A theoretical study of the dehydration and the dehydrogenation processes of alcohols on metal oxides using MOPAC

Using a semi-empirical molecular orbital method, PM3, and 2-propanol as an example, the dehydration and the dehydrogenation processes of alcohol on oxide catalysts were studied. The catalysts addressed here were four kinds of oxides (Al₂O₃, SiO₂, ZnO, CdO) whose reaction selectivities had been experimentally determined. The usual models consisting of a surface metal ion, several oxide ions and an isopropoxy group were used in calculations. For the dehydration, heats of formation of the models were calculated at each point of the process where the distance between a β-hydrogen of the group and a basic site (i.e. oxygen of the group or a surface oxide ion) or a metal ion was gradually shortened, or where the length of the C–O bond of the group was gradually increased. A reasonable dehydration mechanism was estimated by comparing activation energies calculated from the transitions of the heats of formation. The most probable dehydrogenation mechanism was also estimated in a similar way by gradually making an -hydrogen close to a surface oxide ion, the metal ion or a surface proton. It was concluded that the dehydration proceeds by scission of the C–O bond of the group after its oxygen was attacked by some electrophile on the surface and that the dehydrogenation proceeds by a mechanism in which an -hydrogen of the group was extracted by the metal ion.

Based on the dehydration mechanism thus deduced, alkoxy groups generated by adsorption of the primary, secondary and tertiary alcohols on SiO₂ were calculated in order to estimate the activation energies of their decompositions. In result, the order of the energies was found to be in good agreement with that of the decomposition rates experimentally determined by Kitahara. This agreement gives support to the validity of the mechanism deduced for the dehydration of alcohol.     

Fibrinolytic effect of tissue plasminogen activator on cerebral embolism in stroke-prone spontaneously hypertensive rats.

To study the thrombolytic effect of tissue plasminogen activator (t-PA) on cerebral emboli, we characterized cerebral embolization in stroke-prone spontaneously hypertensive rats (SHRSPs) and Wistar Kyoto rats (WKYs). [125I]Fibrin clot particles (20-100 microns diameter) were injected twice at an interval of 90 min into the left internal carotid artery of WKYs and SHRSPs. After each injection, spontaneous embolus dissolution was monitored with a gamma-ray detector placed on the head of the embolic rats. Embolus dissolution was spontaneously generated in 15 min after the injection of fibrin clots. In WKYs, 21% and 42% of the clots were dissolved 30 and 90 min after the second embolization, respectively. On the other hand, the spontaneous embolus dissolution in SHRSPs was significantly lower than that of WKYs, indicating that the endogenous fibrinolytic ability of SHRSPs is less potent than that of normotensive rats. The intravenous administration of t-PA at doses of 75, 250 and 750 micrograms/kg caused a dose-dependent embolus dissolution in SHRSPs. Furthermore, systematically applied t-PA produced embolus dissolution without causing systemic plasminogen activation, fibrinogen breakdown or bleeding. In conclusion, the intravenous administration of t-PA produces selective embolus dissolution without systemic fibrino(geno)lysis in a cerebral embolic SHRSP.     

Alkynylzirconation of alkynes and application to one-pot bisalkynylation of alkynes

Stereocontrolled alkynylzirconation of unactivated alkynes was achieved by the reaction of an alkyne with Cp2ZrEt2 and alkynyl halide in this order. After hydrolysis of the alkynylzirconation product, trisubstituted enyne derivatives were obtained in good yields. Functionalized enynes were also prepared by the reaction of the alkynylzirconation products with a variety of electrophiles. Subsequent addition of the second alkynyl halide to the alkynylzirconation products provided an in situ protocol for bisalkynylation of alkynes into (Z)-enediynes in good yields.     

Phagostimulatory effect of uptake of PLGA microspheres loaded with rifampicin on alveolar macrophages

In this work we obtain the thermodynamic properties of mixed (1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine) PC and (1-stearoyl-2-oleoyl-sn-glycero-3-phospho-l-serine (sodium salt)) PS monolayers. Measurements of compressibility (isotherms, bulk modulus, and excess area per molecule) and surface potential show that the properties of monolayers at the air–water interface depend on the concentration of ions (Na⁺ and K⁺) and the proportion of PS in the mixture. The dependence on PS arises because the molecule is originally bound to a Na⁺ counterion; by increasing the concentration of ions the entropy changes, creating a favorable system for the bound counterions of PS to join the bulk, leaving a negatively charged molecule. This change leads to an increase in electrostatic repulsions which is reflected by the increase in area per molecule versus surface pressure and a higher surface potential. The results lead to the conclusion that this mixture of phospholipids follows a non ideal behavior and can help to understand the thermodynamic behavior of membranes made of binary mixtures of a zwitterionic and an anionic phospholipid with a bound counterion.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

Preparation and characterization of polypropylene/mesoporous silica nanocomposites with confined polypropylene

Polypropylene (PP)/Ti-MCM-41 nanocomposites were prepared by isospecific propylene polymerization with Ti-MCM-41/Al(i-C₄H₉)₃ catalyst. The cross polarization/magic angle spinning (CP/MAS) ¹³C NMR spectrum of the composite was similar to that of the conventional isotactic PP, and the decrease in the pore volume of Ti-MCM-41 in the nanocomposites, as measured by N₂ adsorption, was consistent with the value calculated from the weight loss in the thermogravimetric analysis (TGA) curve; both these facts attest to propylene polymerization within the mesopores of Ti-MCM-41. Alkali treatment followed by extraction with o-dichlorobenzene allows us to extract the confined PP out of the Ti-MCM-41 mesopores. Although the PP/Ti-MCM-41 nanocomposites do not exhibit a crystalline melting point, the same PP when extracted from the mesopores showed a clear melting point at 154.7 °C; this indicates that the crystallization of PP confined in mesopores is strongly hindered. For the PP polymerized within the confinement, the molecular weight (M_w) and molecular weight distribution (M_w/M_n) were 84,000 and 4.3, respectively; these values were considerably smaller than those of the PP polymerized concurrently outside the Ti-MCM-41 mesopores (M_w = 200,000–450,000, M_w/M_n = 40–75). Therefore, the confinement also has a marked effect on the molecular weight of the PP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3324–3332, 2003     

Consideration on peak shape in a batch-type chemiluminescence detection cell for capillary electrophoresis

Peak areas, peak heights, and apparent theoretical plate numbers were examined as a function of sample injection times by use of the batch-type CL detection cell. Comparing the experimental data with those obtained by absorption detector, some considerations were carried out about the peak shape. The peak shape in CL detection was influenced by not only concentration distribution of sample in a sample zone but also sample diffusion and CL reaction at the capillary outlet. The sample injection time of ca. 35 s was recommended for the present CE with CL detector. The injection time much influenced peak shape as well as sensitivity in the CL detection cell.     

Facile Insertion of Carbon Dioxide into Cu2(μ‐H) Dinuclear Units Supported by Tetraphosphine Ligands

Reactions of meso‐bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm) with Cu^I species in the presence of NaBH₄ afforded di‐ and tetranuclear copper hydride complexes, [Cu₂(μ‐H)(μ‐dpmppm)₂]X ( 1 ) and [Cu₄(μ‐H)₂(μ₄‐H)(μ‐dpmppm)₂]X ( 2 ) (X=BF₄, PF₆). Complex 1 undergoes facile insertion of CO₂ (1 atm) at room temperature, leading to a formate‐bridged dicopper complex [Cu₂(μ‐HCOO)(dpmppm)₂]X ( 3 ). The experimental and DFT theoretical studies clearly demonstrate that CO₂ insertion into the Cu₂(μ‐H) unit occurred with the flexible dicopper platform. Complex 2 also undergoes CO₂ insertion to give a formate‐bridged complex, [Cu₄(μ‐HCOO)₃(dpmppm)₂]X, during which the square Cu₄ framework opened up to a linear tetranuclear chain.     

Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.     

Nickel‐ and Photoredox‐Catalyzed Cross‐Coupling Reactions of Aryl Halides with 4‐Alkyl‐1,4‐dihydropyridines as Formal Nucleophilic Alkylation Reagents

A combination of nickel and photoredox catalysts promoted novel cross‐coupling reactions of aryl halides with 4‐alkyl‐1,4‐dihydropyridines. 4‐Alkyl‐1,4‐dihydropyridines act as formal nucleophilic alkylation reagents through a photoredox‐catalyzed carbon–carbon (C?C) bond‐cleavage process. The present strategy provides an alternative to classical carbon‐centered nucleophiles, such as organometallic reagents.