FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.     

Preparation and Regioselective Metalation of Bis(trimethylsilyl)methyl‐Substituted Aryl Derivatives

A range of bis(trimethylsilyl)methyl‐substituted aryl derivatives was prepared by using a Kumada–Corriu cross‐coupling reaction. The regioselective metalation of the resulting bis(trimethylsilyl)methyl‐substituted aryl derivatives bearing this bulky silyl group allowed the generation of functionalized aromatics. A regioselective switch in the presence or in the absence of the bis(trimethylsilyl)methyl group has been demonstrated. Furthermore, this silyl group was converted into a formyl group or a styryl group, enhancing the scope of application of such bis(trimethylsilyl)methyl‐substituted arenes.     

Emission Control by Molecular Manipulation of Double‐Paddled Binuclear PtII Complexes at the Air‐Water Interface

Molecular functions depend on conformations and motions of the corresponding molecular species. An air–water interface is a suitable asymmetric field for the control of molecular conformations and motions under a small applied force. In this work, double‐paddled binuclear Pt^II complexes containing pyrazole rings linked by alkyl spacers were synthesized and their orientations and emission properties dynamically manipulated at the air–water interface. The complexes emerge from water with concurrent variation of interface orientation of the planes of the Pt^II complexes from perpendicular to parallel during mechanical compression suggesting a unique ‘submarine emission‘. Phosphorescence of the complexes is quenched at the air–water interface prior to monolayer formation with intensities subsequently rapidly increasing during monolayer compression. These results indicate that asymmetric reactions and motions might be controlled by applying mechanical force at the air–water interface.     

Protonation susceptibility of functional groups: A new parameter for interpreting chemical ionization mass spectra of bifunctional organic compounds

A new parameter, the protonation susceptibility (PS), of functional groups in the chemical ionization mass spectrometry of bifunctional organic compounds is presented. In terms of quasi-equilibrium theory of unimolecular decomposition of the molecular protonated ion of [MH]⁺, the relative PS corresponds to the relative area under P(E) curves of [MH]⁺ ions that have a proton at different functional groups. Numerical evaluation of the PS values of pertinent functional groups was made by using particularly selected compounds. The results clearly indicate that PS is independent of proton affinity (PA).     

Raman and infrared spectra of the all-trans, 7-cis, 9-cis, 13-cis and 15-cis isomers of β-carotene: Key bands distinguishing stretched or terminal-bent configurations form central-bent configurations

Raman and infrared spectra in the region of 1800-150 cm⁻¹ were recorded for a set of cis-trans isomers of d̃-carotene, i.e. the all-trans, 7-cis, 9-cis, 13-cis and 15-cis isomers. Spectral comparison revealed Raman and infrared key bands which (1) distinguish stretched or terminal-bent configurations (all-trans, 7-cis and 9-cis) from central-bent configurations (13-cis and 15-cis), and (2) distinguish unmethylated 7-cis and 15-cis configuratios. Keybands (1) include Raman bands at 1160 and 1140 cm⁻¹ and infrared bands at 825 and 775 cm⁻¹ (the intensity varies with the position of the cis-bend) Key bands (2) include Raman bands at 1274 and 962 cm⁻¹ and an infrared band at 741 cm⁻¹ (characteristic of the 7-cis configuration), and also a Raman band at 1247 cm⁻¹ and an infrared band at 775 cm⁻¹ (characteristic of the 15-cis configuration). The normal modes for the key bands were determined by a set of normal coordinate calculations for the isomeric configurations of a simplified model of d̃-carotene. The key bands were mainly related to the C H in-plane bendings, coupled with the CC or C C stretching, or to the C H out-of-plane wagging vibrations, some of which coupled with the CC torsion.     

Nano-structured surfaces on Ni–Ti generated by multiple shots of interfering femtosecond laser

Combined periodic structures composed of micron-sized periodic structure and nano-sized quasi periodic structure were generated on Ni–Ti target by multiple shots of interfering femtosecond laser beams. The micron-sized structure was generated by the interference pattern of four beams, and the nano-sized quasi period was generated due to the multiple shot effect of femtosecond laser. The structures were investigated in detail by two-dimensional fast Fourier transform (2D-FFT). The power spectra showed small spots and fuzzy spots due to precise period and quasi period, respectively. The most major size of the quasi periodic structure was 580 nm.     

The effect of various calcination treatments on the photocatalytic activity of a rod-type TiO<Subscript>2</Subscript> electrode for oxidation of ethanethiol

It was found that the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes were affected by various post-calcination treatments, for example, calcination in NH₃ or under vacuum. Post-calcination treatment in NH₃ at 773 K was particularly effective in increasing the photoelectrochemical performance and photocatalytic activity of rod-type TiO₂ electrodes. A unique photoelectrochemical circuit was constructed by connecting a rod-type TiO₂ electrode to a Pt electrode through a silicon solar cell in which the negative bias was applied on the rod-type TiO₂ electrode. It was found that the photoelectrochemical circuit can effectively oxidize ethanethiol in water into CO₂.