Transport coefficients and defect structure of Sb2−xAgxTe3 single crystals

Incorporation of Ag in the crystal lattice of Sb₂Te₃ creates structural defects that have a strong influence on the transport properties. Single crystals of Sb_2−xAg_xTe₃ (x=0.0; 0.014; 0.018 and 0.022) were characterized by measurements of the temperature dependence of the electrical resistivity, Hall coefficient, Seebeck coefficient and thermal conductivity in the temperature range of 5-300 K. With an increasing content of Ag the electrical resistance, the Hall coefficient and the Seebeck coefficient all decrease. This implies that the incorporation of Ag atoms in the Sb₂Te₃ crystal structure results in an increasing concentration of holes. However, the doping efficiency of Ag appears to be only about 50% of the expected value. We explain this discrepancy by a model based on the interaction of Ag impurity with the native defects in the Sb_2−xAg_xTe₃ crystal lattice. Defects have a particularly strong influence on the thermal conductivity. We analyze the temperature dependence of the lattice thermal conductivity in the context of the Debye model. Of the various phonon scattering contributions, the dominant influence of Ag incorporation in the crystal lattice of Sb₂Te₃ is revealed to be point-defect scattering where both the mass defect and elastic strain play a pivotal role.     

Mixing mechanisms of vortex ring formed by gravity slumping motion

 This paper is concerned with an experimental investigation of the mixing inside the vortex ring formed by the gravity slumping motion of a dense cloud in a less dense atmosphere. The dynamics of the spreading and instantaneous structures of the turbulent flow were examined by visualization, single and multi-point measurements of velocity and concentration for two heavy gases, carbondioxide (CO₂) and dichlorodifluoromethane (CCl₂F₂), in a configuration in that heavy gas, initially trapped in a reservoir, was released with the rise of a shutter into calm air of a sector-shaped dispersion channel. Visualization of the cloud as a whole showed a spreading motion in which an advancing frontal structure was followed by a stratified flow with a layer of dense fluid of higher velocities near the wall and, on top of it, a layer of dilute fluid whose concentration is controlled by the mixing mechanisms within the head. During the course of spreading, there was always a phase in which the head attained to a constant speed of advance, which occurred as 0.13 m/s for CO₂ and 0.48 m/s for CCl₂F₂. It was interesting to observe for CO₂ that the phase of constant speed took place in between two acceleration phases; the former was due to the initial slumping of the cloud at the exit of the reservoir, and the latter was attributed to the collapse of the head on the transition to the passive dispersion phase. Instantaneous two-dimensional velocity field, measured with particle image velocimeter (PIV), showed that the cloud overran the ambient air which caused the approaching dense fluid deflected away from the wall with significant vertical velocities and downstream-moving separation, and the air trapped under the head resulted in the density inversion which introduced further intricacy to the turbulent structure of the head. Instabilities at the upper free shear layer due to density and velocity discontinuity rolled into periodic array of vortices which engulfed a considerable amount of air as they were convected backwards over the head, but the incorporation of heavy and light fluids was completed with the appearance of microscales after the collapse on the stratified layer. Analyses of the cloud head at different downstream locations also revealed that its size remained unchanged when the speed of advance was constant, allowing the rate of change of the cloud volume being modeled with the rate of spreading. Contours of concentration obtained from digitized PIV pictures confirmed the kinematic features of the mixing revealed by the velocity field and that the concentration values within the large structures were higher than those at the upper part of the stratified layer. Motivated by the experimental observations, a semi-empirical analysis was presented to describe the results and based on local values of the Richardson and Reynolds numbers. Received: 4 October 1995 / Accepted: 4 July 1996     

A composite methodology for multistage degradation of polymers

Five different analytical schemes for examining isothermal and nonisothermal degradation of polymers were reviewed and found inadequate for describing multistage decomposition. The different schemes were experimentally tested using thermogravimetric analysis data for an ethylene-vinyl acetate (EVA) copolymer, which exhibited a well-behaved two-step decomposition process in a nitrogen environment. Based on these experimental and analytical findings, a generalized methodology was developed capable of describing the exhibited complex decomposition behavior of polymers by combining two or more kinetic mechanisms in a series or parallel arrangement. This composite of combinational methodology thus extends established analytical schemes for describing complex decomposition of polymers in a rational manner, incorporating both experimental and theoretical considerations.     

Application of thermal analysis to study the causes of disintegration in insulating systems

In the procduction of high-voltage insulating systems, disintegration and non-homogeneity occur in some cases and these factors can lead to the deterioration and even the breakdown such systems. In research into the causes of these phenomena DTA and TG were applied to study the course of hardening of the systems and to quantify the leaking substances. The results demonstrate the great value of thermal analysis in this field.     

Influence of solute mobility on dislocation motion I. Basic model

Dislocation motion in the real lattice of alloys is highly complex. In a certain temperature range the dynamic strain ageing phenomena have been reported. In this paper the influence of mobile solute atoms (as obstacles) on the motion of dislocation is analysed. Both processes are assumed to be thermally activated. A new model based on this assumption is proposed. The dislocation velocity and the friction stress (due to solute-dislocation interactions) are calculated. A change in the friction stress caused by solute mobility is discussed.     

Asymptotic analysis of elastic curved rods

We consider a sequence of curved rods which consist of isotropic material and which are clamped on the lower base or on both bases. We study the asymptotic behaviour of the stress tensor and displacement under the assumptions of linearized elasticity when the cross‐sectional diameter of the rods tends to zero and the body force is given in the particular form. The analysis covers the case of a non‐smooth limit line of centroids. We show how the body force and the choice of the approximating curved rods can affect the strong convergence and the limit form of the stress tensor for the curved rods clamped on both bases. Copyright © 2006 John Wiley & Sons, Ltd.     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.     

Dehydration and dehydroxylation of reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared by the thermal treatment of lithiumsaturated montmorillonite. Samples prepared by mild thermal treatment with lithium contained more water sorbed than the original montmorrilonite. When RCMs were prepared, part of the lithium cations reacted with hydroxyl groups in the octahedral sheet and released protons, which reacted with the structure. Acid treatment probably enhanced the surface area. which was reflected in the amount of water sorbed. Deprotonation of hydroxyl groups was proved by the measurements of the ignition loss. The heating of lithium saturated montmorillonite at higher temperatures brough about the collapse of the interlayers and a decrease in the amount of water sorbed.     

Methane activation on Ni(1 1 1): Effects of poisons and step defects

We have, theoretically and experimentally, investigated the dissociation of methane on the terraces and steps of a Ni(1 1 1) surface. Using Density Functional Theory (DFT) total energy calculations combined with Ultra High Vacuum (UHV) experiments, we find that the steps exhibit a higher activity than the terraces. We have, furthermore, investigated how carbon and sulfur present on the surface will deactivate the steps, leaving only the terraces active. We find the intrinsic sticking probabilities of methane on the steps and terraces at 500 K to be 2.8 × 10⁻⁷ for the steps and 2.1 × 10⁻⁹ for the terraces, in complete agreement with our calculated difference in activation energy of 17 kJ/mol.