环中环结构谐振腔中的耦合谐振透明特性研究

在考虑耦合器插入损耗的情况下,理论分析了环中环结构谐振腔的耦合谐振透明效应.利用迭代法推导了整个结构的透过系数和有效相移,从而得到考虑了插入损耗的该结构的色散.研究表明,整个结构的有效相移,群速度和带宽,可通过耦合器的插入损耗、环中环结构中环与环周长之间的倍数以及环的个数来控制,这在旋转传感、光学时延线、光缓存、滤波等方面的应用有重要意义. 关键词： 环中环结构 耦合谐振透明 色散 慢光     

SiC缓冲层对Si表面生长的ZnO薄膜结构和光电性能的改善

用脉冲激光沉积(PLD)技术制备了ZnO/SiC/Si和 ZnO/Si薄膜并制成了紫外探测器。利用X射线衍射(XRD),光致发光(PL)谱,I-V曲线和光电响应谱对薄膜的结构和光电性能进行了研究。实验结果表明:SiC缓冲层改善了ZnO薄膜的结晶质量和光电性能,其原因可能是SiC作为柔性衬底能够减少ZnO与Si 之间大的晶格失配和热失配导致的界面缺陷和界面态。     

混合工质扩散吸收制冷系统初步实验研究

本文研究了一种混合工质扩散吸收制冷循环,在带溶液泵的循环实验装置上,以R23/R32/R134a为混合制冷剂,He为扩散气体,DMF(二甲基甲酰胺)为吸收剂,进行了实验研究。结果表明,高压侧混合制冷剂在回热器中进一步被低压侧混合制冷剂冷却,使其在更低的温度下液化并与He扩散蒸发,可以实现较低的蒸发温度。中间沸点组分R32可以改善系统的制冷性能,有利于较低蒸发温度的实现。本文提出的水平蛇形套管换热器用作扩散吸收系统回热器是可行的,但还需进一步改进回热器的结构,提高加工工艺和安装精度。     

High-power ultraviolet 278 nm laser from fourth-harmonic generation of a Nd:YAG laser in CsB3O5

We demonstrate a high-power UV 278 nm laser by fourth-harmonic generation (FHG) of a 1112 nm Nd:YAG laser in a nonlinear optical (NLO) crystal CsB3O5 (CBO) for the first time, to our best knowledge. A 30 W level diode-pumped Q-switched Nd:YAG laser at 1112 nm with beam quality factor M2=1.2 was used as the fundamental light source at a pulse width of 500 ns. With an LiB3O5 crystal, the 1112 nm laser was first frequency-doubled to 556 nm with an average output power of 13.5 W. It was then frequency doubled again in a CBO crystal to obtain the FHG output at 278 nm. The maximum average output power of the 278 nm laser is up to 1.5 W. The results demonstrated that CBO crystal is a promising NLO material for UV high-power lasers below 300 nm.     

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

A coupler is proposed to interface a hybrid dielectric-loaded plasmonic waveguide (HDLPW) with a silicon photonic slab waveguide. The HDLPW is firstly designed and optimized to attain the best tradeoff between the mode confinement and the propagation distance. The designed coupler is inspired from the taper configuration and numerically modeled through finite-difference time-domain (FDTD) simulation. The results demonstrate that a high confinement and low loss of the energy is achieved from a silicon photonic slab waveguide into the dielectric slot of area 50×200 nm² in the HDLPW. The transmission attained through the coupler with a compact size of 400 nm is found to be as high as 80% (1 dB). Further, the planar nature of taper configuration makes the coupler easy to fabricate using the state-of-the-art CMOS facilities. The proposed coupler is useful in enabling the integration between photonic and hybrid plasmonic waveguides and thus realizing on-chip hybrid integrated circuits.     

硫酸海胆内容物多糖化学结构的质谱法研究

将海胆内容物硫酸多糖XB-3进行脱硫得到多糖XB-3D,分别对XB-3和XB-3D进行甲基化,对脱硫前后的部分甲基化糖进行气相色谱-质谱测定,通过质谱分析法得出XB-3和XB-3D的结构信息,包括其主链和支链的构成、连接方式、硫酸基取代位置和结构模型。     

Microstructure and dielectric properties of PMN–PT ceramics prepared by the molten salts method

The sintering characteristic and dielectric properties of 0.67PMN–0.33PT ceramics prepared by the molten salt synthesis (MSS) method were investigated. PMN–PT particles synthesized by MSS with smaller grain size and good dispersion could lower the sintering temperature of ceramics; PMN–PT ceramics with relative density above 96% could be obtained in the range 1150–1180 °C. The molten salts species could significantly affect the microstructure and properties of MPN-PT ceramics. In the range 1100–1200 °C, PMN–PT ceramics from the sulfate flux MSS powders showed intergranular fracture, but that from the chloride flux MSS powder showed transgranular fracture. At the same sintering condition, the properties of PMN–PT ceramics from the powders prepared in the chloride flux are better than that from the powders prepared in the sulfate flux, their maximum dielectric constant ε_max≈29,385 and piezoelectric constant d₃₃≈660 pC/N. The above results demonstrated that PMN–PT ceramics prepared by the molten salts method possessed excellent piezoelectric and dielectric properties.     

一氧化碳血红蛋白的一阶导数光谱测定法

研究血液中碳氧血红蛋白浓度在连二亚硫酸钠还原前后导数光谱的变化,建立血液中碳氧血红蛋白的565nm一阶导数光谱定量测定方法。方法在0—100%范围内线性关系良好,不同浓度的平均回收率99.9%。结果表明,本方法准确快速、结果令人满意。