-disila-5-cyclohexene 3, the product of the cycloaddition reaction between tetrafluorodisilacyclobutene 1 and cis, trans-2,4-hexadiene mediated by (n⁵-C₅H₅)Mn(CO)₃, has been made by means of various 2D NMR chemical shift correlation methods and selective heteronuclear decoupling techniques. An analysis of the three bond ¹³C-¹H coupling constants and two bond ¹³C-¹⁹F coupling constants and the molecular modeling results enabled the determination of the conformation and configuration of compound 3. The conformation of 3 provides insight into mechanistic details of the Mn-mediated cycloaddition.     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

水-乙醇二元体系共沸混合物的热力学研究

用全自动低温绝热量热计测定了水、乙醇以及水和乙醇组成的共沸混合物在不同温区的摩尔热容Cp,m. 建立了共沸混合物Cp,m与温度T的函数关系.结果表明,水和乙醇组成的共沸混合物在98.496 K发生玻璃态转化,在158.939 K 和270.95 K发生固-液相变.获得了其相应的相变焓和相变熵.计算了以298.15 K为基准的该共沸混合物的热力学函数和超额热力学函数.     

ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

Adsorption Kinetic Characteristics of H2S on Activated Carbon

This study compared H₂S adsorption kinetic parameters in both grain adsorption and column adsorption systems. Results indicated that when the nondimensional mass transfer parameter for adsorption column design was included, the axial dispersion (Pe > 1, < 1) and external film resistance (B 1) could be neglected, the fluid viscosity effect was small (Sc = 0.76), and the adsorbate affinity was fine (). Surface and pore diffusion controlled the adsorbent and fluid mass transfer. In addition, spent activated carbon could be treated by a thermal process and then impregnated with NaOH. After the pretreatment, the spent activated carbon could be used for H₂S adsorption. Furthermore, we also propose that the H₂S adsorption reaction on the carbon is due to the formation of sulfur crystals.     

A molecular docking model of SARS-CoV S1 protein in complex with its receptor, human ACE2

The exact residues within severe acute respiratory syndrome coronavirus (SARS-CoV) S1 protein and its receptor, human ACE2, involved in their interaction still remain largely undetermined. Identification of exact amino acid residues that are crucial for the interaction of S1 with ACE2 could provide working hypotheses for experimental studies and might be helpful for the development of antiviral inhibitor. In this paper, a molecular docking model of SARS-CoV S1 protein in complex with human ACE2 was constructed. The interacting residue pairs within this complex model and their contact types were also identified. Our model, supported by significant biochemical evidence, suggested receptor-binding residues were concentrated in two segments of S1 protein. In contrast, the interfacial residues in ACE2, though close to each other in tertiary structure, were found to be widely scattered in the primary sequence. In particular, the S1 residue ARG453 and ACE2 residue LYS341 might be the key residues in the complex formation.     

Sinulochmodins A-C, three novel terpenoids from the soft coral Sinularia lochmodes

An unprecedented C,C-linked dimeric norcembranoid (sinulochmodin A, 1), a novel isocembranoid (sinulochmodin B, 2), and a novel yonarane norditerpenoid (sinulochmodin C, 3) were isolated from the soft coral Sinularia lochmodes. The structures of these metabolites were elucidated by extensive spectroscopic analysis and on the basis of the absolute structures of two related norditerpenoids (4 and 5), which were determined for the first time by a modified Mosher method. A plausible pathway for the biosynthesis of 1 and 3-5 from 2 was postulated. [structure: see text]