Catalytic flow-injection determination of copper at nanogram levels by using color formation of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of pyridine and ammonia as activators

A spectrophotometric flow-injection method for determining copper(II) has been developed. It is based on the catalytic effect of copper(II) on the oxidative coupling of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of hydrogen peroxide. Pyridine and ammonia as activators increased the absorbance for the copper(II)-catalyzed coloration, and the dye formed was stabilized by adding a non-ionic surfactant. The working range of the method was 0.1-2.0 ng ml(-1) of cooper(II) with a relative standard deviation 2.4% at a sampling rate of 30 h(-1). Interference from iron(III) was effectively suppressed by citric acid. Copper in natural water samples can be determined easily.     

Site-selective RNA cleavage by DNA bearing a base pair-mimic nucleoside

We have synthesized the deoxyadenosine derivative tethering a phenyl group (X), which mimics the Watson-Crick A/T base pair. The RNA/DNA hybrid duplexes containing X in the middle of the DNA sequence showed a similar thermal stability regardless of the ribonucleotide species (A, G, C, or U) opposite to X, probably because of the phenyl group stacking inside of the duplex accompanied by the opposite ribonucleotide base flipped in an extrahelical position. The RNA strand hybridized with the DNA strand bearing X was cleaved on the 3'-side of the ribonucleotide opposite to X in the presence of MgCl2, and the RNA sequence to be cleaved was not restricted. The site-specific RNA hydrolysis suggests that the DNA strand bearing X has the advantage of the site-selective base flipping in the target sequence and the development of a "universal deoxyribozyme" to exclusively cleave a target RNA sequence.     

Synthesis of human renin inhibitory peptides, angiotensinogen transition-state analogs containing a retro-inverso amide bond

The experimental details for the synthesis of human renin inhibitors are described. In order to avoid metabolic degradation of the Phe-His (P3-P2) amide bond in transition-state analogs, structurally modified acyl residues (P4-P3) were incorporated into the inhibitors. Compound 1a, which contained 2-(1-naphthylmethyl)-3-(N-phenethylcarbamoyl)propionyl residue (P4-P3) with a retro-inverso amide bond, L-histidine, and norstatine isoamylamide residue (P1-P1) as a transition-state mimic, had potent human renin inhibitory activity, and it lowered blood pressure when administered orally to common marmosets.     

Effects of Al concentration and resulting long-period superstructures on the plastic properties at room temperature of Al-rich TiAl single crystals

The role of Al₅Ti₃ and h-Al₂Ti long-period superstructures on the plastic properties of TiAl at room temperature is investigated on five single crystals with aluminium content comprised between 54.7 at.%, and 62.5 at.%. After annealing at 1200°C for 1?h, the Al₅Ti₃ superstructure develops in the L1₀ (γ) matrix upon increasing Al concentration except for Ti–62.5 at.%Al where h-Al₂Ti substitutes for Al₅Ti₃. The CRSS for <110]{111} first increases abruptly with the development of the Al₅Ti₃-type ordering. Then, the CRSS reaches a plateau at which dislocations assemble in groups of four to prevent extra anti-phase boundary (APB) from being engendered during glide throughout the Al₅Ti₃ phase. In Ti–62.5 at.%Al, the CRSS for ordinary slip further increases upon the precipitation of h-Al₂Ti in the L1₀ phase, whereas it decreases when the crystal is fully transformed into single-phased Al₅Ti₃. <101] superlattice dislocations are primarily activated under both the [210] and [1?1?8.6] load orientations irrespective of the Al concentration, but the dislocation microstructure strongly depends on orientation as well as on the degree of Al₅Ti₃ ordering. In the [210] orientation, the frequency of the decomposition of <101] dislocations into 1/2<110] and 1/2<112] dislocations decreases abruptly with the development of Al₅Ti₃. This is interpreted in terms of the increased difficulty to move ordinary dislocations. Under the [1?1?8.6] orientation, the density of faulted dipoles diminishes remarkably with the development of Al₅Ti₃. This is consistent with the transformation of the low energy extrinsic stacking fault of the L1₀ phase into a higher energy complex extrinsic stacking fault.     

High performance a-Si solar cells and new fabrication methods for a-Si solar cells

The super chamber, a separated UHV reaction-chamber system has been developed. A conversion efficiency of 11.7% was obtained for an a-Si solar cell using a high-quality i-layer deposited by the super chamber, and a p-layer fabricated by a photo-CVD method.As a new material, amorphous superlattice-structure films were fabricated by the photo-CVD method for the first time. Superlattice structure p-layer a-Si solar cells were fabricated, and a conversion efficiency of 10.5% was obtained.For the fabrication of integrated type a-Si solar cell modules, a laser pattering method was investigated. A thermal analysis of the multilayer structure was done. It was confirmed that selective scribing for a-Si, TCO and metal film is possible by controlling the laser power density. Recently developed a-Si solar power generation systems and a-Si solar cell roofing tiles are also described.     

Kinetics of phase transformation from hBN to cBN in the presence of Mg3BN3 catalyst

Abstract

Transformation kinetics from hBN to cBN has been studied at 6 GPa with changing reaction temperature and content of catalyst mixed with hBN powder. At lower catalyst content (3–10 wt %), rate of transformation was extraordinary rapid between 1300 and 1350 C. At higher catalyst content (30–50 wt %), rate of transformation was decreased. Normal nucleation kinetics was observed at about 1500 C. The rapid transformation temperature region correlates characteristic behavior of the sintering process.