Using the diphosphanyl radical as a potential spin label: effect of motion on the EPR spectrum of an R1(R2)P--PR1 radical

The EPR spectrum of the novel radical Mes*(CH3)P--PMes* (Mes*=2,4,6-(tBu)3C6H2) was measured in the temperature range 100-300 K, and was found to be drastically temperature dependent as a result of the large anisotropy of the 31P hyperfine tensors. Below 180 K, a spectrum of the liquid solution is accurately simulated by calculating the spectral modifications due to slow tumbling of the radical. To achieve this simulation, an algorithm was developed by extending the well-known nitroxide slow-motion simulation technique for the coupling of one electron spin to two nuclear spins. An additional dynamic process responsible for the observed line broadening was found to occur between 180 K and room temperature; this broadening is consistent with an exchange between two conformations. The differences between the isotropic 31P couplings associated with the two conformers are shown to be probably due to an internal rotation about the P--P bond.     

The relation between the molecular weight and intrinsic viscosity of polymethyl acrylate

Summary A series of unfractionated and fractionated samples of polymethyl acrylate of different low molecular weights have been prepared by homogeneous solution. polymerization in dimethyl formamide in presence of , '-azo-(-cyano-n-valeric acid) as initiator under a variety of conditions. The number-average molecular weights have been determined by end-group titrations and vapour pressure osmometry. The following []-M relationships for polymethyl acrylate have been obtained.[] = 33.5 x 10^–5M^0.63 for unfractionated samples in benzene at 25 °C. [] = 3.89 x 10^–5M^0.843 for fractionated samples in benzene at 35 °C.With 2 tables     

Use of organophosphorus extractants impregnated on silica gel for the extraction chromatographic separation of minor actinides from high level waste solutions

Silica-gel has been used as an inert support for the extraction chromatographic separation of actinides and lanthanides from HNO₃ and synthetic high level waste (HLW) solutions. Silica-gel was impregnated with tri-butyl phosphate (TBP), to yield STBP; 2-ethylhexyl phosphonic acid, mono 2-ethylhexyl ester (KSM-17, equivalent to PC-88A), SKSM; octyl(phenyl)-N,N-diisobutyl carbamoylmethylphosphine oxide (CMPO), SCMPO; and trialkylphosphine oxide (Cyanex-923), SCYN and sorption of Pu(IV), Am(III) and Eu(III) from HNO₃ solutions was studied batchwise. Several parameters, like time of equilibration, HNO₃ and Pu(IV) concentrations were varied. The uptake of Pu(IV) from 3.0M HNO₃ followed the order SCMPO>SCYN>SKSM>STBP. With increasing HNO₃ concentration, D _Pu increased up to 3.0M of HNO₃ for STBP, SKSM and SCMPO and then decreased. In the case of Am and Eu with SCMPO, the D values initially increased between 0.5 to 1.0M of HNO₃, remained constant up to 5.0M and then slightly decreased at 7.5M. Also, the effects of NaNO₃, Nd(III) and U(VI) concentrations on the uptake of Am(III) from HNO₃ solutions were evaluated. With increasing NaNO₃ concentration up to 3.0M, D _Am remained almost constant while it was observed that it decreases drastically by adding Nd(III) or U(VI). The uptake of Pu and Am from synthetic pressurized heavy water reactor high level waste (PHWR-HLW) in presence of high concentrations of uranium and after depleting the uranium content, and finally extraction chromatographic column separation of Pu and Am from U-depleted synthetic PHWR-HLW have been carried out. Using SCMPO, high sorption of Pu, Am and U was obtained from the U-depleted HLW solution. These metal ions were subsequently eluted using various reagents. The sorption results of the metal ions on silica-gel impregnated with several phosphorus based extractants have been compared. The uptake of Am, Pu and rare earths by SCMPO has been compared with those where CMPO was sorbed on Chromosorb-102, Amberchrom CG-71 and styrene divinylbenzene copolymer immobilized in porous silica particles.     

Autofluorescence characterization of advanced glycation end products of hemoglobin

This article describes the analysis of autofluorescence of advanced glycation end products of hemoglobin (Hb-AGE). Formed as a result of slow, spontaneous and non-enzymatic glycation reactions, Hb-AGE possesses a characteristic autofluorescence at 308/345 nm (lambda(ex)/lambda(em)). Even in the presence of heme as a quenching molecule, the surface presence of the glycated adduct gave rise to autofluorescence with the quantum yield of 0.19. The specificity of monoclonal antibody developed against common AGE structure with Hb-AGE was demonstrated using reduction in fluorescence polarization value due to increased molecular volume while binding. The formation of fluorescent adduct in hemoglobin in the advanced stage of glycation and the non-fluorescent HbA(1c) will be of major use in distinguishing and to know the past status of diabetes mellitus. While autofluorescence correlated highly with HbA(1c) value under in vivo condition (r = 0.85), it was moderate in the clinical samples (r = 0.55). The results suggest a non-linear relation between glycemia and glycation, indicating the application of Hb-AGE as a measure of susceptibility to glycation rather than glycation itself.     

Small-angle X-ray study of air-dried elastoidin using three- and one- dimensional correlation functions obtained from slit-smeared intensity

In the present paper an isotropic sample of air-dried elastoidin has been studied considering it to be a non-ideal two-phase densely packed system after the theories by Vonk [1]. The relevant important physical parameters obtained for the sample areE, the width of the transition layer,D, the average periodicity transverse to the layers, S/V, the specific inner surface ₁ and ₂, the volume fraction of two phases, i. e. matter and void,l ₁ andl ₂ the transversal lengths,l _r, the range of inhomogeneity,l _c, the length of coherence and 2E/D, the volume fraction of the transition layer. The values ofE obtained by two approches as given by Vonk [1] and Ruland [2] show but a small difference indicating the correctness of the analysis.     

Use of HPTLC,HPLC, and Densitometry for Qualitative Separation of Indole Alkaloids from Rauvolfia serpentina Roots

JPC – Journal of Planar Chromatography – Modern TLC - High-performance thin-layer chromatography (HPTLC) has been used for normal-phase separation of the components of hexane,...     

Polymerization of acrylamide with persulfate–thiomalic acid initiator

The redox system of potassium persulfate–thiomalic acid (I₁–I₂) was used to initiate the polymerization of acrylamide (M) in aqueous medium. For 20–30% conversion the rate equation is where R_p is the rate of polymerization. Activation energy is 8.34 kcal deg^?1 mole^?1 in the investigated range of temperature 25–45°C. M_n is directly proportional to [M] and inversely to [I₁]. The range of concentrations for which these observations hold at 35°C and pH 4.2 are [I₁] = (1.0–3.0) × 10^?3, [I₂] = (3.0–7.5) × 10^?3, and [M] = 5.0 × 10^?2–3.0 × 10^?1 mole/liter.     

Novel feature extraction technique for fuzzy relational clustering of a flexible dopamine reuptake inhibitor

This paper describes a novel clustering methodology for classifying over 700 conformations of a flexible analogue of GBR 12909, a dopamine reuptake inhibitor that has completed phase I clinical trials as a treatment for cocaine abuse. The major aspect of the clustering methodology includes an efficient data-conditioning scheme where a systematic feature extraction procedure based on the structural properties of the molecule was used to reduce the associated feature space. This allowed region-specific clustering that focused on individual pharmacophore elements of the molecule. For clustering of the reduced feature set, the fuzzy clustering partitional method was utilized. Due to the relational nature of the feature data, fuzzy relational clustering was employed, and it successfully detected natural groups defined by rotational minima around N(sp(3))-C(sp(3)), O(sp(3))-C(sp(3)), and C(sp(3))-C(sp(2)) bonds. The proposed clustering methodology also employed several cluster validity measures, which corroborated the partitions produced by the clustering technique and agreed with the results of hierarchical clustering using the XCluster program. Representative structures which exhibited a reasonable spread of energies and showed good spatial coverage of the conformational space were identified for use as putative bioactive conformations in a future Comparative Molecular Field Analysis of GBR 12909 analogues. The clustering methodology developed here is capable of handling other computational chemistry problems, and the feature extraction technique can be easily generalized to other molecules.     

α-Hydroxymethylation of conjugated nitroalkenes via the Morita-Baylis-Hillman reaction

The Morita-Baylis-Hillman reaction (MBHR) of conjugated nitroalkenes has been successfully carried out for the first time. A variety of aromatic and heteroaromatic nitroalkenes react with formaldehyde at room temperature in the presence of stoichiometric amounts of imidazole and catalytic amounts of anthranilic acid in THF providing moderate to good yields of the multifunctional adducts in most of the cases.