Synthesis of fluorinated imines and carbodiimides from azides via aza-Wittig reaction

The Staudinger reaction of fluoroalkylazides were studied. A series of N-fluoroalkylimines were synthesized via aza-Wittig reaction of N-fluoroalkyliminophosphoranes. The N,N′-difluoroalkylated carbodiimide was also synthesized via the reaction of N-fluoroalkyliminophosphoranes with carbon dioxide or carbon disulfide.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

波束开角对多普勒测频结果的影响*

具有不同波束开角的声学多普勒测速设备未标定的测速结果存在偏差。基于水底椭圆散射模型研究了波束开角对声学多普勒测速结果的影响,对提高声学测速性能具有实际意义。水底椭圆散射模型下,足印上不同方位传播损失和散射强度存在差异,导致频谱不对称,测频结果偏小。利用不对称系数量化频谱不对称程度,若波束开角增大,方位不对称系数随之增大,测频偏差增大,推导了波束开角导致的测频偏差解析式。分析仿真和外场试验数据测频结果可知,不同多普勒频移下测频偏差和理论计算值相符,不同波束开角下实际测频偏差与理论公式计算的测频偏差均随波束开角增大而增大。     

Facile Synthesis of Tricyclic 1,2,4-Oxadiazolines-Fused Tetrahydro-Isoquinolines from Oxime Chlorides with 3,4-Dihydroisoquinoline Imines

A mild and efficient strategy for the synthesis of tricyclic 1,2,4-oxadiazolines-fused tetrahydro-isoquinolines derivatives via [3 + 2] cycloaddition reaction is reported. The reactions provided the functionalized tricyclic 1,2,4-oxadiazolines in high yields (up to 96%). This protocol is simple and easy to handle. Moreover, a gram-scale experiment further highlights the synthetic utility. The chemical structure of the product was determined by X-ray single-crystal structure analysis. A possible mechanism for this transformation is proposed to explain the reaction process.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

Isolation of a carbon nanohoop with M(o)bius topology

Carbon nanohoop,a class of constrained molecular architecture consisting of linked arene units,has attracted considerable interest from both experimental and th...     

A MALDI-MS sensing chip prepared by non-covalent assembly for quantitation of acid phosphatase

A novel sensing chip was designed for MALDI-MS quantitation of acid phosphatase(ACP).The ACP sensing chip was constructed through non-covalent interaction of streptavidin and biotin for the assembly of biotinylated peptide substrate on biotinylated polyethylene-glycol(PEG)modified indium-tin oxide(ITO)slide.In the presence of ACP,the peptide substrate was dephosphorylated under acidic condition to generate a new mass signal.The quantitative assay of ACP was achieved with the mass signal ratio of product to the sum of product and left peptide substrate.Under optimal detection conditions,the ratio was linearly correlated with the concentration of ACP in the range of 0.05–12 g/L with a detection limit(LOD)of 0.04 g/L.The designed ACP sensing chip has been used to analyze ACP in complex clinical samples,which exhibited high selectivity,good repeatability,and admirably anti-interference ability.This work further demonstrates the concept of MS sensing and the application of MALDI-MS in quantitative analysis,and provides a convenient method for the quantitation of proteases in clinical diagnosis.     

Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials

As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.