Strain‐Induced Isomerization in One‐Dimensional Metal–Organic Chains

The ability to use mechanical strain to steer chemical reactions creates completely new opportunities for solution‐ and solid‐phase synthesis of functional molecules and materials. However, this strategy is not readily applied in the bottom‐up on‐surface synthesis of well‐defined nanostructures. We report an internal strain‐induced skeletal rearrangement of one‐dimensional (1D) metal–organic chains (MOCs) via a concurrent atom shift and bond cleavage on Cu(111) at room temperature. The process involves Cu‐catalyzed debromination of organic monomers to generate 1,5‐dimethylnaphthalene diradicals that coordinate to Cu adatoms, forming MOCs with both homochiral and heterochiral naphthalene backbone arrangements. Bond‐resolved non‐contact atomic force microscopy imaging combined with density functional theory calculations showed that the relief of substrate‐induced internal strain drives the skeletal rearrangement of MOCs via 1,3‐H shifts and shift of Cu adatoms that enable migration of the monomer backbone toward an energetically favorable registry with the Cu(111) substrate. Our findings on this strain‐induced structural rearrangement in 1D systems will enrich the toolbox for on‐surface synthesis of novel functional materials and quantum nanostructures.     

Trapping of a Highly Reactive Oxoiron(IV) Complex in the Catalytic Epoxidation of Olefins by Hydrogen Peroxide

The generation of a nonheme oxoiron(IV) intermediate, [(cyclam)Fe^IV(O)(CH₃CN)]²⁺ ( 2 ; cyclam=1,4,8,11‐tetraazacyclotetradecane), is reported in the reactions of [(cyclam)Fe^II]²⁺ with aqueous hydrogen peroxide (H₂O₂) or a soluble iodosylbenzene (sPhIO) as a rare example of an oxoiron(IV) species that shows a preference for epoxidation over allylic oxidation in the oxidation of cyclohexene. Complex 2 is kinetically and catalytically competent to perform the epoxidation of olefins with high stereo‐ and regioselectivity. More importantly, 2 is likely to be the reactive intermediate involved in the catalytic epoxidation of olefins by [(cyclam)Fe^II]²⁺ and H₂O₂. In spite of the predominance of the oxoiron(IV) cores in biology, the present study is a rare example of high‐yield isolation and spectroscopic characterization of a catalytically relevant oxoiron(IV) intermediate in chemical oxidation reactions.     

Novel silicon-based alternating copolymers: synthesis,photophysical properties,and tunable EL colors

We synthesized novel silicon-based alternating copolymers for tunable electroluminescent (EL) colors by Heck synthetic method. Their thermal, photophysical and electroluminescent properties were studied. Most of them exhibited a blue-green EL color at the operating voltage of lower than 12 V. Unusually, we observed the white EL color from a EL device based on SiPhPVK. From photophysical studies and the time-resolved PL spectroscopies, it might be attributed to the formation of stabilized excited state in SiPhPVK. Furthermore, in order to reduce the operating voltage of their LED with increasing the electron affinity of the main chain in silicon-based alternating copolymers, we synthesized the silicon-based copolymers containing electron transporting oxadiazole units in main chain. We also studied their photophysical and electroluminescent properties.     

Imide-siloxane block copolymer/silica hybrid membranes: preparation, characterization and gas separation properties

Imide-siloxane block copolymer/silica hybrid membranes with covalent bonds were prepared via sol–gel reaction. The structural informations of these hybrid membranes were obtained by using Fourier transform-infrared spectrometry (FT-IR), ²⁹Si nuclear magnetic resonance (²⁹Si NMR), XPS and thermogravimetric analysis (TGA). The gas separation properties of the hybrid membranes were also investigated in terms of organosiloxane (PDMS) or silica content at various temperatures. In the hybrids, the addition of PDMS phase increased the permeabilities of gases such as He, CO₂, O₂, and N₂, indicating that the gas transport occurred mainly through rubbery organic matrix. Meanwhile, the PDMS phase contributed the decreased gas selectivities to nitrogen but the reduction in selectivities was very small in comparison with other siloxane containing polymeric membranes. This might be due to the restriction of chain mobility by the existence of inorganic component such as silica network in the hybrids. Additionally, the increase of silica content in these hybrid membranes considerably retarded the falling-off of gas selectivity at elevated temperature. The increase of silica content in hybrid membranes resulted in well-formed silica networks and hence these inorganic components restricted the plasticization of organic matrix by the thermal segmental motion of organic components, leading to preventing the large decrease of the gas selectivity.     

Modulation of Foreign Body Reaction against PDMS Implant by Grafting Topographically Different Poly(acrylic acid) Micropatterns

The surface of poly(dimethylsiloxane) (PDMS) is grafted with poly(acrylic acid) (PAA) layers via surface‐initiated photopolymerization to suppress the capsular contracture resulting from a foreign body reaction. Owing to the nature of photo‐induced polymerization, various PAA micropatterns can be fabricated using photolithography. Hole and stripe micropatterns ≈100‐µm wide and 3‐µm thick are grafted onto the PDMS surface without delamination. The incorporation of PAA micropatterns provides not only chemical cues by hydrophilic PAA microdomains but also topographical cues by hole or stripe micropatterns. In vitro studies reveal that a PAA‐grafted PDMS surface has a lower proliferation of both macrophages (Raw 264.7) and fibroblasts (NIH 3T3) regardless of the pattern presence. However, PDMS with PAA micropatterns, especially stripe micropatterns, minimizes the aggregation of fibroblasts and their subsequent differentiation into myofibroblasts. An in vivo study also shows that PDMS samples with stripe micropatterns polarized macrophages into anti‐inflammatory M2 macrophages and most effectively inhibits capsular contracture, which is demonstrated by investigation of inflammation score, transforming‐growth‐factor‐β expression, number of macrophages, and myofibroblasts as well as the collagen density and capsule thickness.     

Inhibitory Effect of Lupeol on MMPs Expression using Aged Fibroblast through Repeated UVA Irradiation

In this study, the aged dermal fibroblast model was constructed by repeated irradiation with UV light and the effect of lupeol, a triterpenoid, on anti‐aging was confirmed. SA‐β‐galactosidase (SA‐β‐gal) stained aged cells increased by about 40% and expression of p‐p53, p21, p16 and MMPs (MMP‐1, ‐2, ‐3) increased in aged fibroblast. As an efficacy result, the treatment of lupeol on aged fibroblast induced by UVA repeated irradiation showed a dose‐dependent reduction of SA‐β‐gal stained aged cells, the expression of p‐p53, p21, p16 and inhibition of MMPs. Interestingly, lupeol increased dephosphorylation of p‐ERK in repeated UV irradiated conditions. Additionally, lupeol compensated MMPs expression when p‐ERK phosphorylation was inhibited by p‐ERK inhibitor PD98059. Thus, these results showed that lupeol has a possible effect on MMPs expression using inhibition of the p‐ERK pathway. Taken together, we confirmed that lupeol inhibits senescence through inhibiting MMP‐1, ‐2, ‐3 as well as p‐p53, p21 and p16 expression and SA‐β‐gal activity in repeated UVA‐irradiated senescent FB models, therefore suggesting that lupeol may be useful as an anti‐aging agent.     

Styrene‐N‐phenylacrylamide co‐polymer modified silica monolith particles with an optimized mixing ratio of monomers as a new stationary phase for the separation of peptides in high performance liquid chromatography

A stationary phase was prepared by chemical derivatization of the support particles with a layer of copolymer composed of styrene and N‐phenyl acrylamide. Silica monolith particles of ca. 2.6 µm (volume‐based average) have been prepared as the support particles by sol‐gel reaction followed by differential sedimentation. The particles were reacted with 3‐chloropropyl trimethoxysilane followed by sodium diethyldithiocarbamate to introduce an initiator moiety. Then, the copolymer layer was immobilized via reversible addition‐fragmentation transfer polymerization. The resultant phase was packed in glass‐lined stainless‐steel micro‐columns (1 x 150 mm) and evaluated for the separation of a mixture composed of five peptides (Trp‐Gly, Thr‐Tyr‐Ser, angiotensin I, isotocin and bradykinin). The effect of monomer mixing ratio (styrene versus N‐phenyl acrylamide) on the chromatographic separation efficiency of the stationary phase was examined. A number of theoretical plates (N) as high as 33 600 plates/column (224 000 plates/m, 4.46 µm plate height) was achieved using the column packed with the optimized stationary phase. The column‐to‐column reproducibility based on three columns packed with three different batches of stationary phase was found satisfactory in separation efficiency, retention factor, and asymmetry factor.     

An optimized mixed‐mode stationary phase based on silica monolith particles for the separation of peptides and proteins in high‐performance liquid chromatography

A phase with both hydrophobic and hydrophilic functionalities has been synthesized by modification of ground silica monolith particles with C18 and 1‐[3‐(trimethoxysilyl)propyl] urea ligands. A series of phases was prepared by changing the ratio of the two ligands to determine the optimal ratio in view of separation efficiency. The resultant optimized stationary phase was packed in narrow‐bore glass‐lined stainless‐steel columns (1 × 300 mm and 2.1 × 100 mm) and used for the separation of synthetic peptides and proteins. The average numbers of theoretical plates (N) of 52 100/column (174 000/m, 5.75 µm plate height) and 35 500/column (118 000/m, 8.47 µm plate height) were achieved with the 300 mm column at a flow rate of 25 µL/min (0.86 mm/s) in 60:40 v/v acetonitrile/30 mM aqueous ammonium formate for the mixture of peptides (Thr‐Tyr‐Ser, Val‐Ala‐Pro‐Gly, angiotensin I, isotocin, and bradykinin) and for the mixture of proteins (myoglobin, human serum albumin, and insulin), respectively. Fast analysis of the peptides and proteins was also carried out at a flow rate of 0.9 mL/min (6.88 mm/s) with the 100 mm column and all the analytes were eluted within 2 min with good separation efficiency.     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715