Laser-diode pumped heavy-doped Yb:YAG ceramic lasers

Laser performance of heavy-doped Yb:YAG ceramics was investigated using a two-pass pumping miniature laser configuration. Slope efficiency of 52% and optical-to-optical efficiency of 48% have been achieved for 1-mm-thick YAG ceramic doped with 20 at.% ytterbium ions. Laser spectra of Yb:YAG ceramic and single-crystal lasers were addressed under different intracavity laser intensities. Heavy-doped Yb:YAG ceramic is more suitable for a thin disk laser than a single-crystal with the same Yb(3+)-ion lasants.     

Converging-axicon-based radially polarized ytterbium fiber laser and evidence on the mode profile inside the gain fiber

The radially polarized mode is achieved from an active Yb fiber by utilizing of an intracavity converging axicon, where the axicon acts as a TM(01) mode selector based on not only its Brewster convex surface but also the distance between its vertex and plane output coupler. The polarization state of the annular laser beam is checked by using a home-made eight-hole aperture. Furthermore, an uncoated plane glass plate is inserted into the cavity, and the reflected beam points to the existence of an annular lasing mode inside the gain fiber. The issues for developing high-power radially polarized fiber lasers also are considered.     

Alternating copolymers consisting of arylalkyl methacrylates. II. Effect of coil collapse on fluorescence spectra of alternating copolymers of 2-(9-carbazolyl)ethyl methacrylate and aromatic vinyl monomers

Alternating and random copolymers of 2-(9-carbazolyl)ethyl methacrylate with aromatic vinyl monomers were synthesized and their fluorescence properties were compared in good and poor solvents. Contraction of the polymer coils induced the hypochromic effect, i.e., the mutual interaction of the ground-state chromophores, but caused little quenching of their excited state. This is sharp in contrast with the vinyl-type of polymers, exhibiting large interactions in both the ground and excited states. Introduction of bulky groups on the comonomers in the alternating copolymers further suppressed these interactions. © 1996 John Wiley & Sons, Inc.     

Essential independent sets and Hamiltonian cycles

An independent set S of a graph G is said to be essential if S has a pair of vertices distance two apart in G. We prove that if every essential independent set S of order k ≥ 2 in a k-connected graph of order p satisfies max {deg v:v ϵ S} ≥ ½ p, then g is hamiltonian. This generalizes the result of Fan (J. Combinatorial Theory B 37 (1984), 221–227). If we consider the essential independent sets of order k + 1 instead of k in the assumption of the above statement, we can no longer assure the existence a hamiltonian cycle. However, we can still give a lower bound to the length of a longest cycle. © 1996 John Wiley & Sons, Inc.     

Structure and properties of new olefin polymers

The relationship between molecular structures and physical properties of linear low density polyethylenes (LLDPEs) produced with single-site catalyst (SSC) was investigated. SSC polymerized LLDPE have excellent physical properties corresponding to its homogeneous molecular structure that had never been achieved by conventional Ziegler-Natta catalysts. It was found that some SSCs have the capability to produce LLDPEs with narrow molecular weight distribution but excellent melt properties. This result suggests that there exist long chain branches in these LLDPEs.     

Tolerance,bioaccumulation and biotransformation of arsenic in freshwater prawn (Macrobrachium rosenbergii)

Tolerance bioaccumulation and biotransformation of arsenic compounds by a freshwater prawn (Macrobrachium rosenbergii) were investigated. M. rosenbergii was exposed to 10, 20, 30 and 35 μg As cm⁻³ of disodium arsenate [abbreviated as As(V)], 25, 50, 100 and 120 μg As cm⁻³ of methylarsonic acid (MMAA), or 100,200, 300 and 350 μg As cm⁻³ of dimethylarsinic acid (DMAA). Tolerances (50% lethal concentration: LC₅₀) of the prawn against As(V), MMAA, and DMAA were 30, 100, and 300 μg As cm⁻³, respectively. The prawn accumulated arsenic compounds directly from aqueous phase and biotransformed them in part. Both methylation and demethylation of the arsenicals were observed in vivo. Highly methylated and less toxic arsenicals were less accumulated in M. rosenbergii.     

Synthesis of functional polymers bearing pendant mono-and oligo-saccharide residues

The present paper focuses on (i) a new synthetic methodology to prepare vinyl ether-based synthetic glycoconjugates (glycopolymers) with well-controlled structure, and on (ii) the application of glycopolymers bearing modified disaccharide residue as thermotropic liquid crystalline (LC) materials. Two vinyl ethers (VEs) having pendant glucose residues with their hydroxyl functions protected by acetyl and isopropylidene groups, respectively, were found to undergo living cationic polymerization initiated by a HI/ZnI2-initiating system. Deprotection of the resultant monodisperse polymers led to water-soluble polymers bearing a pendant glucose residue. Sequential living block copolymerization of glucose-containing VE and alkyl VE, and subsequent deprotection afforded an amphiphilic block copolymer of well-controlled structure. Transmission electron microscopic observation of its cast thin film revealed microphase-separated surface morphologies that varied with varying segment composition ratio. A VE substituted with a heptadecanoated cellobiose pendant was independently prepared, and was cationically polymerized to give a thermotropic LC polymer. From X-ray analysis, the mesophase was assigned to a discotic columnar in type, in which each main chain, extended due to the steric repulsion between the neighboring bulky pendants, was surrounded by three discotic columns.     

Heteroarylthiomethylsilanes. Synthesis and application to heteroarylthiomethylation of carbonyl compounds [1]

Heteroarylthiomethyltrimethylsilanes bearing a 2-pyridyl, 2-imidazolyl, 5-tetrazolyl, or 2-pyrimidinyl group, readily prepared by the reaction of heteroarylmercaptans with halomethyltrimethylsilane in the presence of a base, are synthetic equivalents of heteroarylthiomethyl anions, otherwise inaccessible, and are effective reagents for the introduction of a heteroarythiomethyl group at a carbonyl carbon atom in the presence of a catalytic amount of tetrabutylammonium fluoride.