Interface structure and misfit relaxation in YBa2Cu3O7‐δ/PrBa2Cu3O7‐δ heterostructures on SrTiO3(001) substrates

Structural properties of YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterointerfaces have been investigated by aberration‐corrected electron microscopy. Experimental evidence shows that c‐axis‐oriented YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterostructures with atomically sharp interface epitaxially grow on SrTiO₃(001) substrates. In terms of the contrast analysis, no apparent interdiffusion between YBa₂Cu₃O_7‐δ and PrBa₂Cu₃O_7‐δ occurs at the interface. In addition, stand‐off misfit dislocations and planar faults appear within PrBa₂Cu₃O_7‐δ layer near the interface. Both misfit dislocations and interfacial dislocations resulting from the termination of planar faults contribute to misfit relaxation at the YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ interface. The defect configuration of planar faults and stand‐off misfit dislocations is explored. Copyright © 2013 John Wiley & Sons, Ltd.     

A new asymmetric Pseudo‐Voigt function for more efficient fitting of XPS lines

Asymmetric peak profiles for the application in spectroscopy can be obtained in a simple way by substituting the usually constant full width at half maximum parameter in Pseudo‐Voigt functions with an energy‐dependent expression, for instance of sigmoidal shape. While this approach has been successfully applied to vibrational spectra, we find that the resulting curves are less suitable for least‐squares fits of X‐ray photoelectron spectroscopy (XPS) data. However, if one additionally allows a variable displacement of the sigmoidal step relative to the peak, excellent fitting results can be obtained. We demonstrate the applicability of our extended approach on several inherently asymmetric XPS lines, i.e. the C 1s signal of graphite and C₂H₂/Pd(100), the 3d_5/2–3d_3/2 doublet of palladium, and the 4f_7/2–4f_5/2 doublet of platinum. Comparison of the corresponding fit results with the results obtained by the application of more elaborate, theory‐based line profiles (Doniach‐?unji? and Mahan functions) shows that the modified Pseudo‐Voigt function gives practically identical results in terms of peak shape and area, while requiring much less computational effort since no convolution procedures are required for its calculation. Thus, this function is most suitable for application in one of the following situations: (i) the peak shape of a given signal is known but cannot be calculated with ease, and (ii) the theoretical peak shape is not (yet) known, however, one wants to perform a first quantitative screening of the data at issue. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Precise characterization method of antibody‐conjugated magnetic nanoparticles for pathogen detection using stuffer‐free multiplex ligation‐dependent probe amplification

Antibody‐conjugated magnetic nanoparticles (Ab‐MNPs) have potential in pathogen detection because they allow target cells to be easily separated from complex sample matrices. However, the sensitivity and specificity of pathogen capture by Ab‐MNPs generally vary according to the types of MNPs, antibodies, and sample matrices, as well as preparation methods, including immobilization. Therefore, achieving a reproducible analysis utilizing Ab‐MNPs as a pathogen detection method requires accurate characterization of Ab‐MNP capture ability and standardization of all handling processes. In this study, we used high‐resolution CE‐single strand conformational polymorphism coupled with a stuffer‐free multiplex ligation‐dependent probe amplification system to characterize Ab‐MNPs. The capture ability of Ab‐MNPs targeting Salmonella enteritidis and nine pathogens, including S. enteritidis, was analyzed in phosphate buffer and milk. The effect of storage conditions on the stability of Ab‐MNPs was also assessed. The results showed that the stuffer‐free multiplex ligation‐dependent probe amplification system has the potential to serve as a standard characterization method for Ab‐MNPs. Moreover, the precise characterization of Ab‐MNPs facilitated robust pathogen detection in various applications.     

Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of estrogens in environmental water samples using 1,3‐dipentylimidazolium hexafluorophosphate ionic liquid as extraction solvent in dispersive liquid–liquid microextraction

In this work, the potential of a symmetric dialkyl‐substituted ionic liquid (IL), 1,3‐dipenthylimidazolium hexafluorophosphate ([PPIm][PF₆]), as extraction solvent in dispersive liquid–liquid microextraction (DLLME) has been studied for the analysis of a group of three natural (estriol, 17β‐estradiol, and 17α‐estradiol) and four synthetic (17α‐ethynylestradiol, diethylstibestrol, dienestrol, and hexestrol) estrogenic compounds as well as one mycotoxin with estrogenic activity (zearalenone) in different types of water samples (Milli‐Q, mineral, and wastewater). Separation, determination, and quantification were developed by HPLC‐DAD and a fluorescence detector (FD) connected in series. Factors influencing the IL‐DLLME procedure (sample pH, amount of IL, type and volume of disperser solvent, ionic strength, and assistance of vortex agitation) were investigated and optimized by means of a step‐by‐step approach. Once the optimum extraction conditions were established (10 mL of water at pH 8, 60 mg of [PPIm][PF₆], 500 μL of ACN as disperser solvent and vortex agitation for 1 min), the calibration curves of the whole method (IL‐DLLME‐HPLC‐DAD/FD) were obtained and precision and accuracy were evaluated. It was demonstrated that the developed methodology was repeatable, accurate, and selective with limits of detection in the 0.30–0.57 μg/L and 13.8–37.1 μg/L range for FD and DAD, respectively. Relative recovery values were higher than 85% for the different types of water samples and the Student's t test demonstrated that there were not significant differences between the added and the found concentration.